Teknor Industrial Computers TEK-CPCI 1003 Manual del producto

NOTE:

Thismanualisforreferencepurposeonly.

Reproductioninwholeorinpartisauthorizedprovided

TEKNORINDUSTRIALCOMPUTERSINC.iscitedas

theoriginalsource.

ref.:M1003_1-1

TEK-CPCI1003

CompactPCIMobilePENTIUMIISBC

TECHNICALREFERENCEMANUALVERSION1.1b

November1998

TABLE OF CONTENTS

PART ONE – Product Description

1. PRODUCT OVERVIEW .............................................................................1-1

2. COMPATIBILITY WITH TEKNOR PRODUCTS .........................................2-1

3. UNPACKING .............................................................................................3-1

4. SAFETY PRECAUTIONS ..........................................................................4-1

4.1 STATIC ELECTRICITY ....................................................................................4-1

4.2 STORAGE ENVIRONMENT ..............................................................................4-1

4.3 POWER SUPPLY ..........................................................................................4-1

5. ONBOARD INTERCONNECTIVITY...........................................................5-1

5.1 CONNECTOR LOCATION ................................................................................5-4

5.2 ONBOARD CONNECTORS AND HEADERS..........................................................5-5

5.3 FRONT PLATE CONNECTORS.........................................................................5-6

5.4 COMPACTPCI CONNECTORS .........................................................................5-7

6. MEZZANINE CONCEPTS..........................................................................6-1

6.1 PROPRIETARY MEZZANINE CONCEPT..............................................................6-2

6.2 PMC CONCEPT ..........................................................................................6-2

6.3 COMPACTFLASH FEATURE ............................................................................6-3

TEK-CPCI-1003 Technical Reference Manual

PART TWO – Feature Description

7. ONBOARD FEATURES.............................................................................7-1

7.1 COMPACTFLASH INTERFACE..........................................................................7-1

7.2 ENHANCED IDE INTERFACES.........................................................................7-3

7.3 ETHERNET INTERFACES................................................................................7-4

7.4 FLOPPY DISK INTERFACE ..............................................................................7-6

7.5 KEYBOARD/MOUSE INTERFACE......................................................................7-6

7.6 PARALLEL PORT..........................................................................................7-7

7.7 POWER MANAGEMENT..................................................................................7-9

7.8 SCSI INTERFACE ........................................................................................7-9

7.9 SERIAL PORTS ..........................................................................................7-10

7.10 THERMAL MANAGEMENT.............................................................................7-14

7.11 USB INTERFACES......................................................................................7-15

7.12 VIDEO INTERFACE......................................................................................7-16

7.13 V-PORT ...................................................................................................7-18

PART THREE – Installation and Settings

8. CUSTOMIZING THE BOARD ....................................................................8-1

8.1 PROCESSOR AND FAN ..................................................................................8-1

8.2 BACKUP MEMORY........................................................................................8-2

8.3 INSTALLING MEMORY....................................................................................8-3

8.4 SUPERVISION FEATURES...............................................................................8-5

9. SETTING JUMPERS .................................................................................9-1

JUMPER LOCATION...................................................................................................9-2

JUMPER SETTINGS (TABLE 1)....................................................................................9-3

JUMPER SETTINGS (TABLE 2)....................................................................................9-4

10. BUILDING A CPCI SYSTEM....................................................................10-1

10.2 INSTALLING THE BOARD INTO A BAY...............................................................10-4

Table of Contents

iii

11. CPCI I/O SIGNALS.................................................................................. 11-1

11.1 J3 SIGNAL SPECIFICATION ..........................................................................11-1

11.2 J4 SIGNAL SPECIFICATION ..........................................................................11-3

11.3 J5 SIGNAL SPECIFICATION ..........................................................................11-6

PART FOUR – Software Setups

12. AWARD SETUP PROGRAM ...................................................................12-1

12.1 ACCESSING THE AWARD SETUP PROGRAM......................................................12-2

12.2 USING AWARD SETUP PROGRAM...............................................................12-3

12.3 SETUPS ...................................................................................................12-5

13. UPDATING THE BIOS WITH UPGBIOS..................................................13-1

13.1 CPLD UPGRADE AFTER A BIOS UPDATE .....................................................13-2

14. VT100 MODE...........................................................................................14-1

14.1 REQUIREMENTS.........................................................................................14-1

14.2 SETUP & CONFIGURATION ..........................................................................14-1

14.3 RUNNING WITHOUT A TERMINAL...................................................................14-2

PRODUCT DESCRIPTION

1. PRODUCT OVERVIEW

2. COMPATIBILITY WITH TEKNOR PRODUCTS

3. UNPACKING

4. SAFETY PRECAUTIONS

5. ONBOARD CONNECTIVITY

6. MEZZANINE CONCEPTS

1-1

1. PRODUCT OVERVIEW

The TEK-CPCI-1003 is the first CompactPCI™ industrial SBC based on the Intel’s Pentium®

II processor in a ‘mini-cartridge’ package (Mobile Pentium®II).

The board supports 233MHz, 266MHz, 300MHz, and future processors, 512KB L2 pipelined

burst cache and Intel’s 82443BX and 82371AB PIIX4E chipset. It features J3/J4/J5 de-facto

industry standard connectors to handle I/O signals such as serial, parallel, and USB ports,

Ethernet, video and V-Port, SCSI, and IDE interfaces, keyboard, speaker, mouse, and reset

signals, SMBus and power.

The TEK-CPCI-1003 can be purchased either for front plate I/O interfacing (video, serial

ports, Ethernet ports) or rear panel I/O interfacing (no interconnection capability available on

the front plate) through CPCI I/O connectors.

The front plate may be adapted (optional) to support standard mouse, keyboard and floppy

connections when adding a mezzanine board to the SBC or a PMC card.

The board is intended to provide the highest level of performance and throughput for the

32/64-bit CompactPCI™ operating environments. The rugged design of the TEK-CPCI-

1003, as well as its very rich feature-set, makes it an outstanding choice for numerous high-

availability applications ranging from telecommunication to computer intensive industrial and

mission-critical medical applications.

The TEK-CPCI-1003 board is fully compatible with existing application software and

operating systems available for desktop PCs: PC and MS-DOS, Windows3.1, Windows

95, WindowsNT, OS/2Warp, QNX, NOVELL, UnixWare.

TEK-CPCI-1003 Technical Reference Manual

1-2

§Supported Processors

Single 233MHz, 266MHz, or 300MHz Mobile Pentium II processor with Intel’s

82443BX and 82371AB PIIX4 chipset.

§Memory

System memory:The TEK-CPCI-1003 supports from 8MB to 384MB vertical

SDRAM on three 168-pin DIMMs sockets with ECC

capabilities. Registered SDRAM (RSDRAM) is also

supported for up to 768MB of system memory.

Internal cache:32KB (L1), 512KB (L2) pipelined burst cache is implemented

to enhance the processor operations by eliminating wait states

on cache accesses.

§CompactPCI Connectors

Rear panel CPCI connectors are PICMG 2.0 R2.1 CompactPCIspecification

compliant. CompactPCI connectors are located at the rear edge of the board. The

complete CPCI connector configuration is composed of five connectors referred to as

J1, J2, J3, J4, and J5. They are defined as 2mm pitch, shielded connectors with a 5x47

array of pin for signals and 2 rows of 47 pins for shielding.

Their function is described below:

J1/J2: carry out arbitration and PCI bus signals, and power.

J3/J4/J5: handle I/O signals.

Product Overview

1-3

§Interfacing with the Environment

CPCI The TEK-CPCI-1003 SBC is provided for rack-mounted systems. Through

the J1/J2 segment, the board can drive up to seven external CompactPCI slots,

supporting individual REQ/GNT arbitration signals and individual clocks.

All I/O signals are duplicated and available through the J3/J4/J5 I/O segment to

be distributed to their respective I/O connectors located on the backplane.

When connecting the board to a backplane, ensure the backplane is capable of

supporting these signals. It must also make them available on individual local

headers.

A backplane dedicated to the TEK-CPCI-1003 is provided by TEKNOR, and is

referred to as TEK-CPCI 1103 CPCI Passive Backplane.

Mezzanine The mezzanine is a new hardware concept introduced by TEKNOR to

increase the I/O connectivity of the TEK-CPCI-1003, but respecting the dual

slot 8U form factor restrictions.

PCI bus, IDE floppy, keyboard and mouse signals are provided on two

connectors to support mezzanine applications: optional storage devices (HD

and FD), CD-ROM device or PCI-to-PCI bridge can easily be added to the

system without any loss of I/O slot on the backplane.

Some mezzanine from TEKNOR feature PS/2 standard mouse and keyboard

plugs for direct connection on the face plate (TEK-CPCI-1050 and 1051 storage

mezzanines).

2-1

2. COMPATIBILITY WITH TEKNOR PRODUCTS

The TEK-CPCI-1003 CPU Single Board Computer is a member of the TEKNOR

CompactPCI product family. The board is fully compliant with the PICMG 2.0 R2.1

CompactPCI specification for the PCI bus segment.

When building a basic environment around the TEK-CPCI-1003, the system may be

composed with any of the following devices:

§TEK-CPCI-1003: 6U system board

§TEK-CPCI-1103: 8 slots - CompactPCI backplane

§TEK-CPCI-1106: 16 slots - CompactPCI backplane

§TEK-CPCI 1050: HD, FD, keyboard, and mouse mezzanine

§TEK-CPCI 1051: HD, FD, keyboard, mouse, and PCI-to-PCI bridge

mezzanine

§TEK-CPCI 1070: 6Ux8HPx100mm - Rear I/O interface module

§TEK-CPCI 1071: 6Ux8HPx80mm - Rear I/O interface module

§TEK-CPCI 1080: 6Ux8HP – HD and CD-ROM CompactPCI unit

§3U and 6U CompactPCI devices

§6U form factor enclosure

§ATX Power Supply

§Hot-swap, load-sharing power supply unit

A CompactPCI Development Platform is available from TEKNOR and is referred to as

TEK-CPCI-1203.

3-1

3. UNPACKING

Follow these recommendations while unpacking:

1. After opening the box, save it and the packing material for possible future shipment.

2. Remove the board from its antistatic wrapping and place it on a grounded surface.

3. Inspect the board for damage. If there is any damage, or items are missing, notify

TEKNOR immediately.

Contents

When unpacking you will find:

1. One TEK-CPCI-1003, Mobile Pentium II Single Board Computer

2. One Quick Reference sheet

3. Diskettes

Tabla de contenidos

Otros manuales de Computadora de placa única de Teknor Industrial Computers

Teknor Industrial Computers

Teknor Industrial Computers VIPer808 Manual del producto

Teknor Industrial Computers

Teknor Industrial Computers TEK-AT4L Plus Manual del producto

Teknor Industrial Computers

Teknor Industrial Computers TEK993 Manual del producto

Manuales populares de Computadora de placa única de otras marcas

WIN Enterprises

WIN Enterprises PL-80910 Manual de usuario

AXIOMTEK

AXIOMTEK SBC81206 Series Manual de usuario

Embest

Embest SOM-PH8800 Manual de usuario

SeaLevel

SeaLevel SBC-R9 Manual de usuario

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Manual de usuario

WinSystems

WinSystems PPM-LX800-G Manual de usuario

GIGAIPC

GIGAIPC QBiX-PPC Series Manual de usuario

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Manual de usuario

Commell

Commell FS-978 Manual de usuario

GIGAIPC

GIGAIPC QBiP-8665A/ Manual de usuario

VersaLogic

VersaLogic Python EBX-11 Manual de usuario

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Manual de usuario

CompuLab

CompuLab SB-A510 Manual de usuario

Boser

Boser HS-7321 Manual de usuario

Premier Farnell

Premier Farnell Embest SBC8530 Manual de usuario

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Manual de usuario

Aaeon

Aaeon UP Manual de usuario

Portwell

Portwell WUX Series Manual de usuario