Teletics MoNet-2M Manual de usuario

ELETICS

Quickstart Installation Manual

Version 1.3 – January 11 2016!

www.teletics.com !1

Statement of Conformity!

FCC Class A Notice

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions:

1.This device may not cause harmful interference.

2.This device must accept any interference received, including

interference that may cause undesired operation.

Note:This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to Part 15 of the FCC Rules.These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy,

and if it is not installed and used in accordance with the instruction

manual, it may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause

harmful interference, in which case the user will be required to correct

the interference at his own expense.

Modifications:Any modifications made to this device that are not approved

by Teletics Inc. may void the authority granted to the user by the FCC to

operate this equipment.

ICES-003 Class A Notice

This Class A digital apparatus complies with Canadian ICES-003.

Terminology

POTS – Plain Old Telephone Service. This is the type of phone line you get

from a phone company at your house as a one line connection.

Modem – Dial up device used to transmit digital data over phone lines.

Radio – Device used to transmit digital data over any kind of wireless

network, including cellular, wifi, satellite, or private licensed frequencies.

Main Office – This is the “Head Office” location. This is typically where the

program that gathers information is located.

Field Device – This is the device that typically contains or gathers remote

data at a remote location(s).

www.teletics.com !2

Technical Support

Support can be obtained from your Teletics distributor, or by calling Teletics

Technical Support at:

800#314#5010#

Warnings

www.teletics.com !3

The Teletics MoNet may be used over extended

temperature ranges, but must be used in a dry

environment. An enclosure is required for

outdoor use.

The Teletics MoNet is designed to use +5VDC. Third party power

supplies may be used, provided they can supply at least 2A.

The 5VDC power adapter uses a special “twist lock” barrel connector

to ensure the barrel connector stays in place during operation. Please

do not remove the barrel connector without twisting it to allow proper

removal.

!##IMPORTANT##!#

"#$%&'!()*(!+,%!remove&power!-&,.!()/$!%#/(!0'-,&'!12%33/#3!,&!

%#12%33/#3!"()'&#'(!,&!('2'1),#'!4,##'45,#$!,#!()'!6789!,&!67::!

1,&($;!!<*/2%&'!(,!4,.12+!=/()!()/$!.*+!4*%$'!%#&'2/*02'!,1'&*5,#;

Table of Contents

Terminology 2...............................................................................................................

Technical Support 3....................................................................................................

Warnings 3.....................................................................................................................

Table of Contents 4.....................................................................................................

Introduction 5...............................................................................................................

Box Contents 5............................................................................................................

Getting Started 5..........................................................................................................

Activation 6....................................................................................................................

Setting Up a Trial System 6.........................................................................................

MoNet Test System Diagram 7..................................................................................

Next Steps 8..................................................................................................................

Differences between Modem Ports 9......................................................................

Call Progress Tones 9...................................................................................................

LED Status Indications 9.............................................................................................

Hidden Reset Button 9...............................................................................................

Warranty 15..................................................................................................................

Disclaimer 15................................................................................................................

Specifications 16...........................................................................................................

www.teletics.com !4

Introduction

The Teletics MoNet allows regular modems to communicate with each other

over any IP network, including cellular, wifi, private radio, satellite, landline,

cable, or DSL. The IP network can be either private or public.

A single MoNet at a Head Office location can dial multiple remote site

MoNets in a “one to many” basis.

Box Contents

>)'!>'2'54$!?,@'(!0,A!4,#(*/#$!()'!-,22,=/#3B!

•MoNet

•Ethernet cable

•Power Adapter

•Mounting kit for both wall/cabinet mount or DIN rail

Getting Started

If this is your first time using the MoNet, it is recommended that you spend

some time in a bench environment to familiarize yourself with the setup and

programming required prior to a first field installation.

The MoNet ships as a DHCP client, so it will ask for an IP address from

whatever LAN it is plugged into. If it does not receive an IP address from your

LAN, it will eventually wind up at 169.254.1.1 by default.

To find which IP address your new MoNet has, run the Beaconsearch utility,

available from the support section of the Teletics website:

www.teletics.com !5

>'2'54$!D'*4,#$'*&4)!%52/(+!/$!*E*/2*02'!,#!()'!>'2'54$!='0$/('!*(!

===;('2'54$;4,.F$%11,&(G!%#H'&!()'!?,@'(!?*#%*2$!$'45,#;!!!

Activation

I)'#!+,%!&'4'/E'!+,%&!?,@'($G!()'+!=/22!0'!*2&'*H+!*45E*('H!,#!()'!>'2'54$!

?,@'(!$'&E/4';!!J,%!=/22!&'4'/E'!/#-,&.*5,#!,#!()'!('2'1),#'!#%.0'&$!()*(!

*&'!*$$/3#'H!(,!'*4)!?,@'(!67::!1,&(;!

<,&!'A*.12'G!*!(+1/4*2!?,@'(!.*+!0'!3/E'#!()'!1),#'!#%.0'&!KL:LM!999N:L:L!

*#H!KL:LM!999N:L:O!-,&!()'!P&$(!67::!1,&(G!*#H!$'4,#H!67::!1,&(G!&'$1'45E'2+;!

<,&!,#'!?,@'(!(,!H/*2!*!$'4,#H!?,@'(G!*22!()*(!/$!&'Q%/&'H!/$!()*(!0,()!?,@'($!

0'!*R*4)'H!(,!*!ST@!()*(!)*$!/#('&#'(!*44'$$G!*#H!(,!U#,=!()'!#%.0'&!

*$$/3#'H!(,!()'!?,@'(!+,%!*&'!H/*2/#3;!!I)'#!('$5#3!(=,!?,@'(!H'E/4'$!,#!

()'!0'#4)G!0,()!H'E/4'$!$),%2H!0'!4,##'4('H!(,!()'!/#('&#'(G!$/./2*&!(,!=)*(!/$!

$),=!/#!()'!?,@'(!>'$(!V+$('.!W/*3&*.G!0'2,=;!

Setting Up a Trial System

A suitable first bench trial system for MoNet testing consists of:

•Two MoNets (one for field location, one for main office).

•Two RJ45 LAN connections with access to the internet.

•A main office computer running the customers software used to

gather information from the field devices. It may help to have a

separate modem on this system for use with MoNets.

•A modem inside the field device.

•Phone and networking cables.

www.teletics.com !6

MoNet Test System Diagram

>,!1'&-,&.!/#/5*2!('$5#3!,#!(=,!?,@'($G!/(!/$!&'4,..'#H'H!()*(!+,%!4,##'4(!

()'.!*$!-,22,=$B!

This configuration allows a quick check that the Main Office computer can dial

the Field Devices through a MoNet network, prior to introducing outside

internet connections.

If you setup the MoNets as follows, you should be able to make a simple call

from your main computer application, out to the field devices to demonstrate

how the MoNet works.

MoNet # 1 (Main Office)

Phone Number (Modem 1 Port) (212) 555-1212

Phone Number (Modem 2 Port) (212) 555-1213

MoNet # 2 (Field Device)

Phone Number (Modem 1 Port) (212) 555-1214

Phone Number (Modem 2 Port) (212) 555-1215!

www.teletics.com !7

If your Field devices operate at speeds higher than 2400 bps, plug all the

modems in the system into the MoNet Modem jacks that are labeled Modem

1. If your Field Devices operate at 2400 bps only, plug all the modems into the

MoNet Modem 2 Ports.

In our bench test configuration, to have the Main Office computer dial the

Field Device MoNet, the Main Office computer modem should be told to dial

ATDT12125551214 (If using Modem 1 Port) or ATDT12125551215

(Modem 2 Port).

You should hear the two modems connect and you should be able to

communicate between the two ends exactly like you would if there were a

phone line in between.

Any data transfers required by the Main Office to the Field Devices should be

tested prior to field deployment.

Next Steps

Once the trial system is proven successful, these next steps are typically

performed:

•Introduce the communications device that will service the field sites.

This might be a cellular radio, or a private network connection, or a

wifi router.

•Decide on the network integration with the main office. Teletics can

assist you with this step, as well as your IT department or

communications provider.

•A field trial of a complete working system using a MoNet at each end.

Again, the MoNet does not care about the type of IP network used between

the two ends, as long as there is a public internet connection available.

www.teletics.com !8

Differences between Modem Ports

The default factory config between the two modem ports are that the Modem

2 port is optimized for 2400 baud devices, such as Power Meters. Port 1 is set

for up to 33.6 kbps operation.

Both ports can be programmed to be optimized for 2400 baud, or full data

speed. Contact Teletics support for more information.

Call ProgressTones

The MoNet “off hook” tone is slightly higher pitch than a typical phone line.

When a call is progressing, you will hear “escalator tones”, in 4 levels.

Busy signals are identical to regular POTS phone lines.

LED Status Indications

The LEDs labeled Modem1 and Modem 2 on the MoNet will emit 4 flashes

when they are connected or connecting to another MoNet. When the Modem

port is idle, they will not be lit.

Hidden Reset Button

The Reset button on the MoNet is accessed through the front panel, by

pushing a non-conductive pointed object through a very small hole. The hole is

located between the two right front panel screws, and left of the Teletics logo.

Please do not press this reset button without first contacting Teletics technical

support.!

www.teletics.com !9

Basic Troubleshooting

Check to see if you can “ping” the MoNet. Type “ping” and the IP address

shown by Beaconsearch and hit enter. You should see replies, like below:

C !

If you cannot ping the MoNet, you should check if your network adapter in

your Computer is correctly set up. Type ipconfig and compare your output to

the one below. Generally, the first 9 digits of the IPv4 address needs to be the

same as the IP address shown by Beaconsearch:

If the first 9 digits are

different than those shown in Beaconsearch, then you need to set the network

on the computer to obtain the correct IP address automatically.

www.teletics.com !10

Tabla de contenidos

Manuales populares de Módem de otras marcas

Davicom

Davicom DM562AP Manual de usuario

EpiValley

EpiValley TATA indicom SXC-1080 Manual de usuario

Zte

Zte WiMAX Manual de usuario

Intelimax

Intelimax MA-2060 Manual de usuario

SMC Networks

SMC Networks D3CM1604V Manual de uso y cuidado

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manual de usuario

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manual de usuario

Samsung

Samsung AceLink SAM-335A Manual de usuario

Enfora

Enfora Enabler-G Guía de configuración rápida

iRZ

iRZ ATM2-232 Manual de usuario

Zhone

Zhone 6310 Manual de usuario

Paradyne

Paradyne Hotwire 7976 Manual de usuario

US Robotics

US Robotics 3453C Manual de usuario

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manual de usuario

Zte

Zte MF823 Manual de usuario

Four-Faith

Four-Faith F1403 Manual de usuario

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manual de usuario

Gemtek

Gemtek WiMAX WIXFBR-103 Manual de usuario