Tamam tadbir MIR 6000 Series Manual de usuario
MIR 6000
Controller and Data logger
Modules User's Manual
MIR 6000 Series
Controller and Data logger
Modules User’s Manual
Copyright Notice
This document is copyrighted, 2005, by Tamam tadbir Co., Ltd. All rights are
reserved. Tamam Tadbir Co., Ltd., reserves the right to make improvements to the
products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated or transmitted in
any form or by any means without the prior written permission of Tamam tadbir Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable.
However, Tamam tadbir Co., Ltd. assumes no responsibility for its use, nor for any
infringements upon the rights of third parties, which may result from its use.
Acknowledgments
MIR is a trademark of Tamam tadbir Co., Ltd.
IBM and PC are trademarks of International Business
Machines Corporation.
Edition 10.3
October. 2006
MIR-6030A 3-Channel analog input & 6-Channel
digital output controller and Data Logger
AI channel number 3
Input range
0-10VDC, 0/4-20MA DC , 0-5VDC
Output speed (in bps)
Maximum distance
RS-485 (2-wire)
38.4K
4000 ft. (1200 m.)
Accuracy ±0.5% or better
Zero drift ±6 μV/C
Span drift ±25 ppm/C
Isolation-rated voltage 3000 VDC
CMR @ 50/60 Hz 150 dB
NMR @ 50/60 Hz 100 dB
A/D resolution Error 0.1%
Sampling rate 1 samples/second Max
Input impedance Voltage: 2 MΩ, Current: 125 Ω
LED indicator 1 digit alarm
Digital output Sink
current Power
6 channels open collector to 30 V 300 mA
Watchdog timer 1.6 second (System)
Power supply +15 to +25VDC (non-regulated)
Power consumption 2 W @20 VDC
Burn-out detection Yes
MIR-6030AP 3-Channel analog input & 6-Channel
digital output controller and Data Logger,
Programmable for time variable set point
AI channel number 3
Input range
0-10VDC, 0/4-20MA DC , 0-5VDC
Output speed (in bps)
Maximum distance
RS-485 (2-wire)
38.4K
4000 ft. (1200 m.)
Accuracy ±0.5% or better
Zero drift ±6 μV/C
Span drift ±25 ppm/C
Isolation-rated voltage 3000 VDC
CMR @ 50/60 Hz 150 dB
NMR @ 50/60 Hz 100 dB
A/D resolution Error 0.1%
Sampling rate 1 samples/second Max
Input impedance Voltage: 2 MΩ, Current: 125 Ω
LED indicator 1 digit alarm
Digital output Sink
current Power
6 channels open collector to 30 V 300 mA
Watchdog timer 1.6 second (System)
Power supply +15 to +25VDC (non-regulated)
Power consumption 2 W @ 20 VDC
Burn-out detection Yes
MIR-6030B 3-Channel Dry,Wet bulb/analog input
& 6-Channel digital output controller and data logger
for temperature and humidity measurement and control.
AI channel number 3
Inputs
Two PT1000
One 0-10VDC, 0/4-20MA DC , 0-5VDC
Measurement Range
0-100 C
0-100% RH
Output speed (in bps)
Maximum distance
RS-485 (2-wire)
38.4K
4000 ft. (1200 m.)
Accuracy ±0.5% or better
Zero drift ±6 μV/C
Span drift ±25 ppm/C
Isolation-rated voltage 3000 VDC
CMR @ 50/60 Hz 150 dB
NMR @ 50/60 Hz 100 dB
A/D resolution Error 0.1%
Sampling rate 1 samples/second Max
Input impedance Voltage: 2 MΩ, Current: 125 Ω
LED indicator 1 digit alarm
Digital output Sink
current Power
6 channels open collector to 30 V 300 mA
Watchdog timer 1.6 second (System)
Power supply +15 to +25VDC (non-regulated)
Power consumption 2 W @ 20 VDC
Burn-out detection Yes
MIR-6030BP 3-Channel Dry,Wet bulb/analog input & 6-
Channel digital output controller and data logger for
temperature and humidity measurement and control,
Programmable for time variable set point
AI channel number 3
Inputs Two PT1000
Measurement Range
One 0-10VDC, 0/4-20MA DC , 0-5VDC
0-100 C
0-100% RH
Output speed (in bps)
Maximum distance
RS-485 (2-wire)
38.4K
4000 ft. (1200 m.)
