TEINNOVA TECAI ELEMENT Manual de usuario
1-34
user manual ENG
Tecai electropneumatic brushing robot
Original manual translation
Tecai electropneumatic brushing robot 2-34
introduction
Dear customer:
Many thanks for having placed your trust in a quality product from
TEINNOVA.
This product has been developed with modern manufacturing
procedures and a range of measures to guarantee quality.
We endeavour to do everything possible so that you are satisfied
with this product and can work with it without any problems.
If you have any questions about this product please contact your
distributor or contact our company directly.
Before starting the machine, carefully read the usage instructions for
your equipment.
Consider this manual as part of the machine and always have it to
hand for future queries.
Our training services have been designed to support our clients in
achieving their objectives and together we develop training
programmes that suit their strategy.
We offer the possibility of providing companies with specific training
for using our equipment and training their operatives so that they can
perform the best service and thus contribute to the success of their
end clients. This includes aspects such as knowing how to draft a
good and objective budget, responding to specific problems that
might arise or offering a more professional and efficient service.
Thanks to manufacturing the cleaning equipment ourselves we
can control the quality and the performance of each machine we
manufacture at all times. This has allowed us to have very low repair
rates which have always been resolved by our own Technical
Assistance Service in very short time frames. The service is managed
by the same human team as the factory.
We have every type of replacement available for your equipment as
well as related accessories.
This instruction manual is protected by copyright. We reserve all rights, especially
the right to produce, translate and create using electronic systems.
Training services
Technical service
941445056941445056
Tecai electropneumatic brushing robot 3-34
contents
symbols
safety warnings
conditions of use
know your machine
control panel
remote control
accessories and related equipment
operating instructions
transport
5-34
6-34
7-34
8-34
9-34
10-34
11-34
17-34
26-34
Tecai electropneumatic brushing robot 4-34
contents
maintenance and care
waste management
problem solving guide
technical specifications
conditions of the guarantee
declaration of compliance “CE”
27-34
30-34
31-34
32-34
33-34
34-34
Tecai electropneumatic brushing robot 5-34
All of the graphic symbols shown in this manual as well as those indicated
on the equipment itself are explained in this section. It is important to read
the text relating to these symbols with special care as it concerns personal
and equipment safety.
DANGER!
This symbol warns of a potentially dangerous situation that could cause
serious injuries or even death if the indicated instructions are not followed
appropriately. Ensure that you read all the instructions described in the
“Safety information” section.
WARNING!
This symbol warns of a potentially dangerous situation that could cause
mildormoderateinjuriesordamagetopropertyandpersonalinjuriesifthe
indicated instructions are not followed appropriately.
CAUTION!
This symbol warns of a situation that could cause damage to property
without causing personal injuries if the indicated instructions are not
followed appropriately.
IMPORTANT NOTE!
This symbol warns of information relating to the optimal use of the
equipment in order to avoid possible handling errors.
symbols
Tecai electropneumatic brushing robot 6-34
The TECAI ELEMENT AUTO equipment must NOT be used for anything other than the uses outlined
in this instruction manual.
Before starting up the equipment ensure that all connections are correct.
Before starting up the equipment ensure that the brush is inside the duct to be cleaned.
Take care to place your TECAI ELEMENT AUTO on a smooth and stable surface. Lock the
front wheel brakes so that the machine remains stable while you work.
Persons operating the TECAI ELEMENT AUTO equipment must be sufficiently
trained.
Hold the hose firmly before starting the motor for the pneumatic brush. Always keep
a firm hold of the hose while working with the brush.
It is mandatory to use safety glasses in order to avoid the possibility of dust
splashing into the eyes of the operator.
Adequately secure the TECAI ELEMENT AUTO and lock the wheels when transporting it in a
vehicle.
Do not open the control box on your TECAI ELEMENT AUTO duct cleaning robot. In the event of
a breakdown, get in touch with TEINNOVA’s Technical Assistance Service on telephone number:
+34 941 44 50 56.
safety warnings
Tecai electropneumatic brushing robot 7-34
Any other use is completely
prohibited without written
permission from the manufacturer.
Do not, under any circumstances,
place the TECAI ELEMENT
AUTO in a horizontal position as
this will cause the machine to
break down
TECAI ELEMENT AUTO is an electropneumatic brushing machine for performing duct cleaning in air
conditioning systems, whether circular with diameters of 150-1000 mm or rectangular. The appropriate
accessories shall be available for each type of duct.
A 20 metre hose is included so 40 metres of the same tube can be cleaned from the same point in the
tube. It can be used in flues and extraction hoods.
It can be used in combination with the AIRNET320 compressed air generator or with the AR20
compressed air generator as shown in the usage diagram.
conditions of use
AR20
Compressed air
generator
TECAI ELEMENT AUTO
Electropneumatic brushing robot
for cleaning ducts.
KEY electric power supply
compressed air
Tecai electropneumatic brushing robot 8-34
Components:
1- Carrying handle
2- Head
3- Simple brush coupler
4- Hose
5- Compressed air inlet
6- Power connection
7- Back wheel
8- Hose reel
9- Front brake
10- Compressed air duct
11- Front wheel
12- Front brake
13- Regulator system + lubricant
14- Compressed air duct
15- Display
16- ON / OFF
17- STOP (emergency stop)
know your machine
1
56711 12
13
4
3
214
1516
9
10
17
8
Tecai electropneumatic brushing robot 9-34
2 3 4
1
2
3
4
Main control panel:
Display
Control arrow keys
ON / OFF
STOP
ON/OFF button for activating/deactivating the equipment.
Emergency stop.
Control display (STOP, anti-clockwise rotation, clockwise
rotation and AUTO mode).
-STOP.
-Anti-clockwise motor rotation.
-Clockwise motor rotation.
-Automatic mode activation.
control panel
1
Tecai electropneumatic brushing robot 10-34
Remote control panel:
remote control
1
3
4
5
2
STOP
Clockwise rotation
Release button
Anti-clockwise
rotation
Timer
This is for stopping the machine immediately.
Power up the Tecai brushing machine’s motor so that its
rotation movement is anti-clockwise.
Operate the timer on the Tecai brushing machine so that its
rotating movement lasts for the selected time.
Power up the Tecai brushing machine’s motor so that its
rotation movement is clockwise.
This is a safety measure for when starting the functions from
the control panel.The release button must be pressed in
order to start any of the functions apart from the STOP
button, which can be pressed without needing to press the
release button.
34
5
2
1
A23 battery
12V
Tabla de contenidos
Otros manuales de Robótica de TEINNOVA
Manuales populares de Robótica de otras marcas
STEMCenter USA
STEMCenter USA Pi-Bot v2.00 Manual de usuario
SunFounder
SunFounder PiDog Manual de usuario
Universal Robots
Universal Robots UR5 Manual de usuario
Universal Robots
Universal Robots E Series Manual de usuario
YASKAWA
YASKAWA MOTOMAN-MPL80 II Manual de usuario
EFORT
EFORT ECR5 Manual de instrucciones
