TC-Helicon Perform-V Manual de usuario

SWITCH-3

1 2 3

E60542611

Headphone volume

White = Off

Green = On

Hold an effect button

to enter edit mode.

After the effect level reaches maximum, the LED

ring resets and changes the style (sound) of the

effect. The LED color also changes for each style.

Turn the control knob. The

effect volume increases as

the LED segments ﬁll.

Tone automatically

and dynamically adds

EQ, compression, de-

essing and gating to

your voice.

Anti-Feedback helps

to eliminate squealing

from your speakers.

After all EQs have

been used, Anti-

Feedback will turn

down the level.

To prevent

feedback, place the

mic behind your

main speakers.

Pitch correction

“nudges” you to the

nearest semi-tone.

It won’t make a bad

singer good, but it

will subtly make your

pitch more accurate.

Hold 2 seconds

YOU WILL NEED…

A Preset is a group of

effects used to create

an overall sound.

Changes made to

Presets are saved

automatically.

If you have a

condenser mic,

MP-75 or MP-76,

you will need to turn

on +48V for it to work.

Talk mode bypasses

all of the effects so

you can talk to the

audience.

Tap in time with your

music to set the

tempo for Echo.

Tempo is global and

not stored within the

Presets.

QUICK GUIDE

Sing loud!

www.tc-helicon.com/products/perform-v/support/

www.tc-helicon.com/products/voicesupport/

support.tc-helicon.com

Switch-3 MP-76 MP-75

Audience

www.tc-helicon.com/products/perform-v/support/

Flat Correct Sharp

5 FX ON/OFF

6 PRESETS

3 SET GAIN 4 A

10 FX BYPASS

13 B EFFECT EDITING

16 B “BEAM” NEW SOUNDS

FULL MANUAL SUPPORT/FORUMS

11 TAP TEMPO

14 PITCH METER

17 UPDATES & PRESETS

12 CONDENSER MIC

15 MUSIC IN

18 STAGE SETUP

7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION

13 A EFFECT EDITING

16 A GET THE APP

19 ACCESSORIES

4 B

TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3

1 2 3

E60542611

Headphone volume

White = Off

Green = On

Hold an effect button

to enter edit mode.

After the effect level reaches maximum, the LED

ring resets and changes the style (sound) of the

effect. The LED color also changes for each style.

Turn the control knob. The

effect volume increases as

the LED segments ﬁll.

Tone automatically

and dynamically adds

EQ, compression, de-

essing and gating to

your voice.

Anti-Feedback helps

to eliminate squealing

from your speakers.

After all EQs have

been used, Anti-

Feedback will turn

down the level.

To prevent

feedback, place the

mic behind your

main speakers.

Pitch correction

“nudges” you to the

nearest semi-tone.

It won’t make a bad

singer good, but it

will subtly make your

pitch more accurate.

Hold 2 seconds

YOU WILL NEED…

A Preset is a group of

effects used to create

an overall sound.

Changes made to

Presets are saved

automatically.

If you have a

condenser mic,

MP-75 or MP-76,

you will need to turn

on +48V for it to work.

Talk mode bypasses

all of the effects so

you can talk to the

audience.

Tap in time with your

music to set the

tempo for Echo.

Tempo is global and

not stored within the

Presets.

QUICK GUIDE

Sing loud!

www.tc-helicon.com/products/perform-v/support/

www.tc-helicon.com/products/voicesupport/

support.tc-helicon.com

Switch-3 MP-76 MP-75

Audience

www.tc-helicon.com/products/perform-v/support/

Flat Correct Sharp

5 FX ON/OFF

6 PRESETS

3 SET GAIN 4 A

10 FX BYPASS

13 B EFFECT EDITING

16 B “BEAM” NEW SOUNDS

FULL MANUAL SUPPORT/FORUMS

11 TAP TEMPO

14 PITCH METER

17 UPDATES & PRESETS

12 CONDENSER MIC

15 MUSIC IN

18 STAGE SETUP

7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION

13 A EFFECT EDITING

16 A GET THE APP

19 ACCESSORIES

4 B

TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3

1 2 3

E60542611

Headphone volume

White = Off

Green = On

Hold an effect button

to enter edit mode.

After the effect level reaches maximum, the LED

ring resets and changes the style (sound) of the

effect. The LED color also changes for each style.

Turn the control knob. The

effect volume increases as

the LED segments ﬁll.

Tone automatically

and dynamically adds

EQ, compression, de-

essing and gating to

your voice.

Anti-Feedback helps

to eliminate squealing

from your speakers.

After all EQs have

been used, Anti-

Feedback will turn

down the level.

To prevent

feedback, place the

mic behind your

main speakers.

Pitch correction

“nudges” you to the

nearest semi-tone.

It won’t make a bad

singer good, but it

will subtly make your

pitch more accurate.

Hold 2 seconds

YOU WILL NEED…

A Preset is a group of

effects used to create

an overall sound.

Changes made to

Presets are saved

automatically.

If you have a

condenser mic,

MP-75 or MP-76,

you will need to turn

on +48V for it to work.

Talk mode bypasses

all of the effects so

you can talk to the

audience.

Tap in time with your

music to set the

tempo for Echo.

Tempo is global and

not stored within the

Presets.

QUICK GUIDE

Sing loud!

www.tc-helicon.com/products/perform-v/support/

www.tc-helicon.com/products/voicesupport/

support.tc-helicon.com

Switch-3 MP-76 MP-75

Audience

www.tc-helicon.com/products/perform-v/support/

Flat Correct Sharp

5 FX ON/OFF

6 PRESETS

3 SET GAIN 4 A

10 FX BYPASS

13 B EFFECT EDITING

16 B “BEAM” NEW SOUNDS

FULL MANUAL SUPPORT/FORUMS

11 TAP TEMPO

14 PITCH METER

17 UPDATES & PRESETS

12 CONDENSER MIC

15 MUSIC IN

18 STAGE SETUP

7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION

13 A EFFECT EDITING

16 A GET THE APP

19 ACCESSORIES

4 B

TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3

1 2 3

E60542611

Headphone volume

White = Off

Green = On

Hold an effect button

to enter edit mode.

After the effect level reaches maximum, the LED

ring resets and changes the style (sound) of the

effect. The LED color also changes for each style.

Turn the control knob. The

effect volume increases as

the LED segments ﬁll.

Tone automatically

and dynamically adds

EQ, compression, de-

essing and gating to

your voice.

Anti-Feedback helps

to eliminate squealing

from your speakers.

After all EQs have

been used, Anti-

Feedback will turn

down the level.

To prevent

feedback, place the

mic behind your

main speakers.

Pitch correction

“nudges” you to the

nearest semi-tone.

It won’t make a bad

singer good, but it

will subtly make your

pitch more accurate.

Hold 2 seconds

YOU WILL NEED…

A Preset is a group of

effects used to create

an overall sound.

Changes made to

Presets are saved

automatically.

If you have a

condenser mic,

MP-75 or MP-76,

you will need to turn

on +48V for it to work.

Talk mode bypasses

all of the effects so

you can talk to the

audience.

Tap in time with your

music to set the

tempo for Echo.

Tempo is global and

not stored within the

Presets.

QUICK GUIDE

Sing loud!

www.tc-helicon.com/products/perform-v/support/

www.tc-helicon.com/products/voicesupport/

support.tc-helicon.com

Switch-3 MP-76 MP-75

Audience

www.tc-helicon.com/products/perform-v/support/

Flat Correct Sharp

5 FX ON/OFF

6 PRESETS

3 SET GAIN 4 A

10 FX BYPASS

13 B EFFECT EDITING

16 B “BEAM” NEW SOUNDS

FULL MANUAL SUPPORT/FORUMS

11 TAP TEMPO

14 PITCH METER

17 UPDATES & PRESETS

12 CONDENSER MIC

15 MUSIC IN

18 STAGE SETUP

7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION

13 A EFFECT EDITING

16 A GET THE APP

19 ACCESSORIES

4 B

TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3

1 2 3

E60542611

Headphone volume

White = Off

Green = On

Hold an effect button

to enter edit mode.

After the effect level reaches maximum, the LED

ring resets and changes the style (sound) of the

effect. The LED color also changes for each style.

Turn the control knob. The

effect volume increases as

the LED segments ﬁll.

Tone automatically

and dynamically adds

EQ, compression, de-

essing and gating to

your voice.

Anti-Feedback helps

to eliminate squealing

from your speakers.

After all EQs have

been used, Anti-

Feedback will turn

down the level.

To prevent

feedback, place the

mic behind your

main speakers.

Pitch correction

“nudges” you to the

nearest semi-tone.

It won’t make a bad

singer good, but it

will subtly make your

pitch more accurate.

Hold 2 seconds

YOU WILL NEED…

A Preset is a group of

effects used to create

an overall sound.

Changes made to

Presets are saved

automatically.

If you have a

condenser mic,

MP-75 or MP-76,

you will need to turn

on +48V for it to work.

Talk mode bypasses

all of the effects so

you can talk to the

audience.

Tap in time with your

music to set the

tempo for Echo.

Tempo is global and

not stored within the

Presets.

QUICK GUIDE

Sing loud!

www.tc-helicon.com/products/perform-v/support/

www.tc-helicon.com/products/voicesupport/

support.tc-helicon.com

Switch-3 MP-76 MP-75

Audience

www.tc-helicon.com/products/perform-v/support/

Flat Correct Sharp

5 FX ON/OFF

6 PRESETS

3 SET GAIN 4 A

10 FX BYPASS

13 B EFFECT EDITING

16 B “BEAM” NEW SOUNDS

FULL MANUAL SUPPORT/FORUMS

11 TAP TEMPO

14 PITCH METER

17 UPDATES & PRESETS

12 CONDENSER MIC

15 MUSIC IN

18 STAGE SETUP

7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION

13 A EFFECT EDITING

16 A GET THE APP

19 ACCESSORIES

4 B

TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3

1 2 3

E60542611

Headphone volume

White = Off

Green = On

Hold an effect button

to enter edit mode.

After the effect level reaches maximum, the LED

ring resets and changes the style (sound) of the

effect. The LED color also changes for each style.

Turn the control knob. The

effect volume increases as

the LED segments ﬁll.

Tone automatically

and dynamically adds

EQ, compression, de-

essing and gating to

your voice.

Anti-Feedback helps

to eliminate squealing

from your speakers.

After all EQs have

been used, Anti-

Feedback will turn

down the level.

To prevent

feedback, place the

mic behind your

main speakers.

Pitch correction

“nudges” you to the

nearest semi-tone.

It won’t make a bad

singer good, but it

will subtly make your

pitch more accurate.

Hold 2 seconds

YOU WILL NEED…

A Preset is a group of

effects used to create

an overall sound.

Changes made to

Presets are saved

automatically.

If you have a

condenser mic,

MP-75 or MP-76,

you will need to turn

on +48V for it to work.

Talk mode bypasses

all of the effects so

you can talk to the

audience.

Tap in time with your

music to set the

tempo for Echo.

Tempo is global and

not stored within the

Presets.

QUICK GUIDE

Sing loud!

www.tc-helicon.com/products/perform-v/support/

www.tc-helicon.com/products/voicesupport/

support.tc-helicon.com

Switch-3 MP-76 MP-75

Audience

www.tc-helicon.com/products/perform-v/support/

Flat Correct Sharp

5 FX ON/OFF

6 PRESETS

3 SET GAIN 4 A

10 FX BYPASS

13 B EFFECT EDITING

16 B “BEAM” NEW SOUNDS

FULL MANUAL SUPPORT/FORUMS

11 TAP TEMPO

14 PITCH METER

17 UPDATES & PRESETS

12 CONDENSER MIC

15 MUSIC IN

18 STAGE SETUP

7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION

13 A EFFECT EDITING

16 A GET THE APP

19 ACCESSORIES

4 B

TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3

1 2 3

E60542611

Headphone volume

White = Off

Green = On

Hold an effect button

to enter edit mode.

After the effect level reaches maximum, the LED

ring resets and changes the style (sound) of the

effect. The LED color also changes for each style.

Turn the control knob. The

effect volume increases as

the LED segments ﬁll.

Tone automatically

and dynamically adds

EQ, compression, de-

essing and gating to

your voice.

Anti-Feedback helps

to eliminate squealing

from your speakers.

After all EQs have

been used, Anti-

Feedback will turn

down the level.

To prevent

feedback, place the

mic behind your

main speakers.

Pitch correction

“nudges” you to the

nearest semi-tone.

It won’t make a bad

singer good, but it

will subtly make your

pitch more accurate.

Hold 2 seconds

YOU WILL NEED…

A Preset is a group of

effects used to create

an overall sound.

Changes made to

Presets are saved

automatically.

If you have a

condenser mic,

MP-75 or MP-76,

you will need to turn

on +48V for it to work.

Talk mode bypasses

all of the effects so

you can talk to the

audience.

Tap in time with your

music to set the

tempo for Echo.

Tempo is global and

not stored within the

Presets.

QUICK GUIDE

Sing loud!

www.tc-helicon.com/products/perform-v/support/

www.tc-helicon.com/products/voicesupport/

support.tc-helicon.com

Switch-3 MP-76 MP-75

Audience

www.tc-helicon.com/products/perform-v/support/

Flat Correct Sharp

5 FX ON/OFF

6 PRESETS

3 SET GAIN 4 A

10 FX BYPASS

13 B EFFECT EDITING

16 B “BEAM” NEW SOUNDS

FULL MANUAL SUPPORT/FORUMS

11 TAP TEMPO

14 PITCH METER

17 UPDATES & PRESETS

12 CONDENSER MIC

15 MUSIC IN

18 STAGE SETUP

7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION

13 A EFFECT EDITING

16 A GET THE APP

19 ACCESSORIES

4 B

TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3

1 2 3

E60542611

Headphone volume

White = Off

Green = On

Hold an effect button

to enter edit mode.

After the effect level reaches maximum, the LED

ring resets and changes the style (sound) of the

effect. The LED color also changes for each style.

Turn the control knob. The

effect volume increases as

the LED segments ﬁll.

Tone automatically

and dynamically adds

EQ, compression, de-

essing and gating to

your voice.

Anti-Feedback helps

to eliminate squealing

from your speakers.

After all EQs have

been used, Anti-

Feedback will turn

down the level.

To prevent

feedback, place the

mic behind your

main speakers.

Pitch correction

“nudges” you to the

nearest semi-tone.

It won’t make a bad

singer good, but it

will subtly make your

pitch more accurate.

Hold 2 seconds

YOU WILL NEED…

A Preset is a group of

effects used to create

an overall sound.

Changes made to

Presets are saved

automatically.

If you have a

condenser mic,

MP-75 or MP-76,

you will need to turn

on +48V for it to work.

Talk mode bypasses

all of the effects so

you can talk to the

audience.

Tap in time with your

music to set the

tempo for Echo.

Tempo is global and

not stored within the

Presets.

QUICK GUIDE

Sing loud!

www.tc-helicon.com/products/perform-v/support/

www.tc-helicon.com/products/voicesupport/

support.tc-helicon.com

Switch-3 MP-76 MP-75

Audience

www.tc-helicon.com/products/perform-v/support/

Flat Correct Sharp

5 FX ON/OFF

6 PRESETS

3 SET GAIN 4 A

10 FX BYPASS

13 B EFFECT EDITING

16 B “BEAM” NEW SOUNDS

FULL MANUAL SUPPORT/FORUMS

11 TAP TEMPO

14 PITCH METER

17 UPDATES & PRESETS

12 CONDENSER MIC

15 MUSIC IN

18 STAGE SETUP

7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION

13 A EFFECT EDITING

16 A GET THE APP

19 ACCESSORIES

4 B

TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3

1 2 3

E60542611

Headphone volume

White = Off

Green = On

Hold an effect button

to enter edit mode.

After the effect level reaches maximum, the LED

ring resets and changes the style (sound) of the

effect. The LED color also changes for each style.

Turn the control knob. The

effect volume increases as

the LED segments ﬁll.

Tone automatically

and dynamically adds

EQ, compression, de-

essing and gating to

your voice.

Anti-Feedback helps

to eliminate squealing

from your speakers.

After all EQs have

been used, Anti-

Feedback will turn

down the level.

To prevent

feedback, place the

mic behind your

main speakers.

Pitch correction

“nudges” you to the

nearest semi-tone.

It won’t make a bad

singer good, but it

will subtly make your

pitch more accurate.

Hold 2 seconds

YOU WILL NEED…

A Preset is a group of

effects used to create

an overall sound.

Changes made to

Presets are saved

automatically.

If you have a

condenser mic,

MP-75 or MP-76,

you will need to turn

on +48V for it to work.

Talk mode bypasses

all of the effects so

you can talk to the

audience.

Tap in time with your

music to set the

tempo for Echo.

Tempo is global and

not stored within the

Presets.

QUICK GUIDE

Sing loud!

www.tc-helicon.com/products/perform-v/support/

www.tc-helicon.com/products/voicesupport/

support.tc-helicon.com

Switch-3 MP-76 MP-75

Audience

www.tc-helicon.com/products/perform-v/support/

Flat Correct Sharp

5 FX ON/OFF

6 PRESETS

3 SET GAIN 4 A

10 FX BYPASS

13 B EFFECT EDITING

16 B “BEAM” NEW SOUNDS

FULL MANUAL SUPPORT/FORUMS

11 TAP TEMPO

14 PITCH METER

17 UPDATES & PRESETS

12 CONDENSER MIC

15 MUSIC IN

18 STAGE SETUP

7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION

13 A EFFECT EDITING

16 A GET THE APP

19 ACCESSORIES

4 B

TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3

1 2 3

E60542611

Headphone volume

White = Off

Green = On

Hold an effect button

to enter edit mode.

After the effect level reaches maximum, the LED

ring resets and changes the style (sound) of the

effect. The LED color also changes for each style.

Turn the control knob. The

effect volume increases as

the LED segments ﬁll.

Tone automatically

and dynamically adds

EQ, compression, de-

essing and gating to

your voice.

Anti-Feedback helps

to eliminate squealing

from your speakers.

After all EQs have

been used, Anti-

Feedback will turn

down the level.

To prevent

feedback, place the

mic behind your

main speakers.

Pitch correction

“nudges” you to the

nearest semi-tone.

It won’t make a bad

singer good, but it

will subtly make your

pitch more accurate.

Hold 2 seconds

YOU WILL NEED…

A Preset is a group of

effects used to create

an overall sound.

Changes made to

Presets are saved

automatically.

If you have a

condenser mic,

MP-75 or MP-76,

you will need to turn

on +48V for it to work.

Talk mode bypasses

all of the effects so

you can talk to the

audience.

Tap in time with your

music to set the

tempo for Echo.

Tempo is global and

not stored within the

Presets.

QUICK GUIDE

Sing loud!

www.tc-helicon.com/products/perform-v/support/

www.tc-helicon.com/products/voicesupport/

support.tc-helicon.com

Switch-3 MP-76 MP-75

Audience

www.tc-helicon.com/products/perform-v/support/

Flat Correct Sharp

5 FX ON/OFF

6 PRESETS

3 SET GAIN 4 A

10 FX BYPASS

13 B EFFECT EDITING

16 B “BEAM” NEW SOUNDS

FULL MANUAL SUPPORT/FORUMS

11 TAP TEMPO

14 PITCH METER

17 UPDATES & PRESETS

12 CONDENSER MIC

15 MUSIC IN

18 STAGE SETUP

7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION

13 A EFFECT EDITING

16 A GET THE APP

19 ACCESSORIES

4 B

TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

Otros manuales para Perform-V

Tabla de contenidos

Otros manuales de Hardware de computadora de TC-Helicon

TC-Helicon

TC-Helicon VoiceDoubler Manual de usuario

TC-Helicon

TC-Helicon VoicePro Manual de usuario

TC-Helicon

TC-Helicon VoicePrism Manual de usuario

TC-Helicon

TC-Helicon PERFORM-VK Manual de usuario

TC-Helicon

TC-Helicon VoiceOne Manual de usuario

TC-Helicon

TC-Helicon VOICEPRISM PLUS Guía de configuración

TC-Helicon

TC-Helicon PERFORM-VE Manual de usuario

TC-Helicon

TC-Helicon Quintet Manual de usuario

TC-Helicon

TC-Helicon VoiceTone Correct XT Manual de usuario

TC-Helicon

TC-Helicon PERFORM-VK Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario