Tektronix RSA306B Manual

RSA306B and RSA306B-SMA

Real-Time Spectrum Analyzers

Installation and Safety

ZZZ

Instructions

*P071348301*

071-3483-01

RSA306B and RSA306B-SMA

Real-Time SpectrumAnalyzers

Installation and Safety

ZZZ

Instructions

Click the following link to protect your product.

►www.tek.com/register

www.tek.com

071-3483-01

Warranty

Tektronix warrants that this product will be free from defects in materials and

workmanship for a period of three (3) years from the date of shipment. If any such product

proves defective during this warranty period, Tektronix, at its option, either will repair

the defective product without charge for parts and labor, or will provide a replacement

in exchange for the defective product. Parts, modules and replacement products used by

Tektronix for warranty work may be new or reconditioned to like new performance. All

replaced parts, modules and products become the property of Tektronix.

In order to obtain service under this warranty, Customer must notify Tektronix of the

defect before the expiration of the warranty period and make suitable arrangements for the

performance of service. Customer shall be responsible for packaging and shipping the

defective product to the service center designated by Tektronix, with shipping charges

prepaid. Tektronix shall pay for the return of the product to Customer if the shipment is to

a location within the country in which the Tektronix service center is located. Customer

shall be responsible for paying all shipping charges, duties, taxes, and any other charges

for products returned to any other locations.

This warranty shall not apply to any defect, failure or damage caused by improper use or

improper or inadequate maintenance and care. Tektronix shall not be obligated to furnish

service under this warranty a) to repair damage resulting from attempts by personnel other

than Tektronix representatives to install, repair or service the product; b) to repair damage

resulting from improper use or connection to incompatible equipment; c) to repair any

damage or malfunction caused by the use of non-Tektronix supplies; or d) to service a

product that has been modiﬁed or integrated with other products when the effect of such

modiﬁcation or integration increases the time or difﬁculty of servicing the product.

THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THE

PRODUCT IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED.

TEKTRONIX AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TEKTRONIX'

RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE

SOLE AND EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR

BREACH OF THIS WARRANTY. TEKTRONIX AND ITS VENDORS WILL NOT BE

LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR HAS

ADV

ANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

[W4 – 15AUG04]

Table of Contents

Important safety information ........................................... ii

General safety summary ........................................... ii

Terms in this manual............................................... iv

Symbols and terms on the product................................ iv

Preface..................................................................... v

Documentation ...................................................... v

Introduction............................................................... 1

Standard accessories . .. .. .. .. ......... ...... .. .. .. ............... .. . 2

Optional accessories . .. ......... .. .... .. .. .. ............... .. .. .. ... 2

Service options ...................................................... 3

PC requirements..................................................... 5

Installation ................................................................ 7

Load the SignalVu-PC and TekVISA software ................... 7

Load the API and USB driver software ........................... 8

Make the connections............................................... 8

Conﬁrm operation................................................. 10

Front-panel connections .......................................... 11

Compliance information ............................................... 13

EMC compliance.................................................. 13

Safety compliance................................................. 15

Environmental considerations.................................... 16

RSA306B and RSA306B-SMA Installation and Safety Instructions i

Important safety information

This manual contains information and warnings that must be followed

by the user for safe operation and to keep the product in a safe condition.

General safety summary

Use the product only as speciﬁed. Review the following safety

precautions to avoid injury and prevent damage to this product or any

products connected to it. Carefully read all instructions. Retain these

instructions for future reference.

Comply with local and national safety codes.

For correct and safe operation of the product, it is essential that you

follow generally accepted safety procedures in addition to the safety

precautions speciﬁed in this manual.

The product is designed to be used by trained personnel only.

Only qualiﬁed personnel who are aware of the hazards involved should

remove the cover for repair, maintenance, or adjustment.

This product is not intended for detection of hazardous voltages.

While using this product, you may need to access other parts of a larger

system. Read the safety sections of the other component manuals for

warnings and cautions related to operating the system.

When incorporating this equipment into a system, the safety of that

system is the responsibility of the assembler of the system.

To avoid ﬁre or personal injury

Connect and disconnect properly. Do not connect or disconnect probes

or test leads while they are connected to a voltage source.

Observe all terminal ratings. To avoid ﬁre or shock hazard, observe all

ratings and markings on the product. Consult the product manual for

further ratings information before making connections to the product.

Do not apply a potential to any terminal, including the common

terminal, that exceeds the maximum rating of that terminal.

ii RSA306B and RSA306B-SMA Installation and Safety Instructions

Important safety information

The measuring terminals on this product are not rated for connection to

mains or Category II, III, or IV circuits.

Do not operate without covers. Do not operate this product with covers

or panels removed, or with the case open.

Avoid exposed circuitry. Do not touch exposed connections and

components when power is present.

Do not operate with suspected failures. If you suspect that there is damage

to this product, have it inspected by qualiﬁed service personnel.

Disable the product if it is damaged. Do not use the product if it is

damaged or operates incorrectly. If in doubt about safety of the product,

turn it off and disconnect the power. Clearly mark the product to prevent

its further operation.

Examine the exterior of the product before you use it. Look for cracks

or missing pieces.

Use only speciﬁed replacement parts.

Do not operate in wet/damp conditions. Be aware that condensation may

occurifaunitismovedfromacold to a warm environment.

Do not operate in an explosive atmosphere.

Keep product surfaces clean and dry. Remove the input signals before

you clean the product.

Provide proper ventilation. Refer to the installation instructions in the

manual for details on installing the product so it has proper ventilation.

Provide a safe working environment. Avoid improper or prolonged use of

keyboards, pointers, and button pads. Improper or prolonged keyboard

or pointer use may result in serious injury.

Be sure your work area meets applicable ergonomic standards. Consult

with an ergonomics professional to avoid stress injuries.

Use only the Tektronix rackmount hardware speciﬁed for this product.

RSA306B and RSA306B-SMA Installation and Safety Instructions iii

Important safety information

Terms in this manual

These terms may appear in this manual:

WARNING. Warning statements identify conditions or practices that could

result in injury or loss of life.

CAUTION. Caution statements identify conditions or practices that could

result in damage to this product or other property.

Symbols and terms on the product

These terms may appear on the product:

DANGER indicates an injury hazard immediately accessible as you

read the marking.

WARNING indicates an injury hazard not immediately accessible

as you read the marking.

CAUTION indicates a hazard to property including the product.

iv RSA306B and RSA306B-SMA Installation and Safety Instructions

Preface

This document contains the following information about the RSA306B

and RSA306B-SMA Real-Time Spectrum Analyzers.

A list of standard and optional accessories

Installation procedures

Functional check procedure

EMC (electromagnetic compliance), safety, and environmental

standards with which the instrument complies

Documentation

The following table lists some of the documentation that is available for

this product and shows where you can ﬁnd it: in a printed manual, on

the product ﬂash drive, or on the Tektronix Web site at www.tek.com.

Table i: Product documentation

Item Purpose Location

Installation

and Safety

Instructions

(this manual)

Provides software and hardware

installation instructions and the

associated safety warnings.

Printed manual and also

available in electronic

format on the product

ﬂash drive and at

www.tek.com/manuals

Performance

Veriﬁcation

Technical

Reference

Performance veriﬁcation procedures

for checking instrument performance

Available at

www.tek.com/manuals

SignalVu-PC

Help

Using the application and interpreting

the measurement results

Help ﬁles are located in

the application

RSA306B API

Programmer

manual

Details on commands used to control

the instrument through an API

Available at

www.tek.com/manuals

SignalVu-PC

Programmer

manual

Details on commands used with the

SignalVu-PC application

Available at

www.tek.com/manuals

RSA306B and RSA306B-SMA Installation and Safety Instructions v

Preface

vi RSA306B and RSA306B-SMA Installation and Safety Instructions

Otros manuales para RSA306B

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Tektronix

Tektronix

Tektronix RSA306B Manual de uso y cuidado

Tektronix

Tektronix Type 130 Manual de usuario

Tektronix

Tektronix AA 501 Manual de usuario

Tektronix

Tektronix DTM500 Series Manual de uso y cuidado

Tektronix

Tektronix RSA3408B Manual de usuario

Tektronix

Tektronix BERTScope BSA85C Manual

Tektronix

Tektronix CSA7404 Manual de usuario

Tektronix

Tektronix 1200C01 Manual de usuario

Tektronix

Tektronix TMS 165 Manual de usuario

Tektronix

Tektronix TLA6000 Series Manual de usuario

Tektronix

Tektronix 321 A Manual de usuario

Tektronix

Tektronix A622 Manual de usuario

Tektronix

Tektronix P6106A Manual de usuario

Tektronix

Tektronix 2715 Manual de usuario

Tektronix

Tektronix P3410 Manual de usuario

Tektronix

Tektronix RSA5100B series Manual de uso y cuidado

Tektronix

Tektronix PA1000 Manual de usuario

Tektronix

Tektronix 318 Manual de usuario

Tektronix

Tektronix P6434 Manual de usuario

Tektronix

Tektronix TTR500 series Manual de operación y mantenimiento

Tektronix

Tektronix SD-14 Manual de usuario

Tektronix

Tektronix 208 Manual de usuario

Tektronix

Tektronix P6021 Manual de usuario

Tektronix

Tektronix TDSUSB2 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario