2 3
FRONT PANEL
Figure 1. Router front panel view.
1. GSM LED. A solid light indicates proper connection to the GSM network.
2. Reset button.
3. Ethernet socket.
4. Ethernet LED. Asolid light indicates proper connection, blinking light - data transfer.
5. Power LED. Asolid light indicates a proper connection to the power supply.
6. SIM card socket.
7. Power adapter socket.
BACK PANEL(RUT100)
Figure 2. Router back panel view.
1. Wireless LAN antenna connection.
2. GSM antenna connection.
3. Wireless LAN antenna connection.
STEP 1. Preparing 3G Mobile Router
1. Attach Wireless LAN and GSM antennas.
2. Insert the SIM card which was given by your ISP (Internet Service Provider).
3. Connect LAN cable to the computer and 3G Mobile Router
4. Connect the power adapter to the receptor on the front panel of 3G Mobile Router. Then plug the
other end of the power adapter into a wall outlet or power strip.
STEP 2. Configure your computer
1. Click Start => Settings => Control Panel (The Control Panel should be in Classic view).
2. Double click on the Network Connections icon.
3. Right click on the Local Area Connection and select Properties.
4. Scroll down to Internet Protocol (TCP/IP) and press Properties.
5. Select Obtain IPaddress automatically and Obtain DNS serveraddress automatically if they
are not selected.
6. Click OK to close Internet Protocol (TCP/IP) properties.
7. Close Network Connections and Control panel windows.
STEP 3. Access device Web configuration tool
1. Open the Web browser and type IP address 192.168.0.1.
2. Enter the 3G Mobile Router administrator login details to access the Web management:
The default administrator login settings are:
Login: admin
Password: admin01
The main Web management menu is displayed after successful login into the system. To start
quick setup wizard click button Start Now.
STEP 4. Change router login password
STEP 5. Configure wireless network settings
It is recommended to use WPA-PSK with TKIP or AES data encryption. The passphrase for data
encryption must be 8-63 characters long and can include symbols (!?*&_) and spaces. This passphrase must
be the same as Network key in the PC wireless network security settings.
Note: If Open system will be chosen it will let anyone within the range and with proper equipment to
connect to your network.