Accuracy ±0.5% or better
Zero drift ±6 μV/C
Span drift ±25 ppm/C
Isolation-rated voltage 3000 VDC
CMR @ 50/60 Hz 150 dB
NMR @ 50/60 Hz 100 dB
A/D resolution Error 0.1%
Sampling rate 1 samples/second Max
Input impedance Voltage: 2 MΩ, Current: 125 Ω
LED indicator 1 digit alarm
Digital output Sink
current Power
6 channels open collector to 30 V 300 mA
Watchdog timer 1.6 second (System)
Power supply +15 to +25 VDC (non-regulated)
Power consumption 2 W @ 20 VDC
Burn-out detection Yes
MIR-6030C 3-Channel RTD,analog input / 6-Channel
digital output controller and Data Logger
AI channel number 3
Inputs
Two PT1000
One 0-10VDC, 0/4-20MA DC , 0-5VDC
Measurement Range
0to100 C
-50 to 50C ,0 to 500C
Output speed (in bps) RS-485 (2-wire)
Maximum distance 38.4K
4000 ft. (1200 m.)
Accuracy ±0.5% or better
Zero drift ±6 μV/C
Span drift ±25 ppm/C
Isolation-rated voltage 3000 VDC
CMR @ 50/60 Hz 150 dB
NMR @ 50/60 Hz 100 dB
A/D resolution Error 0.1%
Sampling rate 1 samples/second Max
Input impedance Voltage: 2 MΩ, Current: 125 Ω
LED indicator 1 digit alarm
Digital output Sink
current Power
6 channels open collector to 30 V 300 mA
Watchdog timer 1.6 second (System)
Power supply +15 to +25VDC (non-regulated)
Power consumption 2 W @ 20 VDC
Burn-out detection Yes
MIR-6030CP 3-Channel RTD,analoge input / 6-Channel
digital output controller and Data Logger Programmable
for time variable set point systems
AI channel number 2
Inputs One 0-10VDC, 0/4-20MA DC , 0-5VDC
Two PT1000
Measurement Range
0to100 C
-50 to 50, 0 to 500C
RS-485 (2-wire)
Output speed (in bps) 38.4K
Maximum distance 4000 ft. (1200 m.)
Accuracy ±0.5% or better
Zero drift ±6 μV/C
Span drift ±25 ppm/C
Isolation-rated voltage 3000 VDC
CMR @ 50/60 Hz 150 dB
NMR @ 50/60 Hz 100 dB
A/D resolution Error 0.1%
Sampling rate 1 samples/second Max
Input impedance Voltage: 2 MΩ, Current: 125 Ω
LED indicator 1 digit alarm
Digital output Sink
current Power
6 channels open collector to 30 V 300 mA
Watchdog timer 1.6 second (System)
Power supply +15 to +25VDC (non-regulated)
Power consumption 2 W @ 20 VDC
Burn-out detection Yes
MIR-6080A 8-Channel analog input monitoring
system and Data Recorder
AI channel number 8
Input range
0-10VDC, 0/4-20MA DC , 0-5VDC
Output speed (in bps)
Maximum distance
RS-485 (2-wire)
38.4K
4000 ft. (1200 m.)
Accuracy ±0.5% or better
Zero drift ±6 μV/C
Span drift ±25 ppm/C
Isolation-rated voltage 3000 VDC
CMR @ 50/60 Hz 150 dB
NMR @ 50/60 Hz 100 dB
A/D resolution Error 0.1%
Sampling rate 1 samples/second Max
Input impedance Voltage: 2 MΩ, Current: 125 Ω
LED indicator 1 digit alarm
Digital output Sink
current Power
one relay 30 V 300 mA
Watchdog timer 1.6 second (System)
Power supply +15 to +25VDC (non-regulated)
Power consumption 2 W @ 20 VDC
Burn-out detection Yes
Introduction
1-
2
MIR 6000 Series User’s Manual
1.1 Overview
The MIR Series is a set of intelligent sensor-to-computer
interface modules containing built-in microprocessor. They are
remotely controlled through a simple set of commands format and
transmitted in RS-485 protocol. They provide signal conditioning,
isolation, ranging, A/D and D/A conversion, data comparison,
and digital communication functions. Some modules provide digital
I/O lines for controlling relays .
Software Configuration and Calibration
By merely issuing a command from the host computer, you can
change an analog input module to accept several ranges of voltage input,
or RTD input. All of the module’s configuration parameters including
I/O address, HI and LO alarm,calibration parameters settings may be
set remotely.Remote configuration can be done by using the provided
menu-based software and calibration commands.
By storing configuration and calibration parameters in a nonvolatile
EEPROM, modules are able to retain these parameters in case of power
failure.
Watchdog Timer
A watchdog timer supervisory function will automatically reset the
MIR modules in the event of system failure. Maintenance is thus
simplified.
Power Requirements
The modules are designed for supplies power within the range
of +15to +25VDC. The power supply
ripple must be limited to 5 V peak-to-peak, and the immediate ripple
voltage should be maintained between +15and +25 VDC.
Este manual sirve para los siguientes modelos
8
Tabla de contenidos
