Tektronix RSA2203A Manual de usuario

User Manual

RSA2203A & RSA2208A

3 GHz & 8 GHz Real-Time Spectrum Analyzers

071-1334-04

This document applies to firmware version 3.20

and above.

www.tektronix.com

suppliers, and are protected by national copyright laws and international treaty provisions.

Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supercedes

that in all previously published material. Specifications and price change privileges reserved.

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

Contacting Tektronix

Tektronix, Inc.

14200 SW Karl Braun Drive

P.O. Box 500

Beaverton, OR 97077

USA

For product information, sales, service, and technical support:

HIn North America, call 1-800-833-9200.

HWorldwide, visit www.tektronix.com to find contacts in your area.

End User License Agreement for Microsoft Software

You have acquired a device (“DEVICE”) that includes software licensed by Tektronix Japan, Ltd. (“TJ”) from Microsoft

Licensing Inc. or its affiliates (“MS”). Those installed software products of MS origin, as well as associated media, printed

materials, and “online” or electronic documentation (“SOFTWARE”) are protected by international intellectual property

IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT (“EULA”), DO NOT USE THE DEVICE OR

COPY THE SOFTWARE. INSTEAD, PROMPTLY CONTACT TJ FOR INSTRUCTIONS ON RETURN OF THE

UNUSED DEVICE(S) FOR A REFUND. ANY USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO

USE ON THE DEVICE, WILL CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF

ANY PREVIOUS CONSENT).

GRANT OF SOFTWARE LICENSE. This EULA grants you the following license:

You may use the SOFTWARE only on the DEVICE.

NOT FAULT TOLERANT.

THE SOFTWARE IS NOT FAULT TOLERANT. TJ HAS INDEPENDENTLY DETERMINED HOW TO USE THE

SOFTWARE IN THE DEVICE, AND MS HAS RELIED UPON TJ TO CONDUCT SUFFICIENT TESTING TO

DETERMINE THAT THE SOFTWARE IS SUITABLE FOR SUCH USE.

NO WARRANTIES FOR THE SOFTWARE.

THE SOFTWARE IS PROVIDED “AS IS” AND WITH ALL FAULTS. THE ENTIRE RISK AS TO

SATISFACTORY QUALITY, PERFORMANCE, ACCURACY, AND EFFORT (INCLUDING LACK OF

NEGLIGENCE) IS WITH YOU. ALSO, THERE IS NO WARRANTY AGAINST INTERFERENCE WITH

YOUR ENJOYMENT OF THE SOFTWARE OR AGAINST INFRINGEMENT. IF YOU HAVE RECEIVED

ANY WARRANTIES REGARDING THE DEVICE OR THE SOFTWARE, THOSE WARRANTIES DO NOT

ORIGINATE FROM, AND ARE NOT BINDING ON, MS.

N O T E O N J AVA S UP P O RT.

The SOFTWARE may contain support for programs written in Java. Java technology is not fault tolerant and is not

designed, manufactured, or intended for use or resale as online control equipment in hazardous environments

requiring fail--safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication

systems, air traffic control, direct life support machines, or weapons systems, in which the failure of Java technology

could lead directly to death, personal injury, or severe physical or environmental damage. Sun Microsystems, Inc. has

contractually obligated MS to make this disclaimer.

NO LIABILITY FOR CERTAIN DAMAGES.

EXCEPT AS PROHIBITED BY LAW, MS SHALL HAVE NO LIABILITY FOR ANY INDIRECT, SPECIAL,

CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM OR IN CONNECTION WITH THE

USE OR PERFORMANCE OF THE SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF ANY

REMEDY FAILS OF ITS ESSENTIAL PURPOSE. IN NO EVENT SHALL MS BE LIABLE FOR ANY

AMOUNT IN EXCESS OF U.S. TWO HUNDRED FIFTY DOLLARS (U.S.$250.00).

LIMITATIONS ON REVERSE ENGINEERING, DECOMPILATION, AND DISASSEMBLY.

You may not reverse engineer, decompile, or disassemble the SOFTWARE, except and only to the extent that such

activity is expressly permitted by applicable law notwithstanding this limitation.

SOFTWARE TRANSFER ALLOWED BUT WITH RESTRICTIONS.

You may permanently transfer rights under this EULA only as part of a permanent sale or transfer of the Device, and

only if the recipient agrees to this EULA. If the SOFTWARE is an upgrade, any transfer must also include all prior

versions of the SOFTWARE.

EXPORT RESTRICTIONS.

You acknowledge that SOFTWARE is of US--origin. You agree to comply with all applicable international and

national laws that apply to the SOFTWARE, including the U.S. Export Administration Regulations, as well as

end--user, end--use and country destination restrictions issued by U.S. and other governments. For additional

information on exporting the SOFTWARE, see http://www.microsoft.com/exporting/.

LIMITATION ON SOFTWARE PROGRAMS USED ON THE DEVICE.

The combination of software programs you use on the DEVICE shall address not more than two (2) general office

automation or consumer computing functions. Such functions include, but are not limited to: email, word

processing, spreadsheets, database, network browsing, scheduling, and personal finance.

STORAGE/NETWORK USE.

The SOFTWARE may not be installed, accessed, displayed, run, shared or used concurrently on or from different

computers, including a workstation, terminal or other digital electronic device (“Computing System”).

Notwithstanding the foregoing and except as otherwise provided below, any number of Computing Systems, may

access or otherwise utilize the file and print services and internet information services of the SOFTWARE, if

included.

You may use the SOFTWARE on a single DEVICE as interactive workstation software, but not as server software.

However, you may permit a maximum of ten (10) Computing Systems to connect to the DEVICE to access and use

services of the SOFTWARE, such as file and print services and internet information services. The ten--connection

maximum includes any indirect connections made through other software or hardware which pools or aggregates

connections.

Warranty 2

Tektronix warrants that this product will be free from defects in materials and workmanship for a period of one (1) year

from the date of shipment. If any such product proves defective during this warranty period, Tektronix, at its option, either

will repair the defective product without charge for parts and labor, or will provide a replacement in exchange for the

defective product. Parts, modules and replacement products used by Tektronix for warranty work may be new or

reconditioned to like new performance. All replaced parts, modules and products become the property of Tektronix.

In order to obtain service under this warranty, Customer must notify Tektronix of the defect before the expiration of the

warranty period and make suitable arrangements for the performance of service. Customer shall be responsible for

packaging and shipping the defective product to the service center designated by Tektronix, with shipping charges prepaid.

Tektronix shall pay for the return of the product to Customer if the shipment is to a location within the country in which the

Tektronix service center is located. Customer shall be responsible for paying all shipping charges, duties, taxes, and any

other charges for products returned to any other locations.

This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate

maintenance and care. Tektronix shall not be obligated to furnish service under this warranty a) to repair damage resulting

from attempts by personnel other than Tektronix representatives to install, repair or service the product; b) to repair

damage resulting from improper use or connection to incompatible equipment; c) to repair any damage or malfunction

caused by the use of non-Tektronix supplies; or d) to service a product that has been modified or integrated with other

products when the effect of such modification or integration increases the time or difficulty of servicing the product.

THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THE PRODUCT IN LIEU OF ANY OTHER

WARRANTIES, EXPRESS OR IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY IMPLIED

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TEKTRONIX’

RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE AND EXCLUSIVE REMEDY

PROVIDED TO THE CUSTOMER FOR BREACH OF THIS WARRANTY. TEKTRONIX AND ITS VENDORS WILL

NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES

IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY

OF SUCH DAMAGES.

Service Options

Tektronix provides service to cover repair under warranty as well as other services that are designed to meet your specific

service needs. Advancing technology has brought incredible change to the power of measurement instruments. Manufac-

turing methods and calibration techniques have been revolutionized, making the service challenge tougher than ever. By

using Tektronix as your service provider you make use of our technology and product knowledge, our world-wide logistics

infrastructure, and our ISO9000 approved service centers. Tektronix technicians are trained on the latest products and are

equipped with the most current information on product improvements and upgrades for optimum product performance.

Warranty Repair Service. Tektronix technicians provide warranty service at most Tektronix service locations worldwide.

The warranty period for this product can be found behind the title page in this manual.

Calibration and Repair Service. Tektronix offers calibrations, non-warranty repair, and support for customers performing

their own service. Where appropriate, calibrations are compliant to ANSI/NCSL Z--540/ISO17025 and ISO9000 Quality

Systems. If you prefer to perform your own service, Tektronix supports repair to the replaceable-part level through

providing for circuit board exchange. All services can be purchased through a variety of agreements to fit your specific

requirements.

For more information regarding service offerings or service locations worldwide, please see the Tektronix product catalog

or visit us on our Customer Services World Center web site at:

http://www.tek.com/Measurement/Service.

RSA2203A & RSA2208A User Manual i

Table of Contents

General Safety Summary xiii...................................

Preface xv...................................................

About This Manual xv...............................................

Related Documents xvi...............................................

Conventions xvi....................................................

Getting Started

Product Overview 1--1.........................................

Features 1--1........................................................

Application 1--2.....................................................

Difference Between RSA2203A and RSA2208A 1--2.......................

Real-Time Analysis 1--3..............................................

Architecture 1--6....................................................

