Taylor TE10C Manual de usuario
Digital Scale
Balance Numérique
Báscula digital
Instruction Manual
Manuel d’instructions
Manual de instrucciones
Leading the Way in Accuracy®
TE10C / TE32C
TE10C capacity, capacité, capacidad: 10 lb x 0.1 oz / 5kg x 1g
TE32C capacity, capacité, capacidad: 2 lb x 0.1 oz / 1kg x 1g
2
Thank you for purchasing a
Taylor®Digital Scale.
Your Taylor®scale is an example of superior
design and craftsmanship.
Please read this instruction manual
carefully before use.
Keep these instructions handy
for future reference.
3
To turn the scale on, press the button marked “ON/OFF”. The
display will rst show “8888 ” followed by “0.0” (oz) or “0” (g).
Press “ON/OFF” to manually turn the scale off. The scale will
also automatically turn off after approximately 2 minutes
of nonuse.
Your scale is set at the factory to weigh in pounds/ounces.
Press the “LB/KG” to switch to kilogram/gram units of
measurement. (The scale will reset to pounds/ounces when
it is turned off.)
To Turn the Scale On and Off
To Change Units of Measurement
When the display shows zero, it is ready to weigh an
object. Multiple objects can be placed on the platform, up
to the scale’s weight capacity. The display will show the
total weight of all objects on the platform. When one of the
objects is removed from the platform, the weight of the
remaining items will continue to display.
Overload Warning: Should “Err” appear on the display
during a weighing, remove the weight immediately;
otherwise, permanent damage could occur.
Weighing Operation
4
You may wish to weigh ingredients in a bowl or other con-
tainer (not included). In this case, you will need to tare, or
offset, the weight of the bowl so that only the weight of the
ingredients is displayed.
1. While the scale is on, place the empty container on
the platform. Press the “TARE/ZERO” button. The weight
will reset to zero.
2. Place the item in the container. The weight of the item
alone will display.
3. To weigh additional items in the same container, continue
to press “TARE/ZERO” to tare out the weight of each
new item.
4. When weights have been tared out, the LCD will show
a negative number when the weight is removed from
the scale. To reset the scale back to zero, press the
“TARE/ZERO” button.
Tare Operation
This scale operates on an AC adapter (included) or one
9-Volt alkaline battery (not included).
Power Sources
To power the scale using the adapter, insert the connector
plug into the jack at the back of the scale, and plug the
other end into the proper electrical outlet.
Electrical Power
5
1. Use one 9-Volt alkaline battery (not included).
2. Remove the battery compartment cover on the bottom of
the scale.
3. Attach the battery to the 9-volt battery snap. Place the
battery into the compartment.
4. Replace the compartment cover.
5. Replace the battery when “Lo” appears on the LCD.
6. Remove the battery if the scale will not be used for a long
period of time.
Battery Power
Auto shut-off Feature
The scale will automatically shut off after 2 minutes of non-
use to conserve the battery. The auto-shut off feature can
be disabled to allow the scale to operate continuously. To
disable the auto-shut off feature:
1. While the scale is off, press and hold the “ON/OFF” button.
2. While continuing to hold the “ON/OFF” button, press
and hold the “LB/KG” button.
3. Release the buttons. The display will show “ ”
or “ ”.
4. Press the “ON/OFF” button to toggle between
auto-off (“ ”) or non auto-off (“ ”).
5. Press the “LB/KG” button to select the desired
setting. The display will show “8888” then “0.0”.
6. Set up is complete. The scale is ready for use.
6
Troubleshooting
• If there are no items on the platform, but the LCD does not
show zero, press the “TARE/ZERO” button to reset the
scale to zero.
• Overload Warning: Should “ ” appear on the display
during a weighing, this indicates that the maximum
weighing capacity of the scale has been exceeded.
Remove the weight immediately; otherwise, permanent
damage could occur.
This scale is engineered to give you years of satisfactory
service if you handle it carefully. Here are a few precautions:
1. Always read instructions thoroughly to ensure that you have the full
benet of all the unit’s features.
2. DO NOT immerse unit in water, as doing so will cause damage to
internal components and void the warranty. If you spill liquid on it, dry
it immediately with a soft, lint-free cloth.
3. DO NOT clean the unit with an abrasive or corrosive material. This
may scratch the plastic parts and corrode the electronic circuits.
4. DO NOT subject the units to excessive force, shock, dust,
temperature or humidity. This may result in malfunction, shorter
electronic life span, damaged battery and distorted parts.
5. DO NOT operate or store the scale in high temperature or humidity
conditions. The heat or moisture may interfere with the scale’s internal
components.
6. DO NOT tamper with the unit’s internal components. Doing so will
invalidate the warranty on the units and may cause damage. The unit
contains no user-serviceable parts.
7. This scale is an extremely sensitive weighing device. To avoid damage
to the unit or the battery, do not store anything on the scale.
8. Remove the battery if the scale will not be used for a long period
of time.
9. Do not dispose of batteries in re. Batteries may explode or leak.
Precautions
7
Capacity:
TE10C – 10 lbs x 0.1 oz / 5kgs x 1g
TE32C - 2 lbs x 0.1 oz / 1kg x 1g
Dimensions: 5 7/8" x 6 5/8" x 11/2"
Platform size: 5 7/8" x 4 3/4"
LCD digits: 0.8 inch
Type: 7 segment
Operates on: AC adapter (included) or one 9-volt battery (not included)
This product is warranted against defects in materials or workmanship (excluding batter-
ies) for one (1) year from date of original purchase for the original purchaser. It does not
cover damages or wear resulting from accident, misuse, abuse, or unauthorized adjust-
ment and/or repair. Should this product require service (or replacement at our option)
while under warranty, please pack the item carefully and return it prepaid, along with
receipt showing date of purchase and a note explaining reason for return to:
Taylor Precision Products
2220 Entrada Del Sol, Suite A
Las Cruces, New Mexico 88001
Customer Service Phone: 1-800-225-4834
Customer Service Fax: 1-575-526-4347
www.taylorusa.com
There are no expressed warranties except as listed above. This warranty gives you
specic legal rights, and you may also have other rights which vary from state to state.
For additional product information, or warranty information outside the USA, please
contact us through www.taylorusa.com
©2011 Taylor Precision Products and its afliated companies, all rights reserved.
Taylor® and Leading the Way in Accuracy® are registered trademarks of Taylor
Precision Products and its afliated companies. All rights reserved.
Made to our exact specications in China.
NOT LEGAL FOR TRADE
Specications
One Year Limited Warranty
TE10C / TE32C 11.11
8
Merci de votre achat d’une
balance numérique Taylor®.
Votre balance Taylor® est un exemple
de design et de travail supérieurs.
An d’en soutirer le maximum,
veuillez lire attentivement votre
manuel d’instructions avant
d’utiliser l’appareil.
Conservez ces instructions à portée
de la main à titre de référence.
9
Pour mettre l’appareil en marche, appuyez sur le bouton
« ON/OFF » (marche/arrêt). L’afchage indiquera “8888”,
suivi de “0.0” (oz) ou “0” (g). Appuyez sur le bouton « ON/
OFF » pour mettre la balance hors tension manuellement.
La balance se mettra automatiquement hors tension après 2
minutes d’inactivité.
La balance est réglée en usine indiquer les poids en livres/
onces. Pour modier l’afchage au système métrique (i.e.
kilogrammes/grammes), appuyez sur le bouton « LB/KG ».
(La balance sera réinitialisée au système livres/onces
lorsqu’elle sera mise hors tension).
Pour mettre l’appareil en marche ou éteindre
Pour changer l’unité de mesure
Lorsque l’écran afche zéro, l’appareil est prêt à peser.
Plusieurs objets ne dépassant pas la capacité de pesage
de la balance peuvent être placés sur le plateau. L’écran
afchera le poids total de tous les objets sur le plateau. Si un
des objets est retiré du plateau, le poids des articles restants
restera afché. Avertisseur de surcharge: Si “Err” apparaît
sur l’afcheur ACL durant une opération de pesage, enlevez
immédiatement l’item se trouvant alors sur le plateau de la
balance, à défaut de quoi des dommages permanents à la
balance pourraient s’ensuivre.
Fonctionnement de Pesée
10
Vous pouvez vouloir peser des ingrédients dans un bol ou
un autre contenant (non inclus). Dans ce cas, vous devez
déduire le poids du bol ou du contenant de sorte que seul le
poids des ingrédients sera afché (le terme français pour ce
type d’opération est “tarage”).
1. Lorsque l’appareil est en marche, placez le contenant vide
sur le plateau de la balance. Appuyez sur le bouton
« TARE/ZERO » (tarage/zéro). Le poids afché sera remis
à zéro.
2. Placez l’objet dans le récipient. Le poids de cet objet seul
sera afché.
3. Pour peser des objets supplémentaires dans le même
récipient, continuez à appuyer sur «TARE/ZERO» pour
déterminer le poids à vide de chaque objet additionnel.
4. Lorsque le poids de tous les objets a été déterminé,
l’écran ACL afchera un nombre négatif lorsqu’un poids
est retiré de la balance. Pour réinitialiser le compteur,
appuyez sur la touche «TARE/ZERO».
Opération de Tarage
Cette balance fonctionne lorsque branchée à une prise de courant
régulière à l’aide d’un adaptateur courant alternatif (ou CA, inclus)
ou à l’aide d’une pile alcaline de 9 volts (non incluse).
Sources d’alimentation électrique
Pour utiliser votre balance en utilisant l’adaptateur, insérez
le connecteur de l’adaptateur dans le connecteur situé à
l’arrière de la balance, puis branchez l’adaptateur dans une
prise de courant.
Alimentation par branchement à une prise de courant
Otros manuales para TE10C
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Idiomas:
Otros manuales de Escala de Taylor
Taylor
Taylor THE BIGGEST LOSER 7334 Manual de usuario
Taylor
Taylor TP32 Manual de usuario
Taylor
Taylor The Biggest Loser Manual de usuario
Taylor
Taylor 3875 Manual de usuario
Taylor
Taylor 7568 Manual de usuario
Taylor
Taylor 2000 Manual de usuario
Taylor
Taylor 3804-44 Manual de usuario
Taylor
Taylor 7086 Manual de usuario
Taylor
Taylor 7506 Manual de usuario
Taylor
Taylor 7029 Manual de usuario
Taylor
Taylor The Biggest Loser 3865BL Manual de usuario
Taylor
Taylor 13477 Manual de usuario
Taylor
Taylor TE22FT Manual de usuario
Taylor
Taylor TE10C Manual de usuario
Taylor
Taylor TR250SS Manual de usuario
Taylor
Taylor TP16 Manual de usuario
Taylor
Taylor TE10T Manual de usuario
Taylor
Taylor TE11FT Manual de usuario
Taylor
Taylor 7562 Manual de usuario
Taylor
Taylor The Biggest Loser 3840BL Manual de usuario
