TechVision PDS8E2W2-I/A Manual de usuario
8MP 4K IP Motorized Dome
PDS8E2W2-I/A
Notes on Safety
Notes
This product is intended to be supplied by a Listed Power Unit, marked with 'Limited
Power Source', 'LPS' on unit, output rated minimum 12V/2 A or POE 48V/ 350mA or
AC24V (depending on models), no more than 2000m altitude of operation and Tma=60
Deg.C.
As for the modes with PoE function, the function of the ITE being investigated to IEC
60950-1 standard is considered not likely to require connection to an Ethernet network
with outside plant routing, including campus environment and the ITE is to be
connected only to PoE networks without routing to the outside plant.
Do not attempt to disassemble the camera; in order to prevent electric shock, do not
remove screws or covers.
There are no user-serviceable parts inside. Please contact the nearest service center as
soon as possible if there is any failure.
Avoid from incorrect operation, shock vibration, heavy pressing which can cause
damage to product.
Do not use corrosive detergent to clean main body of the camera. If necessary, please
use soft dry cloth to wipe dirt; for hard contamination, use neutral detergent. Any
cleanser for high grade furniture is applicable.
Avoid aiming the camera directly towards extremely bright objects, such as, sun, as this
may damage the image sensor.
Please follow the instructions to install the camera. Do not reverse the camera, or the
reversing image will be received.
Do not operate it in case temperature, humidity and power supply are beyond the limited
stipulations.
Keep away from heat sources such as radiators, heat registers, stove, etc.
Do not expose the product to the direct airflow from an air conditioner.
This manual is for using and managing the product. We may reserve the rights of
amending the typographical errors, inconsistencies with the latest version, software
upgrades and product improvements, interpretation and modification. These changes
will be published in the latest version without special notification.
All pictures, charts, images in this manual are only for description and explanation of
our products. The ownerships of trademarks, logos and other intellectual properties
related to Microsoft, Apple and Google belong to the above-mentioned companies.
This manual is suitable for face detection network cameras.
Disclaimer
With regard to the product with internet access, the use of product shall be wholly at
your own risks. Our company shall be irresponsible for abnormal operation, privacy
leakage or other damages resulting from cyber attack, hacker attack, virus inspection, or
other internet security risks; however, Our company will provide timely technical
support if necessary.
Surveillance laws vary from country to country. Check all laws in your local region
before using this product for surveillance purposes. We shall not take the responsibility
for any consequences resulting from illegal operations.
Regulatory Information
FCC Marking
The products have be tested and found in compliance with the council FCC rules and regulations
part 15 subpart B. Operation of this product is subject the following two conditions: (1) this device may
not cause harmful interface, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
CE Marking
The products have been manufactured to comply with the following directives.
EMC Directive 2014/30/EU
RoHS Marking
The products have designed and manufactured in accordance with Directive EU RoHS Directive
2011/65/EU and its amendment Directive EU 2015/863 on the restriction of the use of certain hazardous
substances in electrical and electronic equipment.
Table of Contents
1Introduction ...................................................................................................................1
2Network Connection......................................................................................................2
2.1 LAN................................................................................................................................................ 2
2.1.1 Access through IP-Tool .................................................................................................. 2
2.1.2 Direct Access through IE................................................................................................ 4
2.2 WAN............................................................................................................................................... 5
3Live View........................................................................................................................8
4Network Camera Configuration.................................................................................11
4.1 System Configuration.................................................................................................................... 11
4.1.1 Basic Information......................................................................................................... 11
4.1.2 Date and Time.............................................................................................................. 11
4.1.3 Local Config................................................................................................................. 12
4.1.4 Storage.......................................................................................................................... 12
4.2 Image Configuration ..................................................................................................................... 14
4.2.1 Display Configuration .................................................................................................. 14
4.2.2 Video / Audio Configuration........................................................................................ 16
4.2.3 OSD Configuration....................................................................................................... 18
4.2.4 Video Mask.................................................................................................................. 18
4.2.5 ROI Configuration........................................................................................................ 19
4.2.6 Lens Control................................................................................................................. 20
4.3 PTZ Configuration........................................................................................................................ 21
4.4 Alarm Configuration..................................................................................................................... 21
4.4.1 Motion Detection.......................................................................................................... 21
4.4.2 Other Alarms................................................................................................................ 23
4.4.3 Alarm In ....................................................................................................................... 25
4.4.4 Alarm Out..................................................................................................................... 25
4.4.5 Alarm Server ................................................................................................................ 27
4.5 Event Configuration (Optional)..................................................................................................... 27
4.5.1 Object Removal............................................................................................................ 27
4.5.2 Exception...................................................................................................................... 29
4.5.3 Line Crossing ............................................................................................................... 31
4.5.4 Intrusion ....................................................................................................................... 33
4.5.5 Crowd Density Detection.............................................................................................. 35
4.5.6 People Intrusion............................................................................................................ 37
4.5.7 People Counting ........................................................................................................... 38
4.5.8 Face Detection.............................................................................................................. 41
4.6 Network Configuration ................................................................................................................. 43
4.6.1 TCP/IP.......................................................................................................................... 43
4.6.2 Port............................................................................................................................... 44
4.6.3 Server Configuration .................................................................................................... 45
Network Camera User Manual
4.6.4 DDNS........................................................................................................................... 45
4.6.5 SNMP........................................................................................................................... 46
4.6.6 802.1x........................................................................................................................... 47
4.6.7 RTSP ............................................................................................................................ 48
4.6.8 UPNP ........................................................................................................................... 49
4.6.9 Email............................................................................................................................ 50
4.6.10 FTP............................................................................................................................... 51
4.6.11 HTTPS.......................................................................................................................... 51
4.6.12 P2P (Optional).............................................................................................................. 53
4.6.13 QoS............................................................................................................................... 53
4.7 Security Configuration.................................................................................................................. 53
4.7.1 User Configuration....................................................................................................... 53
4.7.2 Online User .................................................................................................................. 55
4.7.3 Block and Allow Lists .................................................................................................. 55
4.7.4 Security Management................................................................................................... 55
4.8 Maintenance Configuration........................................................................................................... 56
4.8.1 Backup and Restore...................................................................................................... 56
4.8.2 Reboot.......................................................................................................................... 56
4.8.3 Upgrade........................................................................................................................ 57
4.8.4 Operation Log............................................................................................................... 57
5Search ...........................................................................................................................58
5.1 Image Search................................................................................................................................. 58
5.2 Video Search................................................................................................................................. 60
5.2.1 Local Video Search....................................................................................................... 60
5.2.2 SD Card Video Search.................................................................................................. 61
Appendix................................................................................................................................64
Appendix 1 Troubleshooting ................................................................................................64
1
Network Camera User Manual
1Introduction
This IP-CAMERA (short for IP-CAM) is designed for high performance CCTV solutions. It
adopts state of the art video processing chips, integrated with the most advanced technologies
(like video encoding and decoding technology) to make the image transmission more stable
and smooth. Moreover, the built-in WEB server of this series improves the performance of the
traditional surveillance system so that users can be easy to operate and monitor. Therefore,
this series of product can be widely used in banks, telecommunication systems, electricity
power departments, law systems, factories, storehouses, uptowns, etc. In addition, it is also an
ideal choice for surveillance sites with middle or high risks.
Main Features
ICR auto switch, true day/night
3D DNR, digital WDR, ROI coding
Support BLC, HLC, Defog, Anti-flicker
Support mobile surveillance by smart phones with iOS or Android OS
Support face detection
Surveillance Application
2
Network Camera User Manual
2Network Connection
Connect IP-CAM via LAN or WAN. Here only take IE browser for example. The details are
as follows:
2.1 LAN
In LAN, there are two ways to access IP-CAM: 1. access through IP-Tool; 2. direct access
through IE browser.
2.1.1 Access through IP-Tool
Network connection:
①Make sure the PC and IP-Cam are connected to the LAN and the IP-Tool is installed in the
PC from the CD.
②Double click the IP-Tool icon on the desktop to run this software as shown below:
③Modify the IP address. The default IP address of this camera is 192.168.226.201. Click the
information of the camera listed in the above table to show the network information on the
right hand. Modify the IP address and gateway of the camera and make sure its network
address is in the same local network segment as the computer’s. Please modify the IP address
of your device according to the practical situation.
3
Network Camera User Manual
For example, the IP address of your computer is 192.168.1.4. So the IP address of the camera
shall be changed to 192.168.1.X. After modification, please enter the password of the
administrator and click “Modify” to modify the settings.
④Double click the IP address and then the system will pop up the IE browser to connect
IP-CAM. Follow directions to download, install and run the Active X control.
Enter the username and password in the login window to log in.
The default password of the administrator is “123456”.
The default username is “admin”; the default password is “123456”.
4
Network Camera User Manual
The system will prompt the above-mentioned textbox to ask you to change the default
password. It is strongly recommended to change the default password for account security. If
“Do not show again”is checked, the textbox will not be prompted next time.
2.1.2 Direct Access through IE
The default network settings are as shown below:
IP address: 192.168.226.201
Subnet Mask: 255.255.255.0
Gateway: 192.168.226.1
HTTP: 80
Data port: 9008
Use the above default settings when logging in the camera for the first time. Directly connect
the camera to the computer through network cable.
①Manually set the IP address of the PC and the network segment should be as the same as
the default settings of the IP camera. Open the network and share center. Click “Local Area
Connection” to pop up the following window.
Select “Properties” and then select internet protocol according to the actual situation (for
example: IPv4). Next, click the “Properties” button to set the network of the PC.
5
Network Camera User Manual
②Open the IE browser and enter the default address of IP-CAM and confirm.
③Follow directions to download and install the Active X control.
④Enter the default username and password in the login window and then enter to view.
2.2 WAN
Access through the router or virtual server
①Make sure the camera is connected to the local network and then log in the camera via
LAN and go to ConfigNetworkPort menu to set the port number.
Port Setup
②Go to Config NetworkTCP/IP menu to modify the IP address.
Tabla de contenidos
Otros manuales de Cámara de seguridad de TechVision
TechVision
TechVision PBS2L1W2-2 Manual de usuario
TechVision
TechVision HDE5P2W2-S Manual de usuario
TechVision
TechVision PBS8P3WZ-I/A Manual de usuario
TechVision
TechVision PDS8P3WZ-I/A Manual de usuario
TechVision
TechVision PVS5P1W2-I/A Manual de usuario
TechVision
TechVision HBE5P4WZ-S/A Manual de usuario
TechVision
TechVision HDE2P2W2-S Manual de usuario
TechVision
TechVision PDE4L3WZ-I Manual de usuario
TechVision
TechVision PAS5P1W2-I/A Manual de usuario
TechVision
TechVision ID-S2LIR100W2 Manual de usuario