Installation 1--9...............................................

Unpacking to Check Contents 1--9......................................

Applying Power 1--10.................................................

Setting Up the Stand 1--13..............................................

Functional Check 1--14................................................

Powering Off the Analyzer 1--18.........................................

Restart 1--19.........................................................

Backing Up User Files 1--20............................................

About Installation of Other Applications 1--20..............................

Calibration 1--21...............................................

Cal Menu 1--22......................................................

Calibrating Gain 1--23.................................................

Calibrating Center Offset 1--24..........................................

Calibrating DC Offset (Option 05 Only) 1--25..............................

Adjusting Display Brightness 1--26.......................................

Confirming Performance 1--26..........................................

Operating Basics

Interface Maps 2--1............................................

Controls and Connectors 2--2..........................................

Display Screen 2--8..................................................

Functional Overview 2--13.......................................

Menu Keys 2--13.....................................................

Menu Operations 2--16................................................

Measurement Basics 2--21..............................................

Setting System Parameters 2--23.........................................

Using Windows XP 2--26...............................................

Table of Contents

ii RSA2203A & RSA2208A User Manual

Tutorial 2--29..................................................

Preparations 2--30....................................................

Displaying Spectrum 2--34.............................................

Using Markers and Peak Search 2--41.....................................

Using Averaging and Comparison Displays 2--46............................

Displaying a Spectrogram 2--49.........................................

Spectrum Analysis 2--52...............................................

Analog Modulation Analysis 2--56.......................................

Turning Off the Power 2--64............................................

Reference

Spectrum Analysis (S/A Mode) 3--1..............................

Measurement Screen Layout 3--2.......................................

Spectrum Analysis 3--4...............................................

Spectrogram Display 3--18.............................................

Real-Time Analysis 3--20..............................................

Zoom Function 3--24..................................................

Modulation Analysis (Demod Mode) 3--27..........................

Measurement Screen Layout 3--28.......................................

Analog Modulation Analysis 3--34.......................................

Time Analysis (Time Mode) 3--41.................................

Measurement Screen Layout 3--41.......................................

Time Variation Measurement 3--42.......................................

CCDF Measurement 3--46..............................................

Pulse Measurements 3--51..............................................

Setting Frequency and Span 3--61.................................

Frequency and Span Setting Menu 3--62...................................

Using the Channel Table 3--64..........................................

Using the Marker and Peak Search 3--65..................................

Frequency Setting Range 3--66..........................................

Vector Span 3--68.....................................................

Setting Amplitude 3--69.........................................

Amplitude Menu 3--69.................................................

Over-Voltage Input 3--73...............................................

Amplitude Correction 3--74.............................................

Setting Timing Parameters 3--83..................................

Timing Menu 3--83...................................................

Seamless Acquisition 3--87.............................................

Trigger 3--89...................................................

Trigger Menu 3--90...................................................

IF Trigger 3--96......................................................

Trigger Point Indicator 3--99............................................

FFT and RBW 3--101............................................

RBW/FFT Menu 3--102.................................................

FFT Points 3--105.....................................................

FFT Window 3--106....................................................

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Tektronix

Tektronix

Tektronix TLA5000B Series Instrucciones de instalación y mantenimiento

Tektronix

Tektronix MTS415 Manual de usuario

Tektronix

Tektronix P5210 Manual de usuario

Tektronix

Tektronix TLA7012 Manual de usuario

Tektronix

Tektronix RSA306 Manual de usuario

Tektronix

Tektronix TLA7S08 Instrucciones de instalación y mantenimiento

Tektronix

Tektronix A622 Manual de usuario

Tektronix

Tektronix TLA 714 Manual de usuario

Tektronix

Tektronix 1340 Manual de usuario

Tektronix

Tektronix RSA5103B Manual

Tektronix

Tektronix Keithley 2290-PM-200 Manual de usuario

Tektronix

Tektronix KEITHLEY 8606 Manual de usuario

Tektronix

Tektronix 308 Manual de usuario

Tektronix

Tektronix 1710J Series Manual de usuario

Tektronix

Tektronix 7D20 Manual de usuario

Tektronix

Tektronix RSA306B Manual de uso y cuidado

Tektronix

Tektronix VM Series Manual

Tektronix

Tektronix 2714 Manual de operación y mantenimiento

Tektronix

Tektronix DAS NT Option 04 Manual de usuario

Tektronix

Tektronix MTS415 Manual de usuario

Tektronix

Tektronix H600 RFHawk Manual de usuario

Tektronix

Tektronix 7D20 Manual de usuario

Tektronix

Tektronix 492, 492P Manual de usuario

Tektronix

Tektronix RSA6100A Series Manual de uso y cuidado

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario