Introduction
RFID reader WREM 82 MTM(VR) with wiegand output, reads media at 125 kHz (EM
Marin) & 13.56 MHz, (MIFARE®, NFC)) and is designed for connection to control
modules and door controllers of the APS mini Plus or APS 400 system, or to third party
controllers. The reader is equipped with a configurable WIEGAND data output usable
with most third party systems. The reader is delivered in MTMRFID module dedicated
for entry panel MTM. It contains two inputs (LED and buzzer control), as well as an
RS 485 interface for configuring the Wiegand output or fw update. In addition to
standard MIFARE®and MIFARE®DESFire®RFID cards or key fobs, the reader is
compatible with NFC-enabled mobile phones with Android 4.4 Kit Kat (or higher) and the
TECH FASS Mobile ID application, with which the mobile phone can be used for
identification (replaces usual RFID card).
a. Application
▪Access control system, booking system
▪Door access control, both-sided access control
▪Lift access control
b. Parameters
▪Input voltage 8 ÷ 28 Vdc
▪Typical current consumption 53 mA @ 12 V
▪Maximum input power 1,1 W
▪Reading ID media MIFARE®, NFC, EM Marin, Jablotron
▪1x RS 485 (update firmware, wiegand output format settings)
▪1x Wiegand output (length 24 –56 bits, MSB / LSB, reverse option)
▪2x Input (LED, buzzer control)
▪Integrated in module MTMRFID (entry panel MTM)
▪VR –antivandal option, black zamak alloy
c. Variants
Product variants in aluminium, silver color
