Tatu Marchesan GLHAL Manual de usuario
INSTRUCTIONS MANUAL
GLHAL
Dealer:
Owner:
Firm / Farm:
City: State:
No. of the Certificate of Guarantee:
Serial / No.:
Date: Invoice No.:
Product:
Notes:
IDENTIFICATION
1
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A. GLHAL
The model GLHAL - Light Mounted Orchard Disk Harrow - is
specially designed to work with even penetration, hoeing weeds
without damaging roots, branches and fruits.
Excellent application hoeing citrus orchards or similars.
It has a great versatility, allowing the operation both on drawn and
hydraulic lift types.
It features notched disc blades produced with high standards,
highly resistant to wear and impact.
The GLHAL disk harrow also features:
• Light weight and resistant structure;
• Protection covers;
• Disc blades with deeper concavity;
• Smaller disc blades closer to the plants;
• Friction bearings, cast full spacer spools and adjustable scrapers.
This instructions manual contains the necessary information for
the best performance of this disk harrow. The operator must carefully
read the entire manual before working with the equipment. Also, read
and understand the safety recommendations.
For any further clarification or in the event of technical problems
that may arise during the service, consult your dealer and the Technical
Support department of the factory. They can ensure the fully functioning
of your TATU disk harrow.
Introduction
2Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
GLHAL
Table of contents
1. To the owner 03
2. To the operator 04 to 08
3. Technical specications 09
4. Components 10
5. Assembly 11 to 17
Using the set of wrenches 11
Assembly of bearings and spacer spools 12
Disc gangs assembly 13 & 14
Assembly of disc gangs on the chassis 15
Chassis junction 15
Drawbar assembly 16
Adjustment set assembly 16 & 17
Front cover assembly 17
6. Working preparation 18
Tractor preparation / Harrow preparation / Hitching to the tractor 18
7. Adjustments and operations 19 to 22
Cutting depth 19
Ways to start the harrowing 20
Direction of the maneuvers 21
Operations - Important points 22
8. Maintenance 23
Lubrication / Lubrication points 23
Harrow maintenance 23
9. Important data 24 to 26
Calculation of hourly income 24
Average income table 25
Torque table 26
10. Important 27
11. Notes 28
3
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A. GLHAL
General information
Important
To the owner
Right and left hand side indication are made observing the equipment from the rear.
To order any parts or request technical assistance services, it is required to provide
the data contained on the nameplate, which is located on the equipment chassis.
The acquisition of any TATU product assures to the original purchaser the following
rights:
• Warranty certificate;
• Instructions manual;
• Technical assistance by the dealer on equipment delivery.
However, the owner must check the condition of the equipment on delivery, as well
as knowing the warranty terms.
Special attention should be given to the safety recommendations, operation precautions
and maintenance of the equipment.
The instructions in this manual indicates how to get the best performance and allow
the operator to get maximum income, increasing the equipment lifetime.
This manual should be read by operators and maintenance staff.
• Only people who own a full knowledge of the tractor and equipment
must operate them;
• Marchesan is not responsible for any damage caused by accident
on transporting, incorrect utilization or inadequate storage, either
by negligence and/or lack of experience from any person;
• Marchesan is not responsible for any damage caused by unpredictable
situations or the incorrect use of the equipment.
The warranty shall not be applied to any equipment or any part thereof
which has been altered elsewhere than at the place of manufacture or
which the original purchaser thereof at retail has used or allowed to be
used parts, not made or supplied by Marchesan S/A.
NOTE
4Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
GLHAL
To the operator
Dear user!
Respect the ecology. Do not throw trash away. This gesture of
goodwill helps to protect our environment.
Products such as oil, fuel, filters, batteries and others are
spilled to the soil and can penetrate to the underground layers,
compromising nature. Ecological and conscious disposal of them
should be done.
Working safely
Be careful with the environment
• Security aspects must be carefully observed to avoid accidents.
• This symbol is a warning used to prevent accidents.
• The instructions under this symbol refers to the safety of the
operator or third parties, therefore it should be carefully read
and observed.
Read and understand the information before making any
adjustment or maintenance.
The GLHAL disk harrow is simple to operate, requiring however
the basic and essential cautions to its handling.
Always keep in mind that safety requires constant attention,
observation and prudence during the harrowing, transportation,
maintenance and storage.
Have extreme caution when operating with the power take-off
(PTO). Do not get closer during operation.
5
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A. GLHAL
To the operator
Never use your bare hands to check hydraulic leaks, the high
pressure can cause several injuries.
Never attempt to change the adjustments, clean or lubricate the
equipment when the same is switched on or in movement.
Be careful while driving on slopes. Risk of overturn.
Prevent that chemical products (i.e.: fertilizers, treated seeds)
make any contact with your skin or clothes.
Keep access and work places clean and free from oil and
grease. Risk of accidents.
Never transport the equipment on highways or paved roads
during the night. Avoid that the tractor wheels touch the drawbar in
sharp turns.
The presence of any other people on the tractor or equipment
is stricly forbidden.
Have extreme caution when driving under electrical power lines.
Any contact may result in severe shocks, injuries or death.
For your protection and safety, always wear adequate clothes
and footwear while operating the equipment.
Always use the safety locks to transport the equipment.
6Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
GLHAL
To the operator
• Only trained and qualified personnel is allowed to operate the equipment.
• While working or during transportation, only the presence of the operator is
allowed on the tractor.
• Do not allow chidren to play near or over the equipment while it is operating,
during transportation or storage.
• Have full knowledge of the soil before starting to work. Provide the delineation
of obstacles or hazardous locations. Use the speed which is suitable to the
conditions of the ground or pathways to be covered.
• Use personal protective equipment (PPE).
• Wear appropriate clothes and footwear. Avoid clothes that are either loose or
hanging from the body, which may become entangled in moving parts.
• Never operate the equipment without its proper protective devices.
• Be careful while hitching the traction bar to the tractor.
• Be careful when transporting the harrow on the third point.
• Wear protective gloves to work near the disc blades.
• When setting the harrow to transport position, check if there are no people or
animals close or under it.
• Never attempt to change the adjustments, clean or lubricate the equipment
while it is moving.
• In case of emergency, know how to stop the tractor and harrow quickly.
• Always shut down the engine, remove the key and use the handbrake before
leaving the tractor seat.
• Only drive the equipment using tractors with appropriate power.
• Carefully check the transport width on narrow locations.
• Whenever you unhitch the equipment, either in the field or shed, do it on a
flat and firm surface and use the parking stands. Make sure the equipment is
properly supported.
• Please check the general safety instructions on the back of this manual.
7
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A. GLHAL
Truck or trailer transportation
Marchesan does not advise the equipment traffic on highways, because this
practice involves serious security risks in addition to being prohibited by the
current existing traffic law. The transportation for long distances should be done
on truck, trailer or others by following these safety guidelines:
• Use adequate ramps to load or unload the equipment. Do not make the loading
on ditch banks, it can cause a serious accident.
• When lifting with a hoist, use the appropriate points to lift.
• Fasten the moving parts that may get loose and cause accidents.
• Underpin the equipment appropriately.
• Use chock blocks and safety chains to secure the equipment to the truck or trailer
during the transport.
• After 8 to 10 km transporting, please inspect the load condition. Repeat this
procedure every 80 to 100 km. Give more attention when transporting the
equipment on rough roads, slopes and other adverse conditions.
• Always be careful with the load height, especially when passing under electrical
power lines, bridges and others.
• Check all laws and regulations regarding the height limits and load width while
transporting the equipment on truck or trailer. If necessary use banners, lights
and other devices in order to give adequate warning to the other drivers.
To the operator
8Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
GLHAL
The safety stickers warn about the equipment points that require more attention and
they should be kept in good repair. If these stickers become damaged or illegible, replace
them. Marchesan provide stickers, upon request and indication of the respective serial
number.
To the operator
ATENÇÃO
ATTENTION
ATENCIÓN
05.03.03.1428
Leia o manual antes de iniciar o
uso do equipamento.
Read the manual before attempting
to work with the equipment.
Lea el manual antes de iniciar el
uso del equipo.
Safety stickers
Adhesive label
Model Serial number
GLHAL 05.03.03.4235
TATU logo 05.03.03.4022
LUBRIFICAR E REAPERTAR DIARIAMENTE
LUBRICAR Y REAPRETAR DIARIAMENTE
L U B R I C AT E A N D T I G H T E N D A I L Y
05.03.03.1827
Tabla de contenidos
Otros manuales de Maquinaria agrícola de Tatu Marchesan
Tatu Marchesan
Tatu Marchesan RTA-6 Manual de usuario
Tatu Marchesan
Tatu Marchesan GAPCW 8013 Manual de usuario
Tatu Marchesan
Tatu Marchesan GAPCW-EP Manual de usuario
Tatu Marchesan
Tatu Marchesan PST Plus Manual de usuario
Tatu Marchesan
Tatu Marchesan PMT Manual de usuario
Tatu Marchesan
Tatu Marchesan TCA 13500 Manual de usuario
Tatu Marchesan
Tatu Marchesan GAPCR-HD 8013 Manual de usuario
Tatu Marchesan
Tatu Marchesan GNFH Manual de usuario
Tatu Marchesan
Tatu Marchesan PST4 Manual de usuario
Tatu Marchesan
Tatu Marchesan SDA3 Manual de usuario
Tatu Marchesan
Tatu Marchesan DCA2 2500 MC Manual de usuario
Tatu Marchesan
Tatu Marchesan PHP 3 Manual de usuario
Tatu Marchesan
Tatu Marchesan ATCR Manual de usuario
Tatu Marchesan
Tatu Marchesan ROAT2 1700 Manual de usuario
Tatu Marchesan
Tatu Marchesan GNL Manual de usuario
Tatu Marchesan
Tatu Marchesan GNF-E Manual de usuario
Tatu Marchesan
Tatu Marchesan GNLCR Manual de usuario
Tatu Marchesan
Tatu Marchesan GCRO 7010 Manual de usuario
Tatu Marchesan
Tatu Marchesan RC2E 4500 Manual de usuario
Tatu Marchesan
Tatu Marchesan GNACR Manual de usuario
Manuales populares de Maquinaria agrícola de otras marcas
GSi
GSi PNEG-2314 Manual de usuario
Checchi & Magli
Checchi & Magli TEXDRIVE Manual de usuario
Amazone
Amazone Cenius 4003-2TX Manual de usuario
MASSEY FERGUSON
MASSEY FERGUSON MF 9313S Manual de usuario
Cima
Cima BLITZ Instrucciones de funcionamiento y mantenimiento
Amazone
Amazone CombiDisc 3000 Instrucciones de instalación
