Teledyne Analytical Instruments INSTA TRANS-XD Manual de usuario
Teledyne Analytical Instruments i
OPERATING INSTRUCTIONS FOR
INSTA TRANS-XD
Trace and Percent Oxygen Digital
Transmitter
DANGER
Toxic gases and or flammable liquids may be present in this monitoring system.
Personal protective equipment may be required when servicing this instrument.
Only authorized personnel should conduct maintenance and/or servicing.
Before conducting any maintenance or servicing, consult with authorized
supervisor/manager.
P/N M82620
7-19-18
Insta Trans-XD
Teledyne Analytical Instruments ii
Copyright © 2017 Teledyne Analytical Instruments
All Rights Reserved. No part of this manual may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any other language or computer language in
whole or in part, in any form or by any means, whether it be electronic, mechanical,
magnetic, optical, manual, or otherwise, without the prior written consent of Teledyne
Analytical Instruments, 16830 Chestnut Street, City of Industry, CA 91748.
Warranty
This equipment is sold subject to the mutual agreement that it is warranted by us free from
defects of material and of construction, and that our liability shall be limited to replacing or
repairing at our factory (without charge, except for transportation), or at customer plant at
our option, any material or construction in which defects become apparent within one year
from the date of shipment, except in cases where quotations or acknowledgements provide
for a shorter period. Components manufactured by others bear the warranty of their
manufacturer. This warranty does not cover defects caused by wear, accident, misuse,
neglect or repairs other than those performed by Teledyne or an authorized service center.
We assume no liability for direct or indirect damages of any kind and the purchaser by the
acceptance of the equipment will assume all liability for any damage which may result from
its use or misuse.
We reserve the right to employ any suitable material in the manufacture of our apparatus,
and to make any alterations in the dimensions, shape or weight of any parts, in so far as
such alterations do not adversely affect our warranty.
Important Notice
This instrument provides measurement readings to its user, and serves as a tool by which
valuable data can be gathered. The information provided by the instrument may assist the user
in eliminating potential hazards caused by his process; however, it is essential that all
personnel involved in the use of the instrument or its interface, with the process being
measured, be properly trained in the process itself, as well as all instrumentation related to it.
The safety of personnel is ultimately the responsibility of those who control process
conditions. While this instrument may be able to provide early warning of imminent
danger, it has no control over process conditions, and it can be misused. In particular, any
alarm or control systems installed must be tested and understood, both as to how they
operate and as to how they can be defeated. Any safeguards required such as locks, labels,
or redundancy, must be provided by the user or specifically requested of Teledyne at the
time the order is placed.
Therefore, the purchaser must be aware of the hazardous process conditions. The purchaser
is responsible for the training of personnel, for providing hazard warning methods and
instrumentation per the appropriate standards, and for ensuring that hazard warning devices
and instrumentation are maintained and operated properly.
Teledyne Analytical Instruments, the manufacturer of this instrument, cannot accept
responsibility for conditions beyond its knowledge and control. No statement expressed or
implied by this document or any information disseminated by the manufacturer or its
agents, is to be construed as a warranty of adequate safety control under the user’s process
conditions.
Oxygen Transmitter
Teledyne Analytical Instruments iii
Specific Model Information
The instrument for which this manual was supplied may
incorporate one or more options not supplied in the standard instrument.
Commonly available options are listed below, with check boxes. Any
that are incorporated in the instrument for which this manual is supplied
are indicated by a check mark in the box.
Instrument Serial Number:_______________________
Cell Class:
B1
B2C
A2C
A5
L2C
Insta-Trace
Other
Insta Trans-XD Transmitter Model:
Insta Trans-XD
Teledyne Analytical Instruments iv
Safety Messages
Your safety and the safety of others are very important. We have
provided many important safety messages in this manual. Please read
these messages carefully.
A safety message alerts you to potential hazards that could hurt you
or others. Each safety message is associated with a safety alert symbol.
These symbols are found in the manual and inside the instrument. The
definition of these symbols is described below:
GENERAL WARNING/CAUTION: Refer to the instructions for
details on the specific danger. These cautions warn
of specific procedures which if not followed could
cause bodily Injury and/or damage the instrument.
CAUTION: HOT SURFACE WARNING:This warning is specific to
heated components within the instrument. Failure to
heed the warning could result in serious burns to
skin and underlying tissue.
Technician Symbol:All operations marked with this symbol are to be
performed by qualified maintenance personnel only.
NOTE: Additional information and comments regarding a
specific component or procedure are highlighted in
the form of a note.
No
Symbol
Oxygen Transmitter
Teledyne Analytical Instruments v
CAUTION: THE ANALYZER SHOULD ONLY BE USED ONLY
FOR THE PURPOSE AND IN THE MANNER
DESCRIBED IN THIS MANUAL.
IF YOU USE THE ANALYZER IN A MANNER OTHER
THAN THAT FOR WHICH IT WAS INTENDED,
UNPREDICTABLE BEHAVIOR COULD RESULT
POSSIBLY ACCOMPANIED WITH HAZARDOUS
CONSEQUENCES.
This manual provides information designed to guide you through
the installation, calibration operation and maintenance of your new
analyzer. Please read this manual and keep it available.
Occasionally, some instruments are customized for a particular
application or features and/or options added per customer requests.
Please check the front of this manual for any additional information in
the form of an Addendum which discusses specific information,
procedures, cautions and warnings that may be peculiar to your
instrument.
Manuals do get lost. Additional manuals can be obtained from
Teledyne at the address given in the Appendix. Some of our manuals are
available in electronic form via the internet. Please visit our website at:
www.teledyne-ai.com.
Insta Trans-XD
Teledyne Analytical Instruments vi
Safety Information
WARNING: Substitution of components may impair intrinsic
safety.
WARNING: To prevent ignition of flammable or combustible
atmospheres, read, understand and adhere to the
manufacturer’s live maintenance procedures.
WARNING: Potential electrostatic charging hazard.
The enclosure contains plastic. To prevent the risk of
electrostatic sparking the plastic surface should be
cleaned only with a damp cloth.
WARNING: The apparatus enclosure contains aluminum and is
considered to constitute a potential risk of ignition by
impact or friction. Care must be taken into account
during installation and use to prevent impact or
friction.
Oxygen Transmitter
Teledyne Analytical Instruments vii
DANGER
COMBUSTIBLE GAS USAGE
WARNING
This is a general purpose instrument designed for use in a
nonhazardous area. It is the customer's responsibility to
ensure safety especially when combustible gases are being
analyzed since the potential of gas leaks always exist.
The customer should ensure that the principle of operating
of this equipment is well understood by the user. Misuse of
this product in any manner, tampering with its components,
or unauthorized substitution of any component may
adversely affect the safety of this instrument.
Since the use of this instrument is beyond the control of
Teledyne, no responsibility by Teledyne, its affiliates, and
agents for damage or injury from misuse or neglect of this
equipment is implied or assumed.
Insta Trans-XD
Teledyne Analytical Instruments viii
Certification/Approvals and Special
Instructions
Factory Mutual (FM)
TAI Model Insta Trans-XD IS Ex ia
CL I, Div 1, Gp ABCD T4 @ Ta= 0 oC to 50 oC
TAI Model Insta Trans-XD Nonincendive for
CL I, Div 2, Gp ABCD T4 @ Ta= 0 oC to 50 oC
Refer to control drawing D92719
Oxygen Transmitter
Teledyne Analytical Instruments ix
ATEX Certification and Special Conditions for Safe
Use
Symbol X:
Warning! This instrument is not designed for use with
oxygen enriched gases, i.e. gases with an oxygen content
greater than 21%.
Warning! This instrument uses an aluminum case. Protect
against impact or friction to minimize ignition risks. Clean
with a damp cloth to prevent electrostatic discharge, and
must not be installed where it could be subjected to high
airflow dust laden atmospheres.
The electrical connections are not isolated from ground. This
must be taken into account during installation and use.
Tabla de contenidos
Otros manuales de Transmisor de Teledyne Analytical Instruments
