Functoion
UART Communication
Bluetooth communication
LED indicator
Sound indicator
RFID reader
Network communication
Unlock
Charging
Firmware updates
Motion detection
Positioning
The TL85 has a built-in acceleration sensor that detects movement.
It is used for detecting unauthorised movement (theft)
Description
For communication with cabled peripheral devices
Supports unlocking, debugging mode, iBeacon detection, OTA
upgrade
The dierent states of the lock are indicated by the LED indicator
on the side of the lock
The lock has a built-in buzzer
Supports ISO14443-A, ISO14443-B, MIFARE standards
The TL85 uses the network connection to exchange information
(unlock instruciton, report location, battery power status, riding
status,, ...) with the server
RFID unlocking via RFID, network and Bluetooth
Charge the TL85 with the supplied magnetic charging cable or
hook up a Tec-Lock solar panel or an external 5V power supply to
the external connector
The firmware can updated over-the-air via the network connection
or locally via Bluetooth
It can be set in single positioning and continuous positioning
mode.
Supports GPS, GLONASS, BD, and A-GNSS
05
Function Description
