TechniSat DIGITRADIO 306 Manual de usuario

Instruction Manual

DIGITRADIO 306

DAB+ / FM / Radio



SAFETY PRECAUTIONS



-Read all the instructions carefully before using the unit and keep them for future reference.

-Check that the voltage marked on the rating label matches your mains voltage.

-The unit must be placed on a flat stable surface and should not be subjected to vibrations.

-Do not place the unit on sloped or unstable surfaces as the unit may fall off or tip over.

-The mains socket must be located near the unit and should be easily accessible.

-Avoid extreme degrees of temperature, either hot or cold. Place the unit well away from heat sources such as

radiators or gas/electric fires. Avoid exposure to direct sunlight and other sources of heat.

-Never place any type of candle or naked flame on the top of or near the unit.

-To reduce the risk of fire, electric shock or product damage, do not expose this unit to rain, moisture, dripping or

splashing. No objects filled with liquids, such as vases, should be placed on the unit.

-If you spill any liquid into the unit, it can cause serious damage. Switch it off at the mains immediately. Withdraw

the mains plug and consult your dealer.

-To prevent the risk of electric shock or fire hazard due to overheating, ensure that curtains and other materials

do not obstruct the ventilation vents.

-Do not install or place this unit in a bookcase, built-in cabinet or in another conned space, ensure that a

minimum of 10cm should be kept around the apparatus for ventilation.



Safety

-Always disconnect the unit from the mains supply before connecting/disconnecting other devices or moving

the unit.

-Unplug the unit from the mains socket during a lightning storm.

-This unit will become warm when used for a long period of time. This is normal and does not indicate a problem

with the unit.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN



The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user

to the presence of uninsulated “dangerous voltage” within the unit’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock.



The exclamation point within an equilateral triangle is intended to alert the user to the presence of

important operating and maintenance (servicing) instructions in the manual accompanying the unit.



Mains Adapter

-Make sure the unit is not resting on top of the mains adapter cable, as the weight of the unit may damage the

mains cable and create a safety hazard.

-If the mains adapter is damaged it must be replaced by the manufacturer, its service agent, or similarly qualied

persons in order to avoid a hazard.

Interference

-Do not place the unit on or near appliances which may cause electromagnetic interference. If you do, it may

adversely affect the operating performance of the unit, and cause a distorted sound.

Supervision

-Children should be supervised to ensure that they do not play with the unit.

-Never let anyone especially children push anything into the holes, slots or any other openings in the case - this

could result in a fatal electric shock.

Service/Maintenance

-To reduce the risk of electric shock, do not remove screws. The unit does not contain any user serviceable parts.

Please leave all maintenance work to qualified personnel.

-Do not open any fixed covers as this may expose dangerous voltages.

-Ensure to unplug the unit from the mains socket before cleaning.

-Do not use any type of abrasive pad or abrasive cleaning solutions as these may damage the unit's surface.

-Do not use liquids to clean the unit.



product overview



Front View



1. Display

2. MENU/INFO Button

3. TUNE Button

4. STANDBY Button

5. MODE Button

6. VOLUME/SELECT Knob

7. ALARM Button

8. DIMMER/SNOOZE Button

9. PRESET Button

10. SLEEP Button



Rear View



11. Rod Antenna

12. Earphones Jack

13. AUX IN Jack

14. DC Input Socket



GETTING START



Powering ON/OFF

When you first connect the unit to the mains adapter cable, the unit will be in standby mode after

showing “Welcome to Digital Radio” (F.1)(F.2)

1. Press the Standby button to switch the unit on.

2. Press the Standby button to switch the unit back to standby mode.

F.1



Selecting Modes

Press the MODE button repeatedly to switch between FM, Auxiliary Input and DAB modes.



Navigating the Menu

1. Press and hold the MENU/INFO to access the menu.

2. Turn the VOLUME/SELECT Knob to select your choice.

3. Press the same knob to confirm your selection.



System Settings



Press and hold the MENU/INFO button to display the menu. Turn the VOLUME/SELECT Knob to

select System and then press the same knob to confirm.



