T&D TR-7xU Series Manual de usuario

2004.03 16004264150

User’s Manual

Thank you for purchasing our product.

Carefully read this instruction manual

before using this unit.

      

(603) 746-5524

www.MicroDAQ.com

Distributed by MicroDAQ.com, Ltd.

ⅰ

●All rights of this User’s Manual belong to T&D Corporation. It is prohibited to

use, duplicate and/or arrange a part or whole of this User’s Manual without

the permission of T&D Corporation.

●Microsoft® and Windows® are registered trademarks of Microsoft Corporation

USA and are binding in the USA and all other countries. Company names

and product names are trademarks or registered trademarks of each

company.

●Specications, design and other contents outlined in this manual are subject

to change without notice.

●On screen messages in this manual may vary slightly from the actual

messages.

●Please notify the shop where you purchased this product or T&D Corporation

of any mistakes, errors or unclear explanations in this manual. T&D Corporation

accepts no responsibility for any damage or loss of income caused by the use

of our product.

●This product has been designed for private or industrial use only. It is not for

use in situations where strict safety precautions are necessary such as in

connection with medical equipment, whether directly or indirectly.

●We are not responsible for any malfunction or trouble caused by the use of

our product or by any problem caused by the use of measurement results

of our unit. Please be fully aware of this before using our product.

●Some of our products, which come under the category of strategic goods in

foreign trade law, need the permission of the Japanese government to be

exported outside of Japan.

●This User’s Manual cannot be reissued, so please keep it in a safe place.

●Please read the warranty and provisions for free repair carefully.

■Notices about this User’s Manual

In order to properly use this product, please carefully read this manual before

using.T&D Corporation accepts no responsibility for any malfunction of and/or

trouble with this product or with your computer that is caused by the improper

handling of this product and will deem such trouble or malfunction as falling

outside the conditions for free repair outlined in the attached warranty.

Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524

ⅱ

■Escape Clauses

●T&D Corporation does not guarantee the operation of T&D Recorder

for Windows®.

●T&D Corporation shall not accept any responsibility for any damage,

whether direct or indirect, that results from the usage of T&D Recorder

for Windows.

●Specications of T&D Recorder for Windows may be subject to

change and service may be terminated without advance notice to the

user. In such a case, T&D Corporation shall not be responsible for any

damages, whether direct or indirect, from the inability to use T&D

Recorder for Windows.

●T&D Corporation has no obligation to correct any defects found in

T&D Recorder for Windows.

■Copyright

●The Copyright for T&D Recorder for Windows, including the program

and relevant documents, belongs solely to T&D Corporation.

●The reprinting or redistribution for commercial purposes whether in

part or in whole, in magazines or as a part of any product is strictly

forbidden without the expressed consent of T&D Corporation. Any

inquires concerning commercial redistribution should be directed to

the Sales Department of T&D Corporation.

●Please do not attempt to make any changes or modications to T&D

Recorder for Windows.

Software User Agreement

Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524

ⅲ

Introduction

●Software User’s Agreement........................ ⅱ

●What is T&D Recorder for Windows®？............. １

Getting Ready

●Getting Started:The Basic Operations .............. ３

●Installing the Software ............................ ５

●Using the Software ............................... ７

● Connecting the Data Logger to your Computer

・Connecting with USB Cable ..................... ９

・Connecting the USB cable to the TR-71U/72U unit .10

Basic Functions

●TR-71U/72U

・The Main Window ..............................11

・Starting Recording .............................12

・Downloading Recorded Data ....................14

・Other Functions................................16

Temperature ／Humidity Graph

●Display Names and Functions .....................25

●Graph Maintenance

・Changing the Method of Graph Display ...........29

・Operating the Graph............................35

Table of Contents

Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524

ⅳ

Other Functions

●Saving Recorded Data ............................37

●Creating Text File.................................38

●Opening Saved Files .............................39

●Reinstalling the Software ..........................40

Other

●Troubleshooting ..................................41

●Specications....................................45

Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524

１

What is T&D Recorder for Windows ?

◆An Overview

T&D Recorder for Windows is a software program that enables you to

easily make recording settings for our data loggers, download recorded

data from the loggers, and then process that data into graphs, tables and

/or save that data to les or print.Upon opening T&D Recorder for

Windows, a launcher program will appear with several icons lined up. By

clicking on an icon, a settings/communication display for the selected

type of device or a graph display will appear.

In order to use the software, the following operational environment is

necessary

OS Microsoft Windows 98/Me

Microsoft WindowNT 4.0 (USB communication not possible）

Microsoft Windows 2000/Xp

PC/CPU IBM Compatible Pentium 90MHz or above

USB Communication/Serial Communication(RS-232C D-Sub pin） possible

Memory 16MB or above

Hard Disk 4 MB or more of available space (more space necessary for data）

Monitor VGA (SVGA(800×600)or above)/256 or more colors possible is necessary

◆Basic Functions

●Recording Settings

Settings can be made for recording conditions such as channel name,

recording interval, and recording mode. By making a recording start (date

and time) setting in the main unit(s), the unit(s) will begin recording at

that time on that date.

●Graph Display / Printing

●Simultaneous Display of 8 Ch. of Data

It is possible to display up to 8 channels of downloaded data in 1 graph.

●Zoom-in on Data by Mouse

By simple mouse operations, you can easily zoom in and out on data as

well as change the display.

●View the High, Low, and Average Calculations for any Specied

Period

Make settings to specify the calculation range you desire and view the

high, low and average value for that range in each channel displayed in

the graph.

Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524

２

●Graph Printing

It is possible to print in full-color the graph as you see it on display.

●Data List Display / Printing

You can view the data displayed in the graph window as a list and then

choose to print.

●View in Easy to Distinguish Colors

In the data list, the highest value will appear in red, the lowest in blue,

and the average in pink.

●Printing the Data List

It is possible to print the entire list as displayed or to select pages for

printing.

●Creating Text File

It is possible to convert the data for a specied range (time period) to

common text le format (CSV type format), so that it can be exported to

spreadsheet software such as Excel or Lotus.

Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524

３

Getting Started: The Basic Operations

TR-71U/TR-72U

Connecting the Unit to your Computer

Connect the USB cable and set up so that the data logger and your

computer can commmuincate.

Installing the USB Device Driver

By installing the USB device driver, your computer will be able to

recognize a TR-71U/72U unit when it is connected. For more details about

how to install the driver, see the TR-71U/72U Hardware Manual.

Installing the Accompanying Software

After installing T&D Recorder for Windows , the「TR-71U/TR-72U Quick

Start Program」will automatically open each time you start up Windows.

Making Recording Start Settings

NOTE:

Before making Recording Start settings, make sure that your computer's

date and time are correct. If your computer's date and time are incorrect it

will have adverse effects on the starting time for recording.

Connect the USB cable and set up so that the data logger and your computer

can commmuincate.

Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524

Downloading Recorded Data

By making settings in [Detailed Settings] before downloading, you can

specify whether or not you wish to display a graph upon downloading, as

well as, specify le names for saving les.

NOTE:

Before making Recording Start settings, make sure that your computer's

date and time are correct. If your computer's date and time are incorrect it

will have adverse effects on the starting time for recording.

４

Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524

５

[Execute]

button

「Install T&D Recorder

for Windows」

●Is Windows operating properly ？

If Windows is not operating properly, T&D Recorder for Windows may not

be installed correctly or it may not operate properly.

●Please quit all other applications.

If other programs are open, please close and quit all of them, making sure

to quit all Quick Start programs such as a virus checker.

１.Open Windows.

２.Place the accompanying CD-ROM into your CD-ROM drive. In a few

seconds, the ｢Install Program｣ window will appear.

●If that window does not automatically open, please open it by double

clicking the CD-ROM icon in ｢My Computer｣ on your desktop.

３.Select [Install T&D Recorder for Windows] and click the [Execute]

button to start the installation.

４.To continue installation, follow the directions as they appear.

After installation has been completed the program

「T&D Recorder for

Windows｣ should appear in the [Start] Menu and the [TR-71U/72U

Quick Start ] will be registered in the [Start] Menu’s [Start up] Program.

Installing the Software

Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario