TEKTELIC Communications Kona Micro Gateway Manual de usuario

TEKTELIC COMMUNICATIONS INC.

Document type: User Guide

Document number: T0005158_UG

Document version: 0.34

Document Status: Approved

Product name: Kona Micro Outdoor Gateway

Product codes: See Table 1

TEKTELIC Communications Inc.

7657 10th Street NE

Calgary, AB, Canada T2E 8X2

Phone: (403) 338-6900

All products, names and services are trademarks and registered trademarks of their respective companies.

Disclaimer:

Material contained in this document is subject to change without notice. The material herein is solely for

information purposes and does not represent a commitment by TEKTELIC or its representatives. TEKTELIC has

prepared the information contained in this document solely for use by its employees, agents, and customers.

Dissemination of this information and/or concepts to other parties is prohibited without the prior written consent

of TEKTELIC. In no event will TEKTELIC be liable for any incidental or consequential damage in connection with the

furnishing, performance or use of this material.

TEKTELIC reserves the right to revise this publication in accordance with formal change control procedures defined

by TEKTELIC.

Kona Micro Outdoor User Guide T0005158_UG Version 0.34

TEKTELIC Communications Inc. Confidential Page 2 of 32

Revision History

Version

Date

Status

Editor

Comments

0.2

Jan. 11, 2018

Draft

S. Morrison

First release

0.3

Feb, 01, 2018

Draft

S. Morrison

Added language translation

0.31 Feb. 13, 2018 Draft T. Danshin

Updated Table 1 and Table 4 to only reference

North American models

0.32

Feb. 13, 2018

Draft

T. Danshin

Updated product descriptions in Table 1 and 4

0.33

Feb 14, 2018

Approved

T. Danshin

Updated MPE information

0.34

Feb 14, 2018

Approved

T. Danshin

Updated Radio Compliance Statements

Kona Micro Outdoor User Guide T0005158_UG Version 0.34

TEKTELIC Communications Inc. Confidential Page 3 of 32

Table of Contents

1Product Description................................................................................................................. 5

1.1 Overview .......................................................................................................................... 5

1.2 Physical Interfaces............................................................................................................ 6

1.3 Specifications.................................................................................................................... 8

2Installation............................................................................................................................... 9

2.1 Safety Precautions............................................................................................................ 9

2.2 Unpacking and Inspection.............................................................................................. 10

2.3 Required Equipment for Installation.............................................................................. 10

2.4 Kona Micro Outdoor Gateway Mounting ...................................................................... 10

2.5 Ground Cable Installation .............................................................................................. 13

2.6 Direct DC Power Cable Installation ................................................................................ 14

2.7 RF Cable Installation....................................................................................................... 15

2.8Copper Ethernet Cable Installation................................................................................ 15

3Commissioning and Monitoring ............................................................................................ 16

3.1 Required Equipment ...................................................................................................... 16

3.2 Procedure....................................................................................................................... 16

4Radio Compliance Statements .............................................................................................. 17

5Description du produit........................................................................................................... 18

5.1 aperçu............................................................................................................................. 18

5.2 Interfaces physiques ...................................................................................................... 19

5.3 Spécifications.................................................................................................................. 21

6Installation............................................................................................................................. 23

6.1 Précautions de sécurité.................................................................................................. 23

6.2 Déballage et inspection.................................................................................................. 24

6.3 Équipement pour l'installation....................................................................................... 24

6.4 Montage de la passerelle Kona Micro Outdoor............................................................. 25

6.5 Installation du câble de masse....................................................................................... 27

6.6 Installation directe du câble d'alimentation CC............................................................. 28

Kona Micro Outdoor User Guide T0005158_UG Version 0.34

TEKTELIC Communications Inc. Confidential Page 4 of 32

6.7 Installation du câble RF .................................................................................................. 29

6.8 Installation du câble Ethernet en cuivre........................................................................ 29

7Mise en service et surveillance.............................................................................................. 30

7.1 Équipement requis......................................................................................................... 30

7.2 Procédure....................................................................................................................... 30

8déclarations de conformité radio.......................................................................................... 31

Kona Micro Outdoor User Guide T0005158_UG Version 0.34

TEKTELIC Communications Inc. Confidential Page 5 of 32

1Product Description

1.1 Overview

The Kona Micro Outdoor Gateway is an outdoor hardened LoRaWAN IoT gateway that supports

the full range of LoRa WAN channels. The Gateway supports one external LoRa antenna, an

internal GPS antenna, two power options including direct DC input power or Power over

Ethernet (PoE), and two backhaul options including copper Ethernet or 3G/4G wireless. Table 1

presents the currently available Kona Micro Outdoor Gateway models for the North American

market.

Table 1: Kona Micro Outdoor Gateway Models

Product Code Description

Region

T0004937

LORA GATEWAY MODULE, KONA MICRO, OUTDOOR, NA FDD, LTE MODEM

T0005129

LORA GATEWAY MODULE, KONA MICRO, OUTDOOR, NA FDD, LTE MODEM,

GEOLOCATION CAPABLE

T0005247

LORA GATEWAY MODULE, KONA MICRO, OUTDOOR, NA FDD

T0005248

LORA GATEWAY MODULE, KONA MICRO, OUTDOOR, NA FDD,

GEOLOCATION CAPABLE

Figure 1 illustrates the Kona Micro Outdoor Gateway external form-factor with the front view

on the left and rear view on the right. All models share the same mechanical form-factor.

Kona Micro Outdoor User Guide T0005158_UG Version 0.34

TEKTELIC Communications Inc. Confidential Page 6 of 32

Figure 1: Kona Micro Outdoor Gateway Common Dimensions

1.2 Physical Interfaces

Figure 2 illustrates the bulkhead layout for the Kona Micro Outdoor Gateway. All models share

the same bulkhead layout.

Kona Micro Outdoor User Guide T0005158_UG Version 0.34

TEKTELIC Communications Inc. Confidential Page 7 of 32

Figure 2: Kona Micro Outdoor Gateway Bulkhead Layout

All Kona Gateway module interconnect is located on the bottom facing bulkhead. The RF

connectors are water proof while un-mated but all other connectors must be terminated with

mating connectors or covered with the supplied protective cap when not in use in order to be

water tight. Connector types and their mating connectors are listed in Table 2.

Table 2: Kona Micro Outdoor Gateway Interface Connector Types

Interface

Connector Type

Mating Connector

LoRa Antenna

Ports N-Type female Industry standard N-Type male

DC Power

2 pin CPC

Protective

Earth

Ground

LoRa RF

Antenna

Copper

Ethernet

3G/4G Modem

SIM card

access port

Kona Micro Outdoor User Guide T0005158_UG Version 0.34

TEKTELIC Communications Inc. Confidential Page 8 of 32

3G/4G Modem

SIM card SIM card

Industry standard, located behind SIM card access port

cover

Copper Ethernet

Port Threaded, circular, RJ-45

Shenzhen Chogori Technology Co., Ltd. approved

mating connector (p/n 33000111-02 or equivalent)

Direct DC Power

Input Port

Threaded, circular, 2

contact DC power

Shenzhen Chogori Technology Co., Ltd. approved

mating connector (p/n 23002211-02, or equivalent)

Earth Ground

Chassis Protective Earth

Ground terminal Industry standard 2-hole lug, 1/4 x 0.75” spacing

1.3 Specifications

The Kona Micro Outdoor Gateway specifications are listed in Table 3.

Table 3: Kona Micro Outdoor Gateway Specifications

Attribute

Specification

Dimensions

222.2mm (8.7”) wide x 101mm (4.0”) deep x 287.3mm (11.3”) tall

Weight

5.1 kg (11.3 lbs)

Operating Temperature

-40°C to 60°C (-40°F to 140°F) at sea level Including solar loading.

Relative Humidity

10% to 100%

Operating Altitude

-60 m to 4,000 m (-197 ft to 13,123 ft)

Power Input, Direct DC

48 VDC nominal, 37 to 57 VDC operating range.

Positive or negative ground referenced feed. SELV source required.

5A recommended input overcurrent protection (2A minimum to 10A

maximum allowed).

Power Input, PoE

802.3 at (Type 2 Class 4), Mode A or Mode B or 4-pair Mode.

Power Consumption

20 W maximum

Weather Tightness

UL Type 6 (IP-67)

Regulatory Compliance

CSA/UL 60950-1 & CSA/UL 60950-22, CE IEC 60950-1

FCC Pt. 15, RSS-247, EN 301 489-1

Surge Protection

All interfaces are protected to primary levels.

Kona Micro Outdoor User Guide T0005158_UG Version 0.34

TEKTELIC Communications Inc. Confidential Page 9 of 32

2Installation

2.1 Safety Precautions

•The Kona Micro Outdoor Gateway must be installed in a restricted access location (such

that touching of the Gateway by non-service persons is not likely).

•The Kona Micro Outdoor Gateway may become hot to the touch during normal operation at

elevated ambient temperatures.

•The Kona Micro Outdoor Gateway has no internal field serviceable parts. The Gateway

module must only be opened by an approved TEKTELIC service center.

•All installation practices must be in accordance with the local and national electrical codes.

•Do not work on the system during periods of lightning activity.

•The Kona Micro Outdoor Gateway is considered permanently connected equipment. The

Protective Earth Ground connection (that is, the two-hole lug to chassis ground) is always

required.

•Ensure the Kona Micro Outdoor Gateway Protective Earth Ground connection is properly

terminated prior to the connection of any other interface.

•The Kona Micro Outdoor Gateway contains primary lightning surge suppression on the

Direct DC power port, the Copper Ethernet port, and the LoRa RF antenna port. The primary

lightning protectors have the ability to bridge the interface to chassis isolation boundary

during over-voltages. Ensure that the Protective Earth Ground connection is always in place.

•Ensure that the Kona Micro Outdoor Gateway is secured to eliminate any physical hazard to

people or property. The Gateway must be securely mounted according to the mounting

instructions prior to any cable connection and operation.

•The Kona Micro Outdoor Gateway does not contain a power disconnection device; a readily

accessible disconnection device must be incorporated external to the Kona Micro Outdoor

Gateway.

•The direct DC powered Kona Micro Outdoor Gateway shall be supplied through an input

overcurrent protection device rated not more than 10 A. The overcurrent protection must

have the appropriate current interrupt capacity for the power source and must be

incorporated into the non-earthed conductor(s) of the Kona Micro Outdoor Gateway DC

supply.

Kona Micro Outdoor User Guide T0005158_UG Version 0.34

TEKTELIC Communications Inc. Confidential Page 10 of 32

•For the direct DC power input, the DC positive pin must be at positive potential relative to

the DC negative pin. If the polarity is reversed, the unit will not sustain damage but will not

operate until the connection polarity is corrected.

•Although the Kona Micro Outdoor Gateway can be powered through either the direct DC

input or the power over Ethernet (PoE) input, simultaneous application of power to both

inputs may result in unexpected operation and shall be avoided.

•The Kona Micro Outdoor Gateway power source must meet SELV requirements.

•Always ensure the 3G/4G Modem SIM card access port is properly sealed after installing a

SIM card.

2.2 Unpacking and Inspection

The following should be considered during the unpacking of a new Kona Micro Outdoor

Gateway.

1. Inspect the shipping carton and report any significant damage to TEKTELIC.

2. Unpacking should be conducted in a clean and dry location when possible.

3. Do not discard the shipping box or foam inserts as they will be required if a unit is

returned for repair or re-configuration.

2.3 Required Equipment for Installation

The following tools are required to install the Kona Micro Outdoor Gateway module:

1. A 6 point metric socket set and torque wrench drive.

2. Anti-oxidant compound (NO-OX-ID, Penetrox, Noalox, Ox-Gard or equivalent).

3. A small wire brush.

4. A clean cloth.

5. Weatherproofing tape kit for the RF connector (Scotch Wireless Weatherproofing Kit,

WK-101 recommended).

6. Appropriately sized pipe clamps for pole mounting or appropriate screws or bolts (four

sized M8) with any required anchors according to the wall construction for wall

mounting.

2.4 Kona Micro Outdoor Gateway Mounting

Kona Micro Outdoor Gateway is designed to be mounted to a vertical pole or wall using the

supplied mounting bracket which attaches at the four screw locations on the back of the

module illustrated in Figure 3.

Otros manuales para Kona Micro Gateway

Tabla de contenidos

Idiomas:

Otros manuales de Puerta de TEKTELIC Communications

TEKTELIC Communications

TEKTELIC Communications KONA ENTERPRISE T0007242 Manual de usuario

TEKTELIC Communications

TEKTELIC Communications T0007915 Manual de usuario

TEKTELIC Communications

TEKTELIC Communications Kona Micro Gateway Manual de usuario

TEKTELIC Communications

TEKTELIC Communications T0008479 Manual de usuario

TEKTELIC Communications

TEKTELIC Communications T0004313 Manual de usuario

TEKTELIC Communications

TEKTELIC Communications Kona Micro Gateway Series Manual de usuario

TEKTELIC Communications

TEKTELIC Communications KONA Enterprise Manual de usuario

TEKTELIC Communications

TEKTELIC Communications Kona Micro Gateway Manual de usuario

TEKTELIC Communications

TEKTELIC Communications Kona Macro Gateway Manual de usuario

TEKTELIC Communications

TEKTELIC Communications Kona Mega Gateway Manual de usuario

TEKTELIC Communications

TEKTELIC Communications T0004978 Manual de usuario

TEKTELIC Communications

TEKTELIC Communications Kona Micro Gateway Manual de usuario

TEKTELIC Communications

TEKTELIC Communications Kona Micro Gateway Manual de usuario

TEKTELIC Communications

TEKTELIC Communications T0006268 Manual de usuario

TEKTELIC Communications

TEKTELIC Communications T0004142 Manual de usuario

TEKTELIC Communications

TEKTELIC Communications Kona Macro Gateway Manual de usuario

Manuales populares de Puerta de otras marcas

LST

LST M500RFE-AS Manual de usuario

Kinnex

Kinnex Media Gateway Manual de usuario

2N Telekomunikace

2N Telekomunikace 2N StarGate Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manual de usuario

Telsey

Telsey CPVA 500 - SIP Manual de usuario

RTA

RTA 460A-NNA4 Hoja de especificaciones

Shaw

Shaw Gateway HDPVR Manual de usuario

ABB

ABB VSN900 Guía de inicio rápido

Commander

Commander Pulse Manual de usuario

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manual de usuario

NETGEAR

NETGEAR C6300BD Manual de usuario

Amit

Amit CDW531AM Manual de usuario

HMS

HMS Netbiter EasyConnect EC150 Manual de usuario

Huawei

Huawei EchoLife HG620 Manual de usuario

AT&T

AT&T U-verse 3801 Manual de uso y cuidado

Logic IO

Logic IO RTCU MX2 turbo Manual de usuario

Suttle

Suttle MediaMAX MXM-521 Manual de usuario