IDENTEC SOLUTIONS IPOINT Si Instrucciones de uso

IDENTEC SOLUTIONS

Model IDS1001

iPOINT Si

HARDWARE USER MANUAL

iPOINT – Hardware User Manual | 18.06.2020

Proprietary Notice

This document contains confidential information proprietary to IDENTEC SOLUTIONS and may not be used or

disclosed to other parties in whole or in part without the prior written authorization from IDENTEC SOLUTIONS.

Disclaimer and Limitation of Liability

IDENTEC SOLUTIONS AG and its affiliates, subsidiaries, officers, directors, employees and agents do not make

any express or implied warranties or representations with respect to such information including, without limitation,

warranties as to non-infringement, reliability, suitability for a particular purpose and accuracy. IDENTEC

SOLUTIONS shall not under any circumstances be liable to any person for any special, incidental, indirect or

consequential damages, including without limitation, damages resulting from use of or reliance on information

presented herein, or loss of profits or revenues or costs of replacement goods, even if informed in advance of the

possibility of such damages.

Trademarks

“IDENTEC SOLUTIONS”, “Intelligent Long Range”, “ILR” and the stylized “i” are registered trademarks.

“i-PORT”. “iPOINT” and “Visibility Delivered.” are trademarks of IDENTEC SOLUTIONS, Inc. and/or IDENTEC

SOLUTIONS AG.

No part of this document may be reproduced or transmitted in any form by any means, photographic, electronic,

mechanical or otherwise, or used in any information storage and retrieval system, without the prior written

permission of IDENTEC SOLUTIONS.

Issue 1.2 / May 2020 (MOM/FEK/SMEE)

Subject to alteration without prior notice.

Printed in Austria

iPOINT – Hardware User Manual | 18.06.2020

Radio Frequency Compliance Statement

IDENTEC SOLUTIONS is the responsible party for the compliance of the following devices:

MODEL: IDS1001 iPOINT Si

Region/Country Organization Marking

EUROPE: EU CE

USA: FCC FCC ID OO4-IDS1001

CANADA: IC 3538A-IDS1001

The user(s) of these products are cautioned to only use accessories and peripherals approved, in advance, by

IDENTEC SOLUTIONS. The use of accessories and peripherals, other than those approved by IDENTEC

SOLUTIONS, or unauthorized changes to approved products, may void the compliance of these products and result in

the loss of the user(s) authority to operate the equipment.

European Declaration of Conformity according to RED Directive

IDENTEC SOLUTIONS AG hereby declares that the device iPOINT is in conformity with the essential requirements

of Directive 2014/53/EU. The declaration of conformity can be found at: www.identecsolutions.com

Radio Frequency (RF) Exposure Compliance of Radio Communication Apparatus

To satisfy FCC and ISED RF Exposure requirements for mobile devices, a separation distance of 20 cm or more should be

maintained between the antenna of this device and persons during operation. To ensure compliance, operation at closer than

this distance is not recommended. This transmitter must not be co-located or operating in conjunction with any other antenna

or transmitter.

Conformité à l’exposition aux champs RF des équipements radio

Pour satisfaire aux exigences FCC et ISED concernant l'exposition aux champs RF pour les appareils mobile, une distance

de séparation de 20 cm ou plus doit être maintenu entre l'antenne de ce dispositif et les personnes pendant le

fonctionnement. Pour assurer la conformité, il est déconseillé d'utiliser cet équipement à une distance inférieure. Cet émetteur

ne doit pas être co-situé ou fonctionner conjointement avec une autre antenne ou un autre émetteur.

Canada Certification

Licence-Exempt Radio Apparatus (ISED)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic

Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1.This device may not cause interference.

2.This device must accept any interference, including interference that may cause undesired operation of the device.

Appareils radio exempts de licence (ISDE)

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation,

Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est

autorisée aux deux conditions suivantes :

1.L’appareil ne doit pas produire de brouillage;

2.L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre

le fonctionnement.

iPOINT – Hardware User Manual | 18.06.2020

WARNING - This product should be installed by personnel trained in installation of

equipment in industrial environments and meet the representative country’s

National Electrical Code.

Electrostatic Discharge

This product contains components that are sensitive to electrostatic discharges. Please observe

the special instructions for their protection. Incorrect handling can damage the unit and cause

the invalidation of the warranty.

Minimum safety precautions against electrostatic discharge:

 Establish earth contact before you touch the unit. (For example, touch the earthing screw on the unit.) Best

practice is to use an antistatic ribbon and earth yourself permanently for the time you handle the unit.

 Avoid unnecessary contact with the unit connectors and assemblies inside the unit.

 Only open the unit if the operational settings (as described in the manual) expressly requires it.

 Use antistatic tools for the setting of the unit. (Warning: Do not touch life-threatening voltages with these tools).

 Do not store unit and components without protective packaging.

 Remove unit and components from the packaging only prior to installation.

These notes are not sufficient to guarantee complete protection from electrostatic discharges! We

recommend the use of suitable protective equipment.

IDENTEC SOLUTIONS does not accept the return of products where the regulations concerning the ESD

precautions and protective packaging materials were not followed.

iPOINT – Hardware User Manual | 18.06.2020

Safety Instructions

The equipment can be installed in restricted areas.

The system described in this manual is for exclusive operation of trained employees. Only qualified personnel that

have knowledge of the potential dangers involved should perform the installation, settings, maintenance and repair

of the units used.

Operational Safety

The correct and safe use of these systems assumes that operating and service personnel follow the safety

measures described in the manual alongside the generally acceptable safety procedures.

If there is a possibility that safe operations cannot be guaranteed, the system must be switched off, secured against

accidental use and the service unit responsible immediately informed.

Safety Documents

The iPOINT was designed, tested and supplied in perfect condition, according to document IEC/EN 60950-1 Safety

Requirements.

Condensate / Change of Temperature

To avoid condensation in the system, the unit must be allowed to slowly adjust itself to warmer temperatures after

removal from cold and cool environments.

Do not open the Main housing

The Connection Chamber can be opened for required cabling needs, but there is no need to open the main

housing (crews from bottom side) in order to set the iPOINT unit. The unit does not have any internal setting

elements or displays.

Connections / Power Supply

The supply circuits must comply with the conditions set out for the SELV circuits (see EN 60950-1).

The signal circuits must comply with the conditions set out for the SELV circuits (see EN 60950-1).

Use shielded cables for the Ethernet/PoE & RS422 cables. This is the only way to achieve the prescribed EMC.

During maintenance damage could occur if printed circuit boards or cables are connected or disconnected whilst

the power supply is still on. Therefore, only work on the connection and the components when they are not live.

Spare Parts

We recommend that only personnel, original products, spare and replacement parts authorized by IDENTEC

SOLUTIONS be used for installation, service and repair. IDENTEC SOLUTIONS does not accept any responsibility

for materials used, work carried out or possible consequences from unauthorized third party vendors.

Glossary

 SELV Safety Extra Low Voltage – Protective measure against dangerous body currents. Protective first voltage, circuit not floating.

 EMC Electromagnetic Compatibility

iPOINT – Hardware User Manual | 18.06.2020

Contents

1. Preface .................................................................................................................................................................... 7

2. Introduction .............................................................................................................................................................. 8

2.1 iPOINT and System Description ...................................................................................................................... 8

2.1.1 UHF Interface ...................................................................................................................................... 9

2.1.2 LF Interface ......................................................................................................................................... 9

2.1.3 NFC Interface .................................................................................................................................... 10

2.2 System Components – Tags.......................................................................................................................... 11

2.3 Ports Overview & Topologies......................................................................................................................... 12

2.3.1 PoE Connector & Pinout ................................................................................................................... 14

2.3.2 RS422 Connectors & Pinout ............................................................................................................. 14

2.3.3 USB Connector & Pinout................................................................................................................... 15

2.4 USB Only mode – Function and specification ............................................................................................... 16

2.5 Communication Interface Priorities ................................................................................................................ 16

2.6 Lid Open Detection ........................................................................................................................................ 16

3. Initial Operation / Configuration ............................................................................................................................. 17

3.1 Status LEDs ................................................................................................................................................... 17

4. Mechanical Information & Installation .................................................................................................................... 18

4.1 Opening the connection Chamber ................................................................................................................. 18

4.2 Mounting Options ........................................................................................................................................... 19

4.2.1 Optional Extra: Pole Mount Bracket Kit ............................................................................................. 20

4.2.2 Optional Extra: Extension Bracket Kit ............................................................................................... 21

5. Troubleshooting ..................................................................................................................................................... 23

6. Maintenance .......................................................................................................................................................... 23

6.1 Exchanging an iPOINT within the daisy chain ............................................................................................... 23

6.2 Firmware Update ........................................................................................................................................... 24

6.3 Spare Parts .................................................................................................................................................... 24

6.4 Returns ........................................................................................................................................................... 24

7. Technical Specifications ........................................................................................................................................ 25

iPOINT – Hardware User Manual | 18.06.2020

1. Preface

This installation manual must be read carefully prior to starting the installation. The described installation works

assuming that installation materials like cables, antennas and any mechanical parts are available.

This document is the hardware description of the iPOINT. This document is intended only for mechanical and

electrical installation of these central units.

IDENTEC SOLUTIONS reserves the right to make changes and updates to the content contained herein. It is the

user’s responsibility to contact the service department for any possible changes or updates to operating and

maintenance procedures.

Updates will be provided upon request. The information in this document may be subjected to changes without

prior notice.

Check whether delivery is complete and for any damages. If the delivery is not complete or damaged

immediately inform the carrier. The dispatch and service organization of IDENTEC SOLUTIONS should also

be informed to facilitate the repair or exchange of the system.

Product Contents (deliverables):

 iPOINT Device

 Mounting Plate

 Cable glands and blind plugs

 Hardware User Manual

Associated Documents

 SDK Online Help

 i-SHARE Manual

 Specific tag manuals

iPOINT – Hardware User Manual | 18.06.2020

2. Introduction

2.1 iPOINT and System Description

The iPOINT device provides a functional combination of: The “zone location” system of an i-MARK, the long-range

Reader functionality of an i-PORT as well as close proximity NFC functionality, encased in an attractive, rugged,

IP67 housing.

The Housing contains:

- 5 Status LEDs (see Section 3.1)

- a Connection Chamber where the wired interfaces can be accessed

- Relevant cable glands, as wired access points, depending on the device setup

- Mounting Plate and securing screw (see Section 4)

For a detailed description of how to correctly open the connection chamber and other mechanical information,

please refer to Section 4.1.

The iPOINT can used as a standalone device or in a daisychain of devices. See Section 2.3 for more details.

Following is a description of the wireless technologies that are available within the iPOINT Device.

iPOINT – Hardware User Manual | 18.06.2020

2.1.1 UHF Interface

The UHF interface is a wireless communication interface using the UHF ISM frequency band and IDENTEC’s

protocols.

The iPOINT X has two internal UHF antennas built in and can communicate up to a range of 500 meters with its

Tags.

The main benefit of two antennas is the elimination of RF dead spots in static systems.

2.1.2 LF Interface

The LF Interface uses IDENTEC’s LFBOOST Marker technology. Zone location at Low Frequency can be achieved

with a configurable field range up to 5 Meters. This allows Tag detection in a specific area.

iPOINT – Hardware User Manual | 18.06.2020

2.1.3 NFC Interface

The NFC Interface is a Near Field Communication interface. The iPOINT can be used as an entry terminal or for

other NFC communication. The range to the Tag is around 10-15cm and is compatible with the i-Q355 Series of

Tags as well as standard NFC cards.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema RFID de IDENTEC SOLUTIONS

IDENTEC SOLUTIONS

IDENTEC SOLUTIONS i-B350L-CC Instrucciones de uso

Manuales populares de Sistema RFID de otras marcas

Chainway

Chainway R1 Manual de usuario

IFM

IFM DTC600 Manual de usuario

Elatec

Elatec TWN4 MULTITECH NANO LEGIC 63 M Manual de usuario

RHOMBUS

RHOMBUS DR20 Manual de usuario

Sirit

Sirit IDentity 6204 Manual de usuario

SOREX

SOREX FLEX Manual de usuario

Omron

Omron V780-HMD68-EIP-KR Manual de usuario

Shuttle

Shuttle BR06 Instrucciones de uso

Digilock

Digilock Curve Keypad Basic Manual de usuario

Atid

Atid AT870 Manual de usuario

Chacon

Chacon 34958 Manual de usuario

Paxton

Paxton PROXIMITY architectural reader Manual de usuario

CipherLab

CipherLab 1800 series Manual de usuario

Brady

Brady FR22 Manual de usuario

Kronotech

Kronotech BLUEBOX GEN2 M30 UHF Manual de usuario

Unitech

Unitech RH767 Manual de usuario

Honeywell

Honeywell 026366.00 Manual de usuario

Elatec

Elatec TCPConv Manual de usuario

IDENTEC SOLUTIONS iPOINT Si Instrucciones de uso

Manuales populares de Sistema RFID de otras marcas