Telepro HEIM-48 Manual de usuario

Page : 1 / 14

INPUT MODULE

Installation & Operation Manual

Page : 2 / 14

----------------------------------------------------------------------------------NOTICE---------------------------------------------------------------------------------------

Read this manual thoroughly before using HEIM-48 INPUT Module and store in a safe place for reference.

Make sure that this manual is delivered to the final user.

The policiy of Telepro Enerji is one of continuous improvement .The right is reserved to alter the design on any structural

details of the products at any time without giving notice.

HEIM-48

HIGH EFFICIENCY INPUT MODULE

INPUT MODULE

Installation & Operation Manual

CPU VERSION 60.021

SOFTWARE (ISPOPERA™) VERSION 6102.024

SOFTWARE (ISPSIM™) VERSION 2.032.R21

Page : 3 / 14

INDEX

1. CONNECTIONS .............................................................................................................................. 4

1.1. Communıcatıon Termınal ................................................................................................................................................. 4

1.2. Power Supply.................................................................................................................................................................... 5

2. FRONT PANNEL DISPLAY FUNCTIONS.........................................................................................5

2.1. Device Status Dısplays...................................................................................................................................................... 6

2.2. Communıcatıon Dısplays.................................................................................................................................................. 6

2.3. Input Dısplays................................................................................................................................................................... 6

3. CONFIGURATION WITH ISPsimTM SOFTWARE TOOL ..................................................................7

3.1. Software Confıguratıon ................................................................................................................................................... 7

3.2. Devıce Port Confıguratıon (Enablıng Communıcatıon).................................................................................................. 7

3.3. Performıng Confıguratıon ............................................................................................................................................... 8

3.4. Sımulatıng Heım-48 ın the ISPSIM™ Tool........................................................................................................................ 9

3.5. Heım-48 FW Fıle Upload .................................................................................................................................................. 9

4. HEIM-48 TECHNICAL SPECIFICATIONS ......................................................................................10

5. HEIM-48 INPUT MODULE MODBUS REGISTER MAP .................................................................11

6.HEIM-48 WIRING SCHEME........................................................................................................... 12

7.REMOTE CENTER MONITORING&EVENT RECORDING SOLUTION WITH HEIM-48 & HEEP-3000

.......................................................................................................................................................... 13

8. APPENDIX-1 INSTALLATION & OPERATION MANUAL REVISION HISTORY............................. 13

Page : 4 / 14

1. CONNECTIONS

All connections to HEIM-48 are made from the terminals on the rear of the unit .For wiring, 12 AWG (2.5mm2) wires

should be used.Always turn the device input power OFF before all service,maintenance and wiring actions.

Below indicated terminals of the device are grouped and of quick disconnec plug in type. All pins of each terminal could

be connected or disconnected to/from the device in one action. Power Supply should be turned OFF before connecting/

disconnecting the terminals.

There are 8pcs of terminal group located on the rear panle of the unit.

1. For MODBUS communication, there is a terminal of 3pins.(RS485 Terminal)

2. For power supply, there is a terminal of 4pins.(Supply Terminal)

3. There are 6 pcs of terminals of 9 pins for INPUT terminals. (The terminals which signals from the field are

connected)

1.1. COMMUNICATION TERMINAL

HEIM-48 INPUT Module is providing communication feature via MODBUS-RTU protocol. It is possible to transfer field inputs

to the HEEP-3000 RTU or SCADA via RS485 physical medium with the help of Input Modul.It is easy to connect it from the

Administrative PC via RS485/232 converter. Corresponding port terminal connection should be done as seen below.

DATA (+)

DATA (-)

Page : 5 / 14

1.2.POWER SUPPLY

HEIM-48 Input Module is to be supplied with 110/220 VDC (optionaly 24/48VDC). Supply connection should be done as

seen below.

2. FRONT PANNEL DISPLAY FUNCTIONS

LED’s on the front panel of HEIM-48 are divided into 3 main groups.

1-Device Status LED Displays

2-Communication LED Displays

3-INPUT LED Displays

Page : 6 / 14

2.1. DEVİCE STATUS DISPLAYS

POWER ;

-Blinks If the device is powered and no configuration inside it,

-Solid If the device is powered and is configured,

-OFF If the device is not powred.

FAULT;

-ON If there is an internal fault in the device (Fault LED is ON If no configuration is

loaded inside it )

2.2. COMMUNICATION DISPLAYS

RS-485 LED’s; They indicate If the communication with the Operator PC or the system connected

(HEEP-3000 RTU, SCADA etc) is normal or not.

Rx; Data reception, Tx; Data transmission

2.3. INPUT DISPLAYS

With the help of 48 pcs of LEDs, it is easy to get information related with input signals to the HEIM-48 device from the

field.In case of any ON signal to a channel,LED corresponding to the channel is to be ON.If signal is OFF, the LED goes

OFF.

Inputs and LED Displays are divided into groups of 8pcs named as A,B,C,D,E,F.

Page : 7 / 14

3. CONFIGURATION WITH ISPSİMTM SOFTWARE TOOL

3.1. SOFTWARE CONFIGURATION

Telepro ISPSIM™ Software setup file is provided as standard via our web site (www.telepro.com.tr) with the user

code access for customers purchasing HEIM-48.It is easy to setup software by following instructions inside the file.After

that, when ISPSIM™ tool is run, the main window seen below appears.

3.2. DEVICE PORT CONFIGURATION (ENABLING COMMUNICATION)

•Please click the button “Port Settings” on the main window.

•If you connect with the help of the RS485/232 converter,please click -Auto Detection- button on the sub menu

occuring and connect with the device.

•After detecting the device, clicking “Connect Port”button will enable communication with the device and the

submenu is then closed.

Page : 8 / 14

3.3.PERFORMING CONFIGURATION

Please click the “Configuration” button on the main window of Telepro ISPSIM™ tool. Below submenu called “Heim48

configuration” will be opened.For the first start of the tool, it will give a warning saying “unable to load CONFIG file”

,since there is not any configuration inside.After configuration is done, as starting the tool, it will not give such warnings.

By clicking “Configuration”

button on the main window

of ISPSIM™ It is entered to

the Config menu.

Configuration menu could be divided into 3 main

group.

1. Group shows unchanging (constant) information

loaded inside the device.

2. Group; MODBUS ID , Detection Time , Clearance

Time data is set in this group.

3. Group;Upon any parameter change is done in the

group#2, these changes should be writen to the

device. Order of the operation is to be done as

follows “Write Config”>>”Write Eeprom” >>

“Restart”. After restarting the device,It can be

controlled If the data entered by the “Read

Config” button is written or not. Other buttons (

Beckup, Restore etc) are to be used to create

devices having same configuration or used to

keep the configuration of this device in the PC for

later use.

Page : 9 / 14

3.4. SIMULATING HEIM-48 IN THE ISPSIM™ TOOL

By clicking “simulator” button under the HEIM-48 menu in the ISPSIM™ tool, you can enter corresponding sub Menu.

As soon as marking the “Start Scan ” box with tick in the opening simulation window, software tool starts to simulate the

device. If any input from 48pcs Inputs is activated, It will turn to red colour.

One of the most important features of HEIM-48 Input modules is event recording capability. It can save 2.000pcs of events

in the internal buffer memory. You can view all the events recorded in the device by clicking the “Show Events” button in

the simulation menu.You can clear all the recorded events from the device memory by clicking the “Erase Events” button.

You can enable event records timestamps to be synchronized from your PC by cliking the “Sync Time ” button.

The “Lamp Test” button is used to test physically all of the LEDs of HEIM-48.

3.5. HEIM-48 FW FILE UPLOAD

In this section, we will explain how to upload HEIM-48 Firmware file provided inside the tool to the device. Our device will

have the latest version of firmware as loaded when first receiving. But in case of update needed later,uploading new

firmware version will be done from this menu .

Select the file with “hex” extension

sent by ourselves and click “AC”

button.

Page : 10 / 14

4. HEIM-48 TECHNICAL SPECIFICATIONS

* indicated features are optional

HEIM-48

24/48Vdc

110/220Vdc

Supply

Supply Voltage

18-72Vdc

65-300Vdc

Supply Power

10w

Inputs

Qty of Inputs

Type of Inputs

Optical isolated, Varistor Protected, Common return terminal transient filtered

Input Current/ Per channel

Max. 5 mA

Input Impedance (min)

20 kΩ

85 kΩ

Input threshold voltage

12V ± %20

65 V ± %20

Transient Voltage

C /

Common Mode: 1kV – Serial Mode: 2kV

Response time

Programmable 3-250ms

D f l

Release time

Programmable 3-250ms

f l

Connection type

Screwed, pluggable type terminals

Wire size

12 AWG (2.5 mm)

Communication

Communication Port

2 wires, RS485

Communication Protocol

Modbus RTU: 19200/8/n/1

Event Recorder

Event Recorder Yes

RTU Integration Yes

User Interface

Indication

LED

Case

Case type

1U 19” Rack type

Dimensions(WxLXD)

340x45x192mm (L profil dimensions :20x45x56mm, tichness:2.2mm)

Panel Mounting

Rack mount or Plug-in with panel mounting sleeve

Protection Class

IP20

Weight

2384.5 gr

Environmental Features

Operating temperature

-20 C – +60 C

Storage temperature

-25 C – +80 C

Humidity

0-95% RH

Package

Package type

Carton Box

Package dimensions(WxLxD)

496x245x83mm

Weight

2530 gr

Tabla de contenidos

Manuales populares de Sistema de E/S de otras marcas

WAGO

WAGO 750-344 Manual de usuario

Teknim

Teknim TWM-1887 Manual de instrucciones

Intelligent Appliance

Intelligent Appliance IA-2662-E Manual de usuario

BERGHOF

BERGHOF ECC DIO 16/16 Manual de instrucciones

Advantech

Advantech PCM-27J3AU Manual de instalación y operación

Festo

Festo CP-E08-M12-CL Manual de usuario

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manual de usuario

Hitachi

Hitachi HX-RIO3 Series Manual de usuario

NUUO

NUUO SCB-A08 Manual de usuario

M-system

M-system R3Y-RS8 Manual de usuario

jablotron

jablotron JB-110N Manual de usuario

Omron

Omron SYSMAC C200H Manual de usuario

DOLD

DOLD SAFEMASTER M Manual de usuario

ABB

ABB OPT-MF-001 Manual de usuario

Omron

Omron SYSMAC C2000H Manual de usuario

Helmholz

Helmholz TB20 Manual de usuario

ICP DAS USA

ICP DAS USA tM-AD2 Manual de usuario

Automationdirect.com

Automationdirect.com DL305 Manual de usuario