Time

The Time can be automatically set once it has been received DAB+ or FM radio station with time

information. You may also adjust the Time manually.

During System mode, turn the VOLUME/SELECT Knob to select Time and press the same knob

to confirm. Turn the VOLUME/SELECT Knob to select Set Time/Date and press the same knob to

confirm.



1. The hour digits will flash on the display.

2. Turn the VOLUME/SELECT Knob to adjust the hour and then press the same knob to confirm.

3. Repeat above Step (2) to set the Minute/Date/ Month/Year.

4. The time and date settings are now complete.



For the other settings under Time, turn the VOLUME/SELECT Knob to select from the following

options and then press the same knob to confirm.



Auto update Update from Any / DAB / FM.

Set 12/24 hour Set 12 / 24 hour format.

Set date format DD-MM-YYYY or MM-DD-YYYY



Language

1. During System mode, turn the VOLUME/SELECT Knob to select Language and then press the

same knob to confirm.

2. Turn the VOLUME/SELECT Knob to change the display language of your choice.

3. Press the same knob to confirm.



Factory Reset

There may be times when you need to reset your unit back to the factory settings especially when

you have moved house. If you experience reception problems you may want to reset and try again.

If you move to another part of the country and pick up the local and national DAB+ stations in that

area, your previously tuned channels may no longer be available.



1. During System mode, turn the VOLUME/SELECT Knob to select “Factory reset”, and press the

same knob to confirm. (F.3)

2. Turn the VOLUME/SELECT Knob to select <Yes>, and press the same knob to confirm or select

<No> to cancel. (F.4)

F.3

F.4



SW version

1. During System mode, turn the VOLUME/SELECT Knob to select SW version and then press the

same knob to confirm.

2. The software version will show on the display.



Sleep

This function allows you to program the unit to turn to standby mode by itself after a set period of

time.

1. During System mode, turn the VOLUME/SELECT Knob to select Sleep and then press the same

knob to confirm.

2. Turn the VOLUME/SELECT Knob to change the sleep time from: Sleep Off /10/20/30/60/70/80/90

minutes.

3. Press the same knob to confirm.

Alternatively,

Press the SLEEP button repeatedly to set the sleep time from: Sleep Off /10/20/30/60/70/80/90

minutes.



DAB Operation



Press the MODE button repeatedly to select DAB. The unit will enter DAB mode and perform the

auto scan function. During the scan the display will show “Scanning… ” together with a slide bar that

indicates the progress of the scan and the amount of stations that have been found so far. Once the

scan has finished, the unit will select the first alpha numerically found station.

To explore the found stations, turn the VOLUME/SELECT Knob to select and press the same knob to

confirm.



Station List

1. During DAB mode, press the TUNE button to enter Station list.

2. Turn the VOLUME/SELECT Knob to explore the found DAB+ stations and then press the same

knob to confirm.



Full scan

Press and hold MENU/INFO button, and then turn the VOLUME/SELECT Knob to select Full scan.

Press the same knob to confirm.

1. The display will show “Scanning…” and a progress slide bar.

2. All the stations that have been found will be stored automatically. To explore and listen to the

found stations, turn the VOLUME/SELECT Knob to select and press the same knob to confirm.



Manual tune

As well as the full scan function, you can manually tune the receiver. This can help you when aligning

your aerial or when adding stations that were missed while auto tuning.

1. Press and hold MENU/INFO button.

2. Turn the VOLUME/SELECT Knob to select “Manual tune”, and press the same knob to confirm.

3. The display will show the multiplex 5A to 13F.

4. Turn the VOLUME/SELECT Knob to select the channel, and press the same knob to confirm.



DAB Display Modes

Every time you press the MENU/INFO button, the display will show the following display modes:

DLS – Signal Strength – Programme Type – Ensemble – Frequency – Signal error – Bit Rate –

Time – Date



Prune Invalid

You may remove all unavailable stations from the list.

1. During DAB mode, press and hold the MENU/INFO button and turn the VOLUME/SELECT Knob

to select Prune and Press Same knob to confirm.

2. Turn the VOLUME/SELECT Knob to select <YES> and press the same knob to confirm or select

<NO> to cancel.



Preset Stations

This function allows up to 10 stations to be programmed into the memory and stored in both DAB

and FM mode.

1. Select your desired station, press and hold the PRESET button until the display shows "Preset

Store <#: (Empty) >".



2. Turn the VOLUME/SELECT Knob to select preset number and press the same knob to confirm.



Recalling a Stored Station

1. To select a preset, press the PRESET button, and then turn the VOLUME/SELECT Knob to select

one of the listed preset stations.

2. Press the same knob to confirm the selection.



Operation of Preset and Recall stations are same for DAB and FM.



FM Operation



Switching from DAB to FM Mode

To switch the unit to FM mode, press the MODE button repeatedly to switch to FM mode. The display

will show the frequency.



Auto Scan

1. During FM mode, press the TUNE button to enter <Tuning>.

2. If briefly turn the knob at clockwise, Press the Volume/Select knob it will auto search up.

3. If briefly turn the knob at counter clockwise, Press the Volume/Select knob it auto search down.

4. Once a station has been found, the scanning will stop automatically.



The search may not stop at a station with a very week signal.



Manual Tuning

To search for FM stations manually, press the TUNE button to enter <Tuning>, and turn the

VOLUME/SELECT Knob until your desired frequency is reached.



With FM radio, it may be necessary to fine tune each station by turning the Volume

+/- dial repeatedly. Each turn will adjust the frequency by 0.05 MHz. If reception

is still poor, adjust the position of the aerial or try moving the radio to another

location.



FM Display Modes

Every time you press the MENU/INFO button, the display will show the following display modes:

Radio Text - Programme Type - Frequency - Audio Type - Time - Date



Scan setting

1. Press and hold the MENU/INFO button to access FM menu.

2. Turn the VOLUME/SELECT Knob to select “Scan setting” and then press the same knob to

confirm.

3. Turn the VOLUME/SELECT Knob to select “Strong stations only” or “All stations” and then press

the same knob to confirm.



Audio setting

1. Press and hold the MENU/INFO button to access FM menu.

2. Turn the VOLUME/SELECT Knob to select “Audio setting” and then press the same knob to

confirm.

3. Turn the VOLUME/SELECT Knob to select “Stereo allowed” or “Forced mono” and then press the

same knob to confirm.



AUX operation



There is an “AUX IN” socket located at the back of the unit. Analogue audio sound signals from other

sources can be input to the unit through this socket.

1. Connect the input to another audio device via an AUX

cable (not included) with an “AUX IN” socket.

2. Press the MODE button repeatedly to select “Auxiliary

Input” mode. (F.5)

3. Turn the VOLUME/SELECT Knob to adjust the volume

control for your desired sound output level.

4. In AUX mode, operate your audio device directly for

playback features.



Setting the Alarm



This function allows you to program 2 individual Alarm in

a set period of time.

Press the ALARM button once or twice to select the Alarm

number (1 or 2) and then press Same knob to start the

setting of the alarm. (F.6)



Turn the VOLUME/SELECT Knob to select then press the

same knob to confirm.

F.5



F.6



On time Alarm On time ##:##

Duration 15/30/45/60/90

Source Buzzer/DAB/FM (DAB/FM: Last listened / Preset station)

Enable Once/Weekends/Weekdays/Daily

Volume

Volume Bar

Alarm On / Off



When the alarm is set, the alarm icon will appear on the display. To turn off the alarm when it sounds,

press the Standby or ALARM button.

During Standby mode, press the ALARM button repeatedly to turn the saved Alarm on or off. (F.7)



Snooze



Snooze allows you to temporarily silence a sounding alarm. The radio returns to standby for the set

time period with Snooze countdown displayed. When the countdown reaches 0(zero) the alarm

triggered again.

1. When the alarm is sounding, press the DIMMER/SNOOZE button once.

2. You can change the snooze period by repeatedly pressing the DIMMER/SNOOZE button, Snooze

periods are 5,10, 15 or 30 minutes.



Dimmer



The display has a dimmer setting with four brightness - Off / Low / Medium / High. You can press the

DIMMER/SNOOZE button repeatedly to switch the dimmer level.



Headphones (Not included)



A headphone jack has been provided so that the radio can be used without disturbing others. Plug in

the headphones at the point marked and adjust the listening volume to your chosen level.

Excessive sound pressure from earphones and headphones can cause hearing loss. The speakers will

not operate when earphones are fitted.



Specification



Rated voltage (Adapter): AC 100-240V ~50/60Hz

Adaptor output: DC 9V 1.6A

Power consumption : 14.5W

Audio output : 1 X 5W RMS

Frequency Range : DAB 174-240MHz

FM 87.5-108MHz

Unit dimension : 221 mm (W) x 159 mm (D) x 137 mm (H)

Weight : ~1.3 kg



***SPECIFICATION SUBJECT TO CHANGE WITHOUT FURTHER NOTICE.***

Tabla de contenidos

Otros manuales de Radio de TechniSat

TechniSat

TechniSat DigitRadio 250 Manual de usuario

TechniSat

TechniSat MULTYRADIO 600 CD IR Manual de usuario

TechniSat

TechniSat DigitRadio 225 Manual de usuario

TechniSat

TechniSat VIOLA 2 C IR Manual de usuario

TechniSat

TechniSat DIGITRADIO 602 Manual de usuario

TechniSat

TechniSat TECHNIRadio 2 Manual de usuario

TechniSat

TechniSat DIGITRADIO 586 Manual de usuario

TechniSat

TechniSat TECHNIRADIO 6 IR Manual de usuario

TechniSat

TechniSat DIGITRADIO 30 Manual de usuario

TechniSat

TechniSat DIGITRADIO 570 CD IR Manual de usuario

TechniSat

TechniSat DigitRadio 80 Manual de usuario

TechniSat

TechniSat AUDIOMASTER MR1 Manual de usuario

TechniSat

TechniSat TECHNIRADIO 5 IR Manual de usuario

TechniSat

TechniSat TECHNIRADIO SOLAR Manual de usuario

TechniSat

TechniSat TECHNIRADIO RDR Manual de usuario

TechniSat

TechniSat DIGITRADIO 3 Manual de usuario

TechniSat

TechniSat DIGITRADIO 580 Manual de usuario

TechniSat

TechniSat DIGITRADIO 231 OD Manual de usuario

TechniSat

TechniSat DigitRadio 370 CD BT Nero Manual de usuario

TechniSat

TechniSat DIGITRADIO 10 C Manual de usuario

TechniSat

TechniSat DIGITRADIO 20 Manual de usuario

TechniSat

TechniSat DIGITRADIO 580 Manual de usuario

TechniSat

TechniSat DIGITRADIO 600 Manual de usuario

TechniSat

TechniSat DIGITRADIO 585 Manual de usuario

Manuales populares de Radio de otras marcas

EisSound

EisSound KBSound iSelect Manual de usuario

Midland

Midland 1001LWX Manual de usuario

Konig

Konig HAV-SR41 Manual de usuario

Roberts

Roberts exprssion Manual de usuario

VDigi

VDigi DD3.0 Manual de usuario

Radio Shack

Radio Shack 21-1863 Manual de usuario

Roberts

Roberts Stream 207 Manual de usuario

Sony

Sony Walkman SRF-M97 Manual de usuario

Stanley

Stanley FatMax FMC770 Manual de usuario

auna

auna DAB-Radio 10026947 Manual de usuario

SOUNDMASTER

SOUNDMASTER UR190 Manual de usuario

HYT

HYT TC-320 Manual de usuario

auna multimedia

auna multimedia Yellowstone 10026851 Manual de usuario

B-Tech

B-Tech GMRS-V2 Manual de usuario

Weierwei

Weierwei VEV-V8 Manual de usuario

SOUNDMASTER

SOUNDMASTER DAB750 Manual de usuario

Telefunken

Telefunken TF-1505 Manual de usuario

Makita

Makita LXRM03 Manual de usuario