Teledyne Lecroy HDO4000A Manual de usuario

HDO4000A

High Denition Oscilloscopes

Getting Started Guide

700 Chestnut Ridge Road

Chestnut Ridge, NY 10977

1.800.5.LECROY •teledynelecroy.com

Unauthorized duplication of Teledyne LeCroy documentation materials other than for internal sales

and distribution purposes is strictly prohibited. However, clients are encouraged to duplicate and

distribute Teledyne LeCroy documentation for internal educational purposes.

HDO and Teledyne LeCroy are trademarks of Teledyne LeCroy, Inc. Windows is a registered

trademark of Microsoft Corporation. Other product or brand names are trademarks or requested

trademarks of their respective holders. Information in this publication supersedes all earlier

versions. Specifications are subject to change without notice.

927966-00 Rev A

April, 2017

HDO4000A

Getting Started Guide

Welcome

Thank you for buying a Teledyne LeCroy product. We’re certain you’ll be pleased with the detailed features unique to our instruments.

This Getting Started Guide is designed to cover important safety and installation information for your oscilloscope, along with some basic operating

procedures so you’re quickly working with waveforms.

Introduction

About the HDO4000A Oscilloscopes 2

Specifications 3

Materials List 3

General Safety Information 4

Support 6

Set Up

The Front of Your Oscilloscope 8

The Side of Your Oscilloscope 10

Connecting 11

The Back of Your Oscilloscope 12

Powering On/Off 13

Language Selection 13

Software Activation 14

Firmware Update 14

User Interface

Touch Screen Display 16

Changing the Display 18

Working With Traces 20

MAUI with OneTouch 21

Front Panel 26

Contents

Basics

Vertical 28

Horizontal (Timebase) 30

Triggers 31

Cursors 32

Measurements & Statistics 33

Math 34

Memories (Reference Waveforms) 35

Decode 36

WaveScan 37

Spectrum Analyzer 38

History Mode 39

Saving and Sharing Data 40

Software Options 41

Reference

Service 44

Certifications 45

Warranty 47

Intellectual Property 47

Windows License Agreement 47

HDO4000A

High Denition Oscilloscopes

INTRODUCTION

INTRODUCTION 2

About the HDO4000A Oscilloscopes

Combining Teledyne LeCroy’s HD4096 high-definition technology with

long memory, a compact form factor, 12.1” touch screen display, powerful

measurement and analysis tools, and mixed signal capability, the

HDO4000A scillosocopes are ideal for circuit validation, system debug and

waveform analysis. The powerful feature set provides analytical tools and

unique application packages to streamline the testing process.

HD4096

HD4096 high-definition technology consists of high sample rate 12-bit

ADCs, high signal-to-noise input amplifiers, and a low-noise system

architecture. This technology enables HDO™ oscilloscopes to capture and

display signals up to 1 GHz with a high sample rate and 16 times more

resolution than other oscilloscopes. Waveforms captured and displayed

on the HDO4000A with HD4096 technology are cleaner and crisper. Signal

details often lost in the noise are clearly visible and easy to distinguish,

and measurements can be performed with unmatched precision for

improved debug and analysis.

Enhanced Sample Rate

Enhanced sample rate technology automatically ensures optimal display

of acquired waveforms to the instruments’ full rated bandwidth.

MAUI with OneTouch

MAUI with OneTouch introduces a new paradigm for oscilloscope user

experience. Dramatically reduce setup time with revolutionary drag-

and-drop actions to copy and setup channels, math functions and

measurement parameters without lifting a finger. Use common gestures

like pinch, swipe and flick to intuitively interact with the oscilloscope.

Quickly enable a new trace or parameter using the “Add New” button, and

turn off any trace or parameter with a simple flick of the finger.

Mixed Signal Option

With embedded systems growing increasingly more complex,

powerful mixed signal debug capabilities are an essential part of

modern oscilloscopes. The 16 integrated digital channels and set of tools

designed to view, measure and analyze analog and digital signals enable

fast debugging of mixed signal designs. Flexible analog and digital

cross-pattern triggering across all 20 channels provides the ability to

quickly identify and isolate problems in an embedded system.

Comprehensive Analysis Tools

HDO4000A has one of the most comprehensive trigger, decode, math,

measurement and application toolsets available. Use trend plots to

enhance understanding of complex behaviors. WaveScan® Search

and Find allows you to search a single acquisition using more than 20

different criteria. History Mode lets you scroll back in time to view previous

acquisitions and isolate anomalies. Navigate waveforms in the frequency

domain with the Spectrum Analyzer option.

New LabNotebook Report Generator

LabNotebook stores the exact state of your oscilloscope in a composite

file format that can later be recalled and reviewed, annotated with custom

markup, or output to a preformatted report—right on the instrument.

Serial Bus Trigger and Decode

Isolate events using the serial bus trigger and view color-coded protocol

information on top of analog or digital waveforms. Timing and bus

measurements allow quick and easy characterization of a serial data

system.

INTRODUCTION 3

Specications

Detailed specifications are maintained in the Datasheet on the product

page at teledynelecroy.com.

Key Specications

Bandwidth 200 MHz–1 GHz

Resolution 12-bit

Analog Channels 4

Sample Rate up to 10 GS/s *

Memory up to 12.5 Mpts/ch

Digital Channels 16

Digital Sample Rate 1.25 GS/s

Min. Detectable Pulse Width 2 ns

Max. Input Frequency 250 MHz

* With Enhanced Sample Rate

Materials List

Check that you have all the parts listed here. Contact Teledyne

LeCroy immediately if any part is missing.

•1 oscilloscope

•4 passive probes

•1 AC power cord (rated for country)

•1 protective front cover

•1 Getting Started Guide

•1 Oscilloscope Security Certificate

•1 Oscilloscope Registration Card

•1 Calibration Document

HDO4000A-MS models include:

•1 digital leadset

•5 flying ground leads

•20 ground extenders

•22 XL microgrippers

INTRODUCTION 4

General Safety Information

This section contains instructions that must be observed to keep the

instrument operating in a correct and safe condition. You are required to

follow generally accepted safety procedures in addition to the precautions

specified in this section. The overall safety of any system incorporating

this instrument is the responsibility of the assembler of the system.

Symbols

These symbols appear on the instrument’s front or rear panels and in its

documentation to alert you to important safety considerations.

CAUTION of damage to instrument, or WARNING of hazard to

health. Attend to the accompanying information to protect against

personal injury or damage. Do not proceed until conditions are fully

understood and met.

WARNING. Risk of electric shock.

Measurement ground connection.

Alternating Current.

On/Standby power.

Precautions

• Use proper power cord. Use only the power cord shipped with this

instrument and certified for the country of use.

• Maintain ground. This product is grounded through the power cord

grounding conductor. To avoid electric shock, connect only to a

grounded mating outlet.

• Connect and disconnect properly. Do not connect/disconnect probes

or test leads while they are connected to a voltage source.

• Observe all terminal ratings. Do not apply a voltage to any input

(C1-C4, EXT, AUX, or D0-D15) that exceeds the maximum rating of that

input. Refer to the body of the oscilloscope for maximum input ratings.

• Use only within operational environment listed. Do not use in wet or

explosive atmospheres.

• Use indoors only.

• Keep product surfaces clean and dry.

• Exercise care when lifting and carrying. Always use the built-in

carrying handle.

• Do not block the cooling vents. Leave a minimum six-inch gap

between the instrument and the nearest object. Keep the underside

clear of papers and other objects.

• Do not remove the covers or inside parts. Refer all maintenance to

qualified service personnel.

• Do not operate with suspected failures. Inspect all parts regularly

and do not use the product if any part is damaged. Cease operation

immediately and sequester the instrument from inadvertent use.

INTRODUCTION 5

Operational Environment

Temperature: 5° to 40° C

Humidity: Maximum relative humidity 90% for temperatures up to

31° C decreasing linearly to 50% relative humidity at 40° C

Altitudes: up to 3,000 m (at < 30° C)

Power and Grounding

The instrument operates from a single-phase, 100 to 240 Vrms (± 10%)

AC power source at 50/60/400 Hz (± 10%). The instrument automatically

adapts to the line voltage. Manual voltage selection is not required.

