Techko AUTOTECH HAF080 Manual de usuario

80 Sheet Cross Cut Shredder

Before operating this unit, please read all of

the instructions, including important

warranty information.

HOME/ OFFICE SHREDDER

OPERATION INSTRUCTIONS

AUTOTECH Model: AF080

Customer Service :

1-888-8TECHKO (1-888-883-2456)

Website: www.techkomaid.com

Mfg. By

9767 Research Drive

Irvine, CA 92618-4626

MADE IN CHINA

AUTOTECH Technology:

Auto feed shredder

USA Patent No. 5,975,445

No. 6,390,397

No. DES 536,728

Important Warranty Information:

This shredder is covered through TECHKO by a one- (1) year limited

warranty. A dated proof of purchase is required for warranty service.

TECHKO warranties this product for a period of one (1) year from the

original date of purchase against defects in design, assembly, material,

and workmanship. TECHKO will replace the unit with an equivalent

product free of charge other than postage requirements. TECHKO will not

be responsible for freight or insurance costs in receiving the defective

shredder to its location.

Warranty Procedures:

Before sending in your shredder for replacement, please contact our

Customer Service Department for troubleshooting.

For warranty replacement, please pack the shredder securely in a box.

Please include the following inside the box:

1. Your name and/or the company name

2. Phone number where you can be reached during normal business hours

3. Return shipping address including suite or apartment number. Please

no P. O. Bo xes

4. Model number

5. Copy of a dated receipt

6. Anote stating the nature of the return

7. $10.00 check or money order for return shipping and handling fee.

Ship the box to the provided address on this manual. Upon receipt of the

shredder, TECHKO will ship a new unit to you. Please allow 12-16 working

days for the warranty process.

SHREDDER

This TECHKO shredder features a Master Control Switch on the side of the

unit, and Forward/Auto, On/Off, Reverse buttons located on the head of the

shredder.

This shredder is designed to AUTO FEED and cross cut shred 3-5 sheets at a

time when loading a maximum of 80 sheets in the tray. There are four LED lights

built into the unit. The "Power " light indicates that the shredder is on and ready

to use. The "Basket Full" light indicates that the basket is at full capacity and the

unit will stop automatically for you to empty. The "Overheat" light indicates that

the cycle time has been exceeded. The "Overload" light indicates that the

shredder has exceeded the maximum sheet capacity. Please see operation

instructions for more information.

SAFETY INSTRUCTIONS/WARNINGS

Your safety as well as the safety of others is important to TECHKO. In this

manual and on the product are important safety instructions. PLEASE READ ALL

OF THE SAFETY INSTRUCTIONS CAREFULLY BEFORE OPERATING. If you

have questions regarding the operation of your shredder, please call customer

service prior to operation.

CAUTION!

Before using your shredder, be sure to observe the following precautions:

1. Keep children and pets away from the shredder. Serious injury could occur.

2. Always follow all warnings and instructions outlined in this manual, on the

shredder, and on the shredder packaging.

3. Never insert your hands or fingers into the shredder feed slot(s). Keep

personal and loose objects such as jewelry, hair, neck ties, etc, away from the

feed slots. Never put your face near the shredder while the unit is plugged in.

Serious injury could occur.

4.This product is intended to shred paper, credit cards, CDs, and DVDs only. Do

not shred paper clips or other hard materials. Do not shred labels or

envelopes. Doing so will damage the cutting system.

5.This shredder is not designed for heavy commercial usage. Do not exceed the

recommended shred capacity. Do not operate for extended periods of time.

6. IMPORTANT-Always unplug the shredder when it's not in use and also prior to

cleaning, moving, servicing or any action other than normal operation.

7. This shredder should never be placed near or over a radiator, heat register, or

water.

8. The power supply cord serves as the disconnect function for the shredder. Do

not operate with a damaged power supply cord.

5. The "Basket Full" light indicates that the basket is at full capacity. The

unit will stop automatically and you must clear the basket.

6. The "Overheat" light indicates that the cycle time has been exceeded. The

shredder will automatically shut down until it is safe to resume shredding.

Cycle time:30 minutes.

7. Auto Reverse: When too much paper is loaded at once, the motor will stop

and automatically reverse for a short period. You will need to pull the paper

out from the paper feeding slot! Once out, turn the unit off and then turn the

unit back on to reset.

Forward/Auto On/Off Reverse

Power

AUTOTECH Model: AF080

Basket Full Overheat Overload

NO HAIR NO CHILD

NO AER OSOL

Forward/Auto On/Off Reverse

Power

AUTOTECH Model:AF080

Basket Full Overheat Overload

(Auto Reverse)

NO HAIR NO CHILD

NOAEROSOL

8. To use the Forward or Reverse Key/Buttons you need to keep the button

pressed down to continue the forward or Reverse function.

Forward/Auto On/Off Reverse

Power

AUTOTECH Model: AF080

Basket Full Overheat Overload

NO HAIR NO CHILD

NO AER OSOL

Forward/Auto On/Off Reverse

Power

AUTOTECH Model:AF080

BasketFull Overheat Overload

(AutoReverse)

NO HAIR NOCHILD

NOAEROSOL

NO AEROSOL

NO TIE

NO HAIR

INSTALLATION

Paper Tray

Manual Feed Slot

CD Slot

Paper Loading Button

Operating Buttons

Forward/Auto On/Off Reverse

Power

AUTOTECH Model: AF080

BasketFull Overheat Overload

NOHAIR NOCHILD

NOAEROSOL

Safety Interlock Switch

CD Basket Master Control Switch

MAX. 80 SHEETS

Basket

CAUTION:

Be sure the shredder is securely in place before shredding. The machine will

not operate correctly. To prevent the possible risk of injury, NEVER leave the

shredder unattended while using the auto feed feature. Keep children away

from the shredder during use.

OPERATION

1. Shred capacity per load:

A: Auto Feed Shredding: 80 Sheets maximum of 20 lb paper

Multiple sheet pulling system pulls 3-5 sheets a at time.

B: Manual Feed Shredding: 8 Sheets maximum per pass of 20lb paper

C: Credit Card: 1 Pc. Maximum

CD/DVD: 1 Pc. Maximum

FORWARD/AUTO: Activates the continuous forward shredding function when trying

To clear the slots.

On/OFF: Turns off the and on shredder.

REVERSE: (In the event of a paper jam), reverses the shredding direction

and backs the items out of the shredder.

1. Plug shredder to power outlet, switch the master control switch to the

“on” position, and press the "ON/OFF" button. The "Power" indicator

Light will becomegreen. The shredder is now prepared to work.

2. Prepare paper to be shredded by removing staples, paper clips, labels

or other gummy matter. Load paper into the paper tray.

3. This shredder must be used with the supplied basket. The safety

interlock switch must be engaged, or the shredder will not operate.

4. Insert items to be shredded into the appropriate feed opening.

5. Push the PAPER LOADING BUTTON to load papers easily into the paper tray.

For best shredding results, occasionally clean the shredder paper guide

and blades, removing paper particles and debris. To do this, switch to

"Reverse" position and then forward. In some cases the shredder may have

to be unplugged, turned over and debris to be picked out to remove jammed

paper particles.

* ALWAYS UNPLUG THE SHREDDER BEFORE ATTEMPTING TO REMOVE AN

ITEM MANUALLY.

PRODUCT SPECIFICATIONS:

Auto Feed Horizontal Entry Width: 9.5" (241mm)

Manual Horizontal Entry Width: 8.75" (222mm)

Shred Size: 5/32" x 1-3/4"(4 x 45mm)

Shredding Speed: 8.7Fpm (3M/min)

Basket Capacity: 6.2 Gallons ( 23.7 Liters)

Power Source: 115V/60Hz (USA/ Canada)

220-240V/50Hz (Europe)

100V/60Hz (Japan)

Do not usecompressed air or spray any liquid into the shredder. Doing so

could result in injury and/or damage the shredder.

Always unplug the shredder before removing excess paper shreds/debris

from the head or before performing any other action other than normal

shredding. Always unplug the shredder while not in use in order to prevent

accidents.

Do not operate the unit with a damaged power supply cord.

Operate this shredder with a 30 minutes on, and a 20-30 minutes off cycle.

Avoid touching the document feed slots with your hands. Never insert hands

or fingers intothe feed slots.

Keep hair/face awayfrom the document feed slots.

Avoid clothing touching the document feed slots. Keep personal and loose

objects (jewelry, ties, etc.) away from feed slots.

Keep aerosol productsaway from shredder. Do not use flammable,

petroleum-based or aerosolcleaners on ornear this product. Some

agents may combustcausing serious injury.

Do not exceed the 80 sheet maximum capacity in the auto feet slot or the sheet

maximum in the hand feed slot.

If the paper is wider than the feed entry and is folded to fit, the paper thickness

increases and may exceed the recommended capacity.

If the basket is not pushed in all the way the shredder will not operate.

If the cycle time is exceeded the shredder will automatically shut down until it is

safe to resume shredding. Cycle time:30 minutes.

If the shredder is over loaded and jammed, a red light will flash and the shredder

will automatically reverse to pull the paper back out. Reduce the amount of

paper and feed it through again.

Do not shred envelopes, labels or paper with labels affixed to them. This will

gum up the cutting blades, cause the shredder to malfunction, and void your

warranty.

Please observe all printed precautions and warnings.

IMPORTANT NOTES

OPERATION DIAGRAM

1. To power theunit, turn theMaster Control

Switch to the"ON" position. This is located

on the sideof the unit. Then press the On/Off

button to the"ON" position to begin

shredding.

2. When usingthe auto feedtray, you must push

the paper loadingbutton and slide the paper

down into theslot.

Auto Feed Shredding: 80 Sheets maximum of

20 lb paperMultiple sheet pulling

system pulls 3-5sheets a attime.

3. Manual Feed Shredding:

8 Sheets maximumper pass

of 20lb paper

4. Credit Card: 1 Pc. Maximum

CD/DVD: 1 Pc. Maximum

9. Do not alter or deface the shredder or shredder housing in any way. Do not

attempt to service the shredder yourself. Opening and/or removing covers

could expose you to dangerous voltage points and/or other serious risks.

These actions will also void your warranty.

10. Always unplug the shredder from the wall outlet before cleaning. Clean the

outside of the shredder with a damp cloth only. Do Not immerse in water or

use household cleaners, lubricants, or alcohol on or near the shredder. Never

use any type of compressed air aerosols, or any product marked flammable to

clean the shredder. Some agents may combust causing serious injury. Using

a vacuum to suck excess debris from the throat or blades is acceptable.

11. Do not remove any warning stickers or labels from the shredder.

12. Only operate the shredder from a power source indicated on the marking

label. If you are unsure of the power source, consult your dealer or local

electric company.

13. Do not rest any objects on the power supply cord. Do not place the shredder

in an area where people may walk on or over the power supply cord.

14. If an extension cord is used, ensure that the total amperage ratings of the

products plugged into the extension cord do not exceed the extension cord

rating. Ensure that the total of all items plugged into the wall outlet does not

exceed fifteen (15) amperages.

15. This shredder should only be operated with an operator in attendance.

16. Empty the waste basket often for smooth trouble free operation.

17. The shredder should not be tilted more than 10 degrees while the shredder is

in operation.