TCL S4310 Manual de usuario

Quick Start Guide

S4310

3.1 Channel Sound Bar with Dolby Audio

™

, DTS

Virtual:X

™

and Wireless Subwoofer

the latest news on product releases,

promotional offers, and more!*

Enjoy exclusive beneﬁts with registration:

Text a photo of the

camera icon to 71403

Or register online at register.tcl.com

Need help? Visit photoregister.com/help

or text HELP to 71403

Text to Register

Expedited support and service Insider tips on your sound bar

Exclusive offers and promotions Veriﬁcation of ownership

*Only Available to U.S. Customers

TCLSBSS

Make sure you read all the safety information

before you use this product.

Warning:

To avoid the danger of suffocation, keep

plastic packaging away from pets, babies,

and children. Do not use packaging bags

in cribs, beds, carriages, or playpens.

User Manual can be found at www.tcl.com/us

on the speciﬁc product page in the

“Download” section.

What's in the box

(Cable length: 4 ft. 11") (Cable length: 9.8")

Sound bar

Wall mount template

Wall anchor x 4

HDMI cable IR pass-through cable

Subwoofer

Safety

instructions

Safety leaflet

Warranty

card

Warranty card

QSG

Quick Start Guide

Remote control

AAA battery x 2

Wall mount screw x 2

Wall mount bracket x 2

Screw × 4

(for installing the wall mount brackets)

Power cord x 2

(Cable length: 4 ft. 11")

6 7

AUX input connector

IR input connector

AUX VA input connector

AC input power connector

Optical input connector

USB Type A connector

HDMI ARC connector

Short Press: Select Bluetooth mode

Long press: Bluetooth Pairing

Short press: Switch input sources

(HDMI-ARC/Optical/AUX/AUX VA/USB/Bluetooth)

Long press: Enter subwoofer pairing

(If subwoofer disconnected)

Press to increase or

decrease the volume level.

Volume buttons:

Source button:

Power button: Bluetooth button:

Short Press: Power On/Sleep

Long Press: Power Off

Overview

Input Source LED Indicator:

HDMI-ARC: Magenta

Optical: Yellow

AUX: Green

AUX VA: Orange

USB: Cyan

Bluetooth: Blue

Overview

The subwoofer is now connected to the

sound bar.

Press and hold the button on the

subwoofer for 3 seconds until an amber light

begins flashing above the pair button.

Press and hold the button on the sound

bar until a yellow LED indicator flashes on the

sound bar. After a short while, the sound bar

LED will turn green and the subwoofer LED

will turn solid.

The subwoofer will pair automatically with sound

bar upon first use. In case of a problem, take the

following steps to manually pair:

Battery type: 1.5V AAA battery x 2

Use the Remote

Install or replace the

remote batteries

Warning: Do not expose batteries to excessive

heat such as sunshine, fire, or the like. Keep

new and used batteries away from children.

For disposal or recycling information,

please contact your local authorities.

CAUTION: Danger of explosion if the battery

is incorrectly replaced. Replace only with the

same or equivalent type.

Short press: mute / unmute the sound

Short press to turn on/off DTS Virtual:X

Short Press: switch to Voice Enhance

Short press to enter the Bass Boost Menu

Short press to enter the treble sound effect

Increase or decrease treble with / button

Short press to adjust the bass sound effect

Increase or decrease bass with / button

Short press: Switch input sound mode

Standard, Voice, Music, Movie, Game, Sports

11 10

Increase volume

Decrease volume

Play previous music; turn to previous item

Play next music; turn to next item

Play/Pause music

Short press to turn on/off DTS TruVolume

Short press to enter Surround Enhance

Short press: power on / sleep

Long press: power off

Short press: Switch input sources

HDMI-ARC/Optical/AUX/AUX VA/USB

/Bluetooth

Long press: Bluetooth Pairing

Short press: select Bluetooth mode

Sound Bar LED Display

Remote Control Sound bar Action

Power off/Sleep

Power On

Mute sound

Bluetooth Pairing

Source

DTS Virtual:X/TruVolume

Voice Enhance

Bass Boost / Night

Surround Enhance

Sound Mode

LED Behavior on Sound bar

Volume up/down

Treble Adjustment

Bass Adjustment

Skip/Previous

Input Source LED Indicator:

HDMI ARC: Magenta

Optical: Yellow

Aux: Green

Aux VA: Orange

USB: Cyan

Bluetooth: Blue

Power Off: All LEDs light turn on and turn off from the sides to

the center.

Power On: LEDs will turn on from the center to the sides.

Mute On: Center LED will flash several times.

Mute Off: Current Volume Level will be shown.

Blue LED will flash rapidly

Volume Up: LEDs will gradually turn on from the center to the

sides

Volume Down: LEDs will gradually turn off from the sides to

the center

Skip: LEDs move from the left to the right

Previous: LEDs move from the right to the left

Enabled: LEDs will turn on from the center to the sides.

Disabled: All LEDs light turn on and turn off from the sides to

the center.

Long Press: Enter Voice Enhance adjustment

Use UP/DOWN keys to adjust between four different levels.

Short Press: Show current Voice Enhance level

Use UP/DOWN keys to adjust between four different levels.

Long Press: Enable/Disable Night mode with voice broadcast

Short Press: Show current Bass Boost level

Use UP/DOWN keys to adjust between four different levels.

Short Press: Show current Surround Enhance level

Use UP/DOWN keys to adjust between four different levels.

Long Press: Turn on or turn off AUX voice assistant.

Short Press: Show current Treble level.

Increase/Decrease using UP/DOWN keys to adjust thirteen

different levels.

Short Press: Show current Bass level.

Increase/Decrease using UP/DOWN keys to adjust thirteen

different levels.

Press to switch sound mode in following order:

Standard / Voice / Music / Movie / Game / Sports

< 9.8'

Place your Sound Bar

and Subwoofer

The ideal place to position the Sound Bar is

centered underneath your TV.

Note: Do not place your sound bar in a location

exposed to direct sunlight, heat, fire, or moisture.

Required tools:

Place the included wall mount template on the

wall. Make sure the wall mount template is at

least 2 inches below the center of the TV.

Use the tape to stick the wall mount template

firmly on the wall.

Mark on the wall using each marking on the

template through the mounting holes.

Take away the wall mount template.

Drill screw holes at each marking on the wall.

Use a level to make sure the wall mount template

is positioned accurately

2 ft. 3.1"

> 2"

Wall mount your Sound Bar

Required tools:

Insert the included screws with the brackets

into the hole of the wall anchors.

Insert the wall anchors in the holes on the wall.

Fix and tighten the wall brackets and screws

on the sound bar.

Note:

Do not place your sound bar in a location

exposed to direct sunlight, heat, fire, or moisture.

Only suitable for mounting at heights: < 6 ft. 6.7"

Pick up the sound bar and attach it to the

brackets, similar to how you would hang a

picture. Make sure everything is tight.

Replace the screws with the included long

wall mount screws.

Wall mount your Sound Bar

Tabla de contenidos

Manuales populares de Sistema de altavoces de otras marcas

JVC

JVC CA-MXK5R Manual de usuario

LG NB4532B Manual de usuario

JVC

JVC CA-FSH100 Manual de usuario

5Core

5Core Pro Series Manual de usuario

EAW

EAW MQV1394e Manual de usuario

Lynx

Lynx GXR-LA10A Manual de usuario

iLive

iLive ITB066B Manual de usuario

RDX

RDX QuickStation 4 Manual de usuario

Electro-Voice

Electro-Voice S-122 Manual de usuario

Sven

Sven SPS-619 GOLD Manual de usuario

Pioneer

Pioneer CS-7070 Manual de usuario

EAW

EAW UB82e Manual de usuario

Sondpex

Sondpex Active Speaker System and Digital Music... Manual de usuario

JVC

JVC NX-PN7 Manual de usuario

Marshall Amplification

Marshall Amplification AR-DM61-BT Manual de usuario

Yamaha

Yamaha NX-A01 - Speaker Sys Manual de usuario

SE Audiotechnik

SE Audiotechnik I-LINE Manual de usuario

Gemini

Gemini WRX-843 Series Manual de usuario