TECshow PROTON 6 HEX USB Manual de usuario

PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE /

POR FAVOR LEA LAS INSTRUCCIÓNES ANTES DE USAR

USER MANUAL / MANUAL DE USUARIO

PROTON 6

HEX USB

PROTON 6 HEX USB

1. OVERVIEW

Proton 6 HEX USB is a professional, light & compact ﬁxture

angle. The unit is equipped with Hex-color LED technolo-

gy, enabling deeply saturated colors & UV eﬀect with no

multi-colored shadows. Proton 6 HEX USB sports 16-bit

dimmer with 4 dimming curves, strobe eﬀect & a 600Hz re-

fresh rate for ﬂicker free video playback. Amongst its most

relevant features the user will ﬁnd the built-in USB port that

- in combination with NEO Stick USB - allows the user to

control the unit in wireless mode or via NEO Wi app – iOS®

& Android®.

SPECIFICATIONS

Source & Optic

• Light Source: 6 RGBAW+UV 10W LEDs

• LEDs life: 50,000 hours

• Beam angle: 23º

• Field angle: 41º

Photometric Data

• Flux: 747 lux @ 6.5 ft.

Effects & Functions

• Controllable via NEO Wi app - iOS® & Android® -

Combined with the NEO Stick USB

• Hex-color LED technology: Smooth RGBWA+UV

mix with no multi-colored shadows

• Color macros and rainbow eﬀect

• Dimmer: 0-100% general & for all colors

• 4 dimming curves

• Strobe eﬀect: 0-30 Hz

• Flicker free (ideal for broadcasting)

• 4 built-in programs

• Controllable via IR-6 control (optional)

• Built-in microphone

• Very silent operation

Control

• DMX Channels: 6/11

• Operational modes: DMX, Master/Slave, Auto-

run and Sound-active

• USBportforWi-ﬁcontrol(Through NEOUSBStick)

• Electrical

• Input voltage range: AC100–240V, 50-60Hz

• Power consumption: 60W

• Power linking:

• 110V: Up to 9 units

• 220V: Up to 16 units

• Physical

• IP Rating: IP20

• 4-digit LED display

• DMX connectors: 2 XLR connectors (XLR-3 in-

put and output)

• IEC In/Out power supply connectors

• USB Port

• Dimensions: 211x244x92 mm. / 8.3x9.6x3.6 in.

• Weight: 1.6 Kg. / 3.5 Lbs.

ENGLISH VERSION

PROTON 6 HEX USB

2. SAFETY INSTRUCTIONS

1. The products referred to in this manual conform

to the European Community Directives and are

there- fore marked with .

2. The unit is supplied with hazardous network

voltage (230V~). Leave servicing to skilled per-

sonnel only. Never make any modiﬁcations on

the unit not described in this instruction manual,

otherwise you will risk an electric shock.

3. Connection must be made to a power supply sys-

tem ﬁtted with eﬃcient earthing (class I appliance

according to standard EN 60598-1). It is, moreo-

ver, recommended to protect the supply lines of

the units from indirect contact and/or shorting to

earthbyusingappropriately sizedresidualcurrentdevices.

4. The connection to the main network of electric

distribution must be carried out by a qualiﬁed

electrical installer. Check that the main frequency

and voltage correspond to those for which the

unit is designed as given on the electrical data label.

5. Thisunitisnotforhomeuse,onlyprofessionalapplications.

6. Never use the ﬁxture under the following conditions:

- in places subject to vibrations or bumps;

- in places with a temperature of over 45 °C.

7. Make certain that no inﬂammable liquids, water or

metal objects enter the ﬁxture.

8. Do not dismantle or modify the ﬁxture.

9. All work must always be carried out by a qualiﬁed

technical personnel. Contact the nearest sales

pointforaninspectionorcontact themanufacturerdirectly.

10. If the unit is to be put out of operation deﬁnitvely,

take it to a local recycling plant for a disposal which

is not harmful to the environment.

ENGLISH VERSION

WARNING AND INSTALLATION PRECAUTIONS

• If this device will be operated in any way diﬀerent

to the one described in this manual, it may suﬀer

damage and the guarantee becomes void. Further

more, any other operation may lead to dangers like

short circuit, burns, electric shock, etc.

• Before starting any maintenance work or cleaning

the projector, cut oﬀ power from the main supply.

• For inside use only. Not designed for outside use.

• The minimum distance between the ﬁxture and

surrounding walls must be more than 50cm and

theair ventsat thehousingmustnotbecoveredinanycase.

• Install the ﬁxture in a well ventilated place.

• Keep any inﬂammable material at a safe distance

from the ﬁxture.

• The maximum temperature that can be reached

on the external surface of the ﬁtting, in a thermally

steady state, is high. After power oﬀ, please cool

down over 15 minutes.

• Shields, lenses or ultraviolet screens shall be

changed if they have become damaged to such an

extent that their eﬀectiveness is impaired.

• The lamp(LED) shall be changed if it has become

damaged or thermally deformed.

• Never look directly at the light beam. Please note

that fast changes in lighting, e.g. ﬂashing light, may

trigger epileptic seizures in photosensitive per-

sons or persons with epilepsy.

PROTON 6 HEX USB

ENGLISH VERSION

3. OVERVIEW

Rear View

PROTON 6 HEX USB

ENGLISH VERSION

DIMENSIONS

86.5

91.5

244

157.5

196

211

167

135

PROTON 6 HEX USB

ENGLISH VERSION

Operating Elements and Connections

1. MOUNTING BRACKET

2. LOCKING KNOB: for the mounting bracket

3. DMX IN (3-pole XLR):

1 = ground, 2 = DMX -, 3 = DMX +

4. DMX OUT (3-pole XLR):

1= ground, 2 = DMX -, 3 = DMX +

5. POWER IN: mains plug for connection to a socket

(100-240V~/50-60Hz) via the supplied mains cable.

The support for the mains fuse is located near the main plug.

Only replace a blown fuse by one of the same type .

6. CONTROL PANEL: with display and 4 button used to

access the control panel functions and manage them.

7. Universal Serial Bus (USB) for UFI only

8. POWER OUT: connect to supply power to the next unit.

9. SAFETY ANCHOR to attach safety cable

PROTON 6 HEX USB

ENGLISH VERSION

4. INTRODUCTION

MOUNTING

PROTON 6 HEX USB may be set up on a solid and even

surface. The unit can also be mounted upside down to a

cross arm. For ﬁxing, stable mounting clips are required.

The mounting place must be of suﬃcient stability and be

able to support a weight of 10 times of the unit’s weight.

When carrying out any installation, always comply scrupulous-

ly with all the regulations (particularly regarding safety) cur-

rently in force in the country in which the ﬁxture’s being used.

• Install the projector at a suitable location by means of the

mounting bracket (1).

• Always additionally secure the projector with the safety

rope from falling down. For this purpose, fas-

ten the safety rope at a suitable position so that the maxi-

mum fall of the projector will be 20 cm.

• Adjust the projector and use the knob (2) to slightly re-

lease or tighten the locking mechanism of the

6CH - 11CH ), then press the button ENTER.

bracket if is necessary.

PROTON 6 HEX USB

ENGLISH VERSION

Functions of the buttons

5. FUNCTIONS & SETTINGS

OPERATION

Connect the supplied main cable to a socket (100-240

VAC-50/60 Hz). Then the unit is ready for operation and

can be operated via a DMX controller or it independently

performs its show program in succession.

To switchoﬀ, disconnect the mains plug from the socket. For

a more convenient operation it is recommended to connect the

unit to a socket wich can be switched on and oﬀ via a light switch.

BASIC

Access control panel functions using the four panel but-

tons located directly underneath the LED Display:

PROTON 6 HEX USB

ENGLISH VERSION

MENU STRUCTURE

PROTON 6 HEX USB

ENGLISH VERSION

Auto Show

The ﬁxture has a built in automatic program. To access this,

please see the below instructions:

• Press the button MENU so many times until the

display shows P--, then press the button ENTER.

• Press the button UP/DOWN to switch between

programs P1-P4.

•Press the button MENU until S-- appears on the

display.

• Use the button UP/DOWN to select the auto

programs speed S001 - S100 (slow-fast).

• Press the button ENTER save the setting.

Sound mode

In music mode, via its integrated microphone, the unit can

be controlled by music with a clear rhythm in the bass range.

If the music control should not work optimally, increase the

volume or reduce the distance between the sound source

and the light eﬀect unit.

• Press the button MENU so many times until the

display shows Snd.

• Using UP/DOWN button, select one of the

modes Snd1 or Snd2. Press ENTER

• You can set the microphone sensitivity pressing

the button MENU so many times until the display

show Sens

• Using the buttonUP/DOWN, select the desired

value sensitivity (slow-fast) u0 - u100.Press ENTER

Static Color

• The ﬁxture has the ability to accept custom static

color settings. Access these chases via the control

panel on the back of the ﬁxture.

• Press the button MENU so many times until the

display shows C.., then press ENTER.

Manual Color

This mode allows to combine the colors red, green, blue,

amber, white and UV (r, g, b, a, w, p).

• Press the button MENU so many times until the

display shows U-- , then press the button ENTER.

• Select the color r, g, b, a, w, p through the buttons

UP/DOWN. Then ENTER.

• Using UP/DOWN button, select the desired

color value 000 - 255.

• Press ENTER button to continue to the next color.

• Continue until the desired mix is obtained.

• Press the MENU button to go back or to meet the

waiting time to exit the setup menu.

Dimmer

Enter in Dimmer mode to select speciﬁc dimming curve,

press the button MENU several times until shows dIM and

press ENTER to conﬁrm.

• Press the button UP/DOWN to select OFF -

dIM1 - dIM2 - dIM3.

• Press ENTER button to store.

• Press the MENU button to go back or to meet the

waiting time to exit the setup menu.

Linking

Several Units may be interconnected in order to control all

further slave units to the same eﬀect of the master unit. Use

standard DMX cables to daisy chain your units together via

the DMX connector on the rear of the units. For longer ca-

ble runs, we suggest a terminator at the last ﬁxture.

• Connect the DMX OUT of the master unit via 3

pole XLR cable to the DMX IN of the ﬁrst slave unit.

• Connect the DMX OUT of the ﬁrst slave unit to

the DMX IN of the second slave unit, etc. until all

units are connected in a chain.

DMX Configuration

Proton 6 HEX USBisequippedwithdiﬀerentDMX conﬁguration.

• Press MENU to select the desired DMX conﬁgu-

ration (6ch-11ch).

• Press the button UP/DOWN to select the desid-

er value (001 - 512), then press the button ENTER

to conﬁrm.

• Press the MENU button to go back or to meet the

waiting time to exit the setup menu.

Tabla de contenidos

Idiomas:

Otros manuales de Equipo de DJ de TECshow

TECshow

TECshow NEBULA MAX 240 Manual de usuario

TECshow

TECshow ALFIE WASH BM Manual de usuario

TECshow

TECshow MUSHROOM 40W Manual de usuario

TECshow

TECshow bangtec Manual de usuario

TECshow

TECshow cityTEC Manual de usuario

TECshow

TECshow octobeam Manual de usuario

TECshow

TECshow HALO 80 LED Manual de usuario

TECshow

TECshow clovertec Manual de usuario

TECshow

TECshow TWISTER 360 Manual de usuario

TECshow

TECshow iON 230B Manual de usuario

TECshow

TECshow Barcob 8 Manual de usuario

TECshow

TECshow BEAMPIX 14 Manual de usuario

TECshow

TECshow 4beamTEC Manual de usuario

TECshow

TECshow Ion 280 3-in-1 Manual de usuario

TECshow

TECshow NEBULA ZOOM Manual de usuario

TECshow

TECshow MasterPAR Manual de usuario

TECshow

TECshow HALO 712 XL Manual de usuario

TECshow

TECshow LycoZoom 50 Manual de usuario

TECshow

TECshow FRESNELED 3100 MKII Manual de usuario

TECshow

TECshow BLINDER LITE Manual de usuario

TECshow

TECshow ION 575 Manual de usuario

TECshow

TECshow NAVIGATOR NODE POE Manual de usuario

TECshow

TECshow Alfie Manual de usuario

TECshow

TECshow QUADBAR 12 PIX Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario