TECshow FRESNELED 3100 MAX Manual de usuario

PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE /

POR FAVOR LEA LAS INSTRUCCIÓNES ANTES DE USAR

USER MANUAL / MANUAL DE USUARIO

FRESNELED

MAX

FRESNELED MAX

1. OVERVIEW

Fresneled 3100 MAX is a Fresnel LED powered by 1 250W

COB LED that works at 3100K and has a performance 50%

greater than the MKII version, which has an output similar

to the classic 2000W halogen fresnels. In addition to hav-

ing a 90Ra color reproduction, the ﬁxture is equipped with

a zoom function that allows to vary its beam angle between

15º and 60º, adding great versatility to any fresnel applica-

tion. Thanks to its COB LED, Fresneled 3100 MAX enables

a great energy saving and a very low heat generation, impor-

tant attributes for both theater and broadcasting. Finally, its

16-bit dimmer with four dimming curves, strobe eﬀect and

selectable refresh rate, which guarantees ﬂicker-free oper-

ation, are some of its most remarkable features.

SPECIFICATIONS

Source & Optic

• Light Source: 1 250W COB LED

• Color temperature: 3200K

• LEDs life: 50,000 hours

• Zoom: 15º-60º linear zoom

• Selectable refresh rate: 600Hz, 1200Hz, 2000Hz,

4000Hz & 25000Hz

Photometric Data

• Luminous Flux:

• 15º: 5416 lm

• 60º: 10519 lm

• Color rendering: >90Ra

• Flux: 15º: 4000 Lux @ 5M (16 ft.)

• Flux: 60º: 404 Lux @ 5M (16 ft.)

Effects & Functions

• Dimmer: Full range 0-100% (16-bit)

• 4 dimming curves

• Strobe eﬀect: 0-20 ﬂashes per second

• 15º-60º Electronic zoom

• Flicker free

Control

• DMX channels: 1/2/3

• Operational modes: DMX, Static, Master/Slave

& On-board control

• RDM Function

Electrical

• Input voltage range: AC100–240V, 50-60Hz

• Power consumption: 180W

Physical

• LED display

• DMX connectors: 4 XLR connectors (XLR-3 In

and Out; XLR-5 In and Out)

• Power supply connectors: PowerCON® In/Out

• Cooling: Forced convection

• Dimensions: 417x286x260 mm. / 16.5x11x10 in.

• Weight: 6.6 Kg. / 14.5 Lbs.

ENGLISH VERSION

FRESNELED MAX

2. SAFETY WARNING

• This product must be installed by a qualiﬁed pro-

fessional ONLY.

• All maintenance must be carried out by a qualiﬁed

electrician ONLY.

• All minimum distance of 0.5m must be maintained

between the equipment and a combustible surface.

• The product must always be operated in a well

ventilated area.

• DO NOT stare directly into the LED light source.

• Always disconnect the power before carrying out

any maintenance.

• The earth must always be connected to the ground

• Ensure that all parts of the equipment are kept

clean and free of dust.

• A minimum distance of 0.8m must be maintained

between the light and projecting surface.

ENGLISH VERSION

FRESNELED MAX

ENGLISH VERSION

3. INSTALLATION

The LED ﬁxture can be mounted in a hanging position using

the supporting bracket. The bracket should be secured to the

mounting truss or structure using a standard mounting clamp.

Please note that when hanging the unit a safety cable should

also be used.

Hanging

MOUNTING-

POWER CONNECTIONS

220-240V: 10 UNITS may be connected in series

110-120V: 5 UNITS may be connected in series

FRESNELED MAX

ENGLISH VERSION

4. DISPLAY PANEL OPERATION

MENU: Return to the previous menu

ENTER: Enter the currently selected menu.

UP: Scroll down through the current menu list or decrease the

value of the current function.

DOWN: Scroll up through the current menu list or increase the

value of the current function.

DISPLAY OPERATION

QUICK-ACCESS KEYS

MENU: By press and holding the MENU key when at the

main menu it is possible to directly access the DIM function.

CONTROL KNOB

• DIMMER

• ZOOM

NOTES:

• Press the adjusting button (any one) twice, the ﬁx-

ture will be in STAT mode;

• Press the DIMMER button, DIM shows in the menu,

the value range is 0-100%;

• Press ZOOM button, value range 0-100% appears.

FRESNELED MAX

ENGLISH VERSION

MENU MAP

FRESNELED MAX

ENGLISH VERSION

DIMMER (STAT)

• DIM: To adjust level of intensity

• ZOOM: To adjust the zoom position.

NOTES:

• When using this function, if the MCON menu is set

as MAST, then the ﬁxture will transfer the DIM val-

ues to other ﬁxtures.

• When DMX data is received at the ﬁxture, it will

automatically return to main menu after 2 minutes

of no key operation.

RUN MODE

• RUN: This menu allows the user to select the op-

erating mode of the ﬁxture. Select DMX for nor-

mal DMX operation or SLAV for slave operation.

DMX ADDRESS

• ADDR: This menu allows the user to select the

startaddressoftheﬁxture.Use<UP>or<DOWN>

keys to select required start address.

MOTOR RESET (MOTR)

• Press ENTER to enter <MOTR>

• Press UP/DOWN and select <YES> or <NO>

• When you select <YES> and press ENTER, the

motor will be reset to origin.

• When you select <NO>, and press ENTER, no control.

FRESNELED MAX

ENGLISH VERSION

• SET: This menu allows the user to adjust key op-

eration settings for this ﬁxture. KEY: Select <ON>

for automatic lock-out. Password to re-enter the

display is <UP>+<DOWN>+<UP>+<DOWN>.

• Select <DIM1>, <DIM2>, <DIM3> or <DIM4>

for diﬀerent dimming speeds. <DIM4> is the slow-

est dimming speed).

• CURV: allows the user to adjust the shape of the

dimming curve. See the CURV chart to under-

stand more about actual dimming curves.

• In order to reset custom modes to default values

select <REST>.

• PERS this setting allows the user to select the

DMX personality of the ﬁxture. Refer to DMX per-

sonality charts for speciﬁc details.

• SLCK is used to lock the settings menu. When

SLCK is set to <ON> then user must insert pass-

code (UP+DOWN+UP+DOWN) in order to ac-

cess the settings menu.

• DERR Chosose <SAVE> in order to save the last

DMX data incase of DMX signal error. Choose

<BLACK> in order to blackout in case of DMX signal error.

• <ZOOM> is for setting zoom, press UP/DOWN to

select. <BASE> is standard setting; <POS1> is

zoom setting 1; <POS2> is zoom setting 2. Press

MENUtogetback,andtheSettingis savedautomatically.

• PERF: this setting allows the user to select the

performance characteristics of the ﬁxture.

• MCON: This function allows the user to select

whether the ﬁxture will send DMX data to other

ﬁxturesduringstand-aloneoperation.The<MAST>

setting allows data to be sent to Other ﬁxtures.

The<SELF>settingisdefaultandwillnotsendDMX

data to other ﬁxtures.

SPECIAL SETTINGS

FRESNELED MAX

ENGLISH VERSION

CURV Dimming

WHITES CALIBRATION (CAL)

• Enter the <CAL> to select white color of diﬀerent

color temperature.

• Select the <ZOOM> range. <POS1> & <POS2> set the

small position for the zoom function. Note that when

using DMX to control the ﬁxture, the user will only be

able to access up to the set ZOOM position. It is not

possible to adjust beyond the set position.

FRESNELED MAX

ENGLISH VERSION

5. USING A DMX512 CONTROLLER

CHANNEL ASSIGNMENT

NOTES:

• This product have two DMX512 channel conﬁgura-

tion: <UNO> / <DOS> / <STD.P>

Tabla de contenidos

Idiomas:

Otros manuales de Equipo de DJ de TECshow

TECshow

TECshow Quatrobeam Move Manual de usuario

TECshow

TECshow ALFIE HEX Manual de usuario

TECshow

TECshow SPINNER Manual de usuario

TECshow

TECshow BEAMER 17R Manual de usuario

TECshow

TECshow Pinspot LED Bar Manual de usuario

TECshow

TECshow BLINDER LITE Manual de usuario

TECshow

TECshow FLATSIX Manual de usuario

TECshow

TECshow DUALTEC 3-IN-1 Manual de usuario

TECshow

TECshow FLOWERTEC 2 Manual de usuario

TECshow

TECshow chromatec Manual de usuario

TECshow

TECshow HALO 80 LED Manual de usuario

TECshow

TECshow ALFIE WASH BM Manual de usuario

TECshow

TECshow MadBox XL 3-in-1 Manual de usuario

TECshow

TECshow COSMO UV Manual de usuario

TECshow

TECshow Bubble Master 2 Manual de usuario

TECshow

TECshow UV FLOOD 30 Manual de usuario

TECshow

TECshow FRESNELED 3100 MKII Manual de usuario

TECshow

TECshow HALO 100 SPOT Manual de usuario

TECshow

TECshow HALO 60 SPOT Manual de usuario

TECshow

TECshow ALFIE SPOT 2 Manual de usuario

TECshow

TECshow bangtec Manual de usuario

TECshow

TECshow MasterPAR Manual de usuario

TECshow

TECshow ALFIE XL Manual de usuario

TECshow

TECshow StickTriTEC Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario