Teledelta MPR Series Manual de usuario

MPR Receiver Quick Start Guide vr1.5

MPR Receiver –Overview

TeleDelta is proudly an Australian owned company. s:\teledelta\mpr series\mpr receiver quick start guide vr1.5.docx

www.teledelta.com Page 1 of 17

Quick Start

Operation and Installation Guide

MPR Series

Multi-Purpose Receiver

MPR Receiver Quick Start Guide vr1.5

MPR Receiver –Overview

TeleDelta is proudly an Australian owned company. s:\teledelta\mpr series\mpr receiver quick start guide vr1.5.docx

www.teledelta.com Page 2 of 17

Contents

Revision ..................................................................................................................................................2

Quick Start - Getting Started Guide ........................................................................................................3

Navigation Keys Operation Instruction................................................................................................4

Confirm or Change the Default IP Address.........................................................................................4

Configuration through WEB Management..............................................................................................5

First Time Log On................................................................................................................................5

Main Interface Introduction..................................................................................................................6

Appendix 1 - Setup Example Audio Only Service (TSIMA)....................................................................7

Setting the Receiver RF...................................................................................................................7

Status page......................................................................................................................................8

Check the CA / CAM settings ..........................................................................................................9

Select Program Decryption............................................................................................................10

Select Program ..............................................................................................................................11

Appendix 2 - Setup Example VAST TV service (ABC24).....................................................................12

Setting the Receiver RF (single tuner models)..............................................................................12

Status page....................................................................................................................................13

Check the CA / CAM settings ........................................................................................................14

Select Program Decryption,...........................................................................................................15

Select Program ..............................................................................................................................16

Revision

File

MPR Receiver Quick Start Guide Vr1.5.Docx

MPR Receiver Quick Start Guide vr1.5

MPR Receiver –Overview

mpr receiver quick start guide vr1.5.docx Page 3 of 17

Quick Start - Getting Started Guide

Switch on the equipment through the back power switch, the unit is powered up and start the

initialization.

After power on the LCD screen is lights up, and displays information as follows

The initialization takes about 30 seconds to complete. The input/output indicator LEDs turn red after

the first successful initialization because the signal is not locked. After configuration of the device, the

corresponding LEDs will show the correct status.

MPR Receiver Quick Start Guide vr1.5

MPR Receiver –Overview

mpr receiver quick start guide vr1.5.docx Page 4 of 17

Navigation Keys Operation Instruction

Use the 6 navigation keys on front panel: Up / Down / Left / Right / Menu / Ok to enter the

configuration menu.

Enter “Menu”:

Press “OK” button to enter main menu.

Exit Menu/Back for parent Menu

Upon completion of configuration settings, press “OK” button until you go back

to the Parent Menu.

Enter Sub-Menu

Press OK button to enter main menu.

Select a sub-menu by pressing UP and DOWN button.

Press MENU button on the selected sub-menu.

To change a parameter

Step 1: Enter main menu by pressing OK button.

Step 2: Scroll sub-menu by pressing UP and DOWN button, and press MENU button to

change the selected sub-menu.

Step 3: To change parameter settings, press RIGHT and LEFT button to move the cursor in

which change must be made.

Press UP button and DOWN to input / select an appropriate setting, then press MENU button

to save.

Confirm or Change the Default IP Address

Note DHCP is not provided (despite the menu selection)

1. check out the IP on the LCD screen.

2. use the button on the front panel to change the IP, gateway and subnet mask The gateway

should be the same as the management PC’s. The subnet mask should be the same as the

management PC’s s. The IP and the server’s IP should be in the same subnet section.

3. reboot the device to take effect.

4. ping the new IP to check whether the device can connect to the management PC.

MPR Receiver Quick Start Guide vr1.5

MPR Receiver –Overview

mpr receiver quick start guide vr1.5.docx Page 5 of 17

Configuration through WEB Management

First Time Log On

Configuration is best performed via a web browser.

Start a browser and browse to the set ip address of the unit. The log on page will appear

The default User Name and Password are “admin”.

If you are unable to connect check for possible reasons for unsuccessful log on:

IP address/ network mask/gateway don’t match with the management PC’s

User name/password is wrong –check the caps lock - lower case is required.

The device is connected to the wrong interface

MPR Receiver Quick Start Guide vr1.5

MPR Receiver –Overview

mpr receiver quick start guide vr1.5.docx Page 6 of 17

Main Interface Introduction

After successful log on, the following screen will display:

The main interface can be divided into two areas.

1. Menu: each screen shares same 6 tabs including “Status”, “Inputs”, “Outputs”, “CA”, “System”

and “Reset”.

2. Settings: Configuration data for each function

Settings

MPR Receiver Quick Start Guide vr1.5

Appendix 1: Setup Example –Audio Only Service - TSIMA

mpr receiver quick start guide vr1.5.docx Page 7 of 17

Appendix 1 - Setup Example Audio Only Service (TSIMA)

Let’s assume that you have a dish and LNB connected and pointed correctly and you are going after

the Optus VAST TSIMA service

Setting the Receiver RF

“Zoomed In” version for TSIMA as At Oct 2013

Note: Adjust your LNB L.O. Frequency to suit (if required)

Select

Optus C1/D3

156E, use

13V for

standard

Vertical

MPR Receiver Quick Start Guide vr1.5

Appendix 1: Setup Example –Audio Only Service - TSIMA

mpr receiver quick start guide vr1.5.docx Page 8 of 17

Status page

If all these settings are correct the receiver will lock and the Status page will look similar to this:

- Check for a lock

If you have a green lock as shown here and on the front panel then continue the setup

Note –Green

for locked

signal

MPR Receiver Quick Start Guide vr1.5

Appendix 1: Setup Example –Audio Only Service - TSIMA

mpr receiver quick start guide vr1.5.docx Page 9 of 17

Check the CA / CAM settings

They should suit the speed of the CAM card you are using:

Now check the

CA settings

MPR Receiver Quick Start Guide vr1.5

Appendix 1: Setup Example –Audio Only Service - TSIMA

mpr receiver quick start guide vr1.5.docx Page 10 of 17

Select Program Decryption

All the programs are shown and from here you can route them to the CA/CI/CAM slot for the channels

that you want to de-scramble

Note: - Only have one service routed to the CI Slot if you have a single service card

Now check / set

the CA settings

Select

Tabla de contenidos

Manuales populares de Receptor de otras marcas

Garmin

Garmin GA 23 Manual de usuario

Aiphone

Aiphone PS-12F Manual de usuario

IMES

IMES TCS-01CA-PMI Manual de usuario

BWI Eagle

BWI Eagle AIR-EAGLE SR Manual

AMIMON

AMIMON AMN12310 WHDI Manual de usuario

Dual

Dual DMCPA79BT Instrucciones de funcionamiento

Sound Associates

Sound Associates SA652P Manual de usuario

Sherwood

Sherwood NewCastle R-772 Manual de usuario

Audio

Audio A10-RX Series Manual de usuario

AllSee

AllSee PushShare PSRV1.1 Manual de usuario

DEMAG

DEMAG DRC-DR D2 Manual de usuario

Teleco

Teleco TVRCL868A02 Manual de usuario

Bosch

Bosch RF3222E Manual de usuario

Kramer

Kramer 631R Manual de usuario

Xpress

Xpress xmc10 Manual de usuario

JVC

JVC KD-MR1BTS Manual de usuario

Omega Engineering

Omega Engineering UWTC-REC3 Manual de usuario

e-survey

e-survey E300 Pro Manual de usuario