The AC inlet ground is connected directly to the frame of the instrument.

For adequate protection against electric shock, connect to a mating outlet

with a safety ground contact.

WARNING. Interrupting the protective conductor inside or outside the

oscilloscope, or disconnecting the safety ground terminal, creates a

hazardous situation. Intentional interruption is prohibited.

Maximum power consumption with all accessories installed (e.g., active

probes, USB peripherals, digital leadset) is 300 W (300 VA)

Power consumption in Standby mode is 4 W.

Cleaning

Clean only the exterior of the oscilloscope using a damp, soft cloth. Do

not use harsh chemicals or abrasive elements. Under no circumstances

submerge the instrument or allow moisture to penetrate it. Avoid electric

shock by unplugging the power cord from the AC outlet before cleaning.

CAUTION. Do not attempt to clean internal parts.

Calibration

The HDO4000A is calibrated at the factory prior to being shipped. This

calibration is run at 23° C (± 2° C) and is valid for temperatures ± 5° C of

the original calibration temperature. Within this temperature range, the

HDO4000A will meet all specifications.

Warm up the HDO4000A for at least 20 minutes prior to use. During the

warm-up period, the oscilloscope will automatically initiate calibrations to

ensure that it is always calibrated.

When the oscilloscope is used outside of the factory calibration

temperature range, a user-invoked temperature dependent calibration is

recommended. There are two options for this calibration: Calibrate All or

Calibrate Current Setting.

Calibrate All - All possible combinations of vertical and horizontal settings

are calibrated at the current temperature. This calibration is valid for the

current temperature ± 5° C and takes about 50 minutes.

Calibrate Current Setting - The oscilloscope is calibrated at the current

vertical and horizontal settings. This calibration is valid for these settings

at the current temperature ± 5° C and takes under 30 seconds.

It is also recommended that the HDO4000A be calibrated when it has

been more than 1 month since the previous calibration.

CAUTION. Remove all inputs from the oscilloscope prior to

calibration.

INTRODUCTION 6

Support

Online Documentation

Online Help is available by selecting Support > Dynamic Help from the

oscilloscope display menu bar. You can also select Support > OneTouch

Help for a demonstration of MAUI with OneTouch.

Teledyne LeCroy publishes a free Technical Library on its website.

Manuals, tutorials, application notes, white papers, and videos are

available to help you get the most out of your Teledyne LeCroy products.

The HDO4000A Oscilloscopes Operator’s Manual can be downloaded from

teledynelecroy.com/support/techlib under Manuals > Oscilloscopes. This

.PDF document contains more extensive procedures for operating your

oscilloscope than are found here.

The Datasheet published on the product page contains the detailed

product specifications.

Technical Support

Registered users can contact their local Teledyne LeCroy service center to

make Technical Support requests by phone or email. For a complete list

of offices, visit teledynelecroy.com/support/contact.

You can also submit Technical Support requests via the website at

teledynelecroy.com/support/techhelp.

Otros manuales para HDO4000A

Tabla de contenidos

Otros manuales de Equipo de prueba de Teledyne Lecroy

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3000z Manual de usuario

Teledyne Lecroy

Teledyne Lecroy MS-500 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy frontline TLF 3000 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy HDO6000 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy HDO4000 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 10 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveMaster 8 Zi-B Manual de usuario

Teledyne Lecroy

Teledyne Lecroy LabMaster 10 Zi-A Manual de usuario

Teledyne Lecroy

Teledyne Lecroy Everywhereyoulook HDO6000B Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3000 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy frontline TLF 3000 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy PP009-1 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy Summit Gen4 Test Platform Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveRunner/MDA 8000HD Series Manual de usuario

Teledyne Lecroy

Teledyne Lecroy 780 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy FrontLine Harmony Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 4034HD Manual de usuario

Teledyne Lecroy

Teledyne Lecroy PP066 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy Everywhereyoulook HDO6000B Manual de usuario

Teledyne Lecroy

Teledyne Lecroy RP2060 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy MS-500 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveJet Touch Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3024Z Manual de usuario

Teledyne Lecroy

Teledyne Lecroy PP006D Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario