Tactacam SPOTTER LR Manual de usuario
INSTRUCTION
MANUAL
SPOTTER LR
WWW.TACTACAM.COM
SPOTTER LR
TACTACAM QUICK START GUIDE
CONGRATULATIONS ON YOUR NEW TACTACAM SPOTTER LR!
This is a Quick Start Guide to show you the basics of your Spotter LR Camera.
Visit Tactacam.com for the most up-to-date info about your Tactacam Spotter LR.
Make sure you register your camera within 10 days of purchase at:
https://www.tactacam.com/warranty-registration/
Follow us on Facebook, Instagram and Twitter for the latest updates from the
Tactacam team:
https://www.facebook.com/Tactacam
https://www.instagram.com/tactacam
https://twitter.com/tactacam
Submit your videos at https://www.tactacam.com/share/
(844) 482-2822
SPOTTER LR FEATURES & BENEFITS
GET TO KNOW YOUR TACTACAM
1. Light weight 9oz
2. Easy quick connect
attachment
3. Adjustable HD screen
4. 4k resolution
5. Optic and Digital zoom
6. Wi-Fi to Spotter LR APP
for easy sharing
3
1
TACTACAM SPOTTER LR
FEATURES
4
What microSD requirements does my camera have?
Please use a microSD card that meets the following specications:
1. Use a U3 speed SD card with your Spotter LR
2. Spotter LR supports 32-128GB memory cards.
3. After connecting to Tactacam Spotter LR APP, we recommend formatting
the card by going to the “Menu > Other Settings-> Format SD Card”.
4. Recommended micro SD cards. (see below)
TACTACAM - SPOTTER LR
5
6
2
WWW.TACTACAM.COM
You should see the following.
· SD card slot
· USBType-C port (Charging and Downloading)
· Micro HDMI Port
· Removable battery
SPOTTER LR
TACTACAM QUICK START GUIDE
Before you start lming, charge your Spotter LR completely.
On the bottom of the camera open the two doors to access the components listed below.
1
1
2
3
4
4
3
2
(844) 482-2822
CHARGE YOUR TACTACAM
SPOTTER LR
With the bottom doors open you will see the USB C charging port and
the SD card slot. Using the included USB C cord, plug your Spotter
LR into a wall outlet.
You will see the solid red light
illuminate on your Tactacam
Spotter LR it will remain lit
until your camera is fully
charged. When the light
has shut off, unplug your
Tactacam Spotter LR.
USB C
You can also charge your Tactacam Spotter LR Battery with the
Tactacam Dual Battery Charger (sold separately).
WWW.TACTACAM.COM
CONNECTING YOUR TACTACAM
OPERATING THE SPOTTER LR
1. Push the Power button. You will see a
green light around the Power button. (The
green LED light will be blink when the
Tactacam is recording.)
2. Screen Orientation
With the camera ON push the menu button.
You will see the camera’s quick menu.
Select Screen Flip to properly orientate your
display. (Push OK (Power button) to make a
selection) and Exit.
3. To start recording, the camera should be
powered ON, push the power button again,
you will see the Green light start to blink.
There is also a RED visual on the top right of
the Spotter LR screen. RED record icon will
be blinking
NOTE: If light does not begin to ash, make
sure your SD Card is installed, formatted,
and not lled with videos.
4. Pause your recording by pushing the
Power button, you will see the blinking Green
light change to a solid green light around the
power button.
5. To power your camera off completely,
push and hold the Rec/Power button
for 5 seconds.
(844) 482-2822
GETTING TO KNOW YOUR TACTACAM
Other Camera Tips
ZOOM - When previewing or recording you can zoom in and out by
pushing the buttons on the left and right side of the power button.
MENU - With the camera on and not recording, you can access the
cameras Menu by pushing the menu button on the back of the camera.
WI-FI - With the camera on and not recording you can turn on the
cameras Wi-Fi by pushing and holding the bottom left Wi-Fi button
on the back of the camera for 3 sec. You will need to download the
Tactacam Spotter LR APP from the iOS or Android app stores.
Mounting Spotter LR to your scope
1. Select the proper spacer for your spotting scope.
2. Attach the adapter to the Spotter LR
3. Slide the Spotter LR and adapter over the spacer
4. Clamp the adapter tight to the spacer and scope
OPERATING THE SPOTTER LR
WWW.TACTACAM.COM
REFORMATTING YOUR CARD
GETTING TO KNOW YOUR TACTACAM
SD Card info
Always use the recommended SD Card for your camera. Tactacam Spotter
LR requires UHS Speed Class 3 (U3) to deliver the necessary write speed
for cameras like the Tactacam that can shoot 4K and high-bitrate video. U3-
certied SD cards must be able to maintain a minimum write speed of 30MB/s
to ensure that recording continues smoothly without any dropped frames. You
can use up to a 128GB card with the Tactacam Spotter LR.
Note:You should always format your SD Card before using it in your
Tactacam for the rst time or after it has been used in any other device. Only
use high quality micro SD Cards. Tactacam SD Cards, Lexar, or SanDisk
Ultra
Please see more info on SD Cards at tactacam.com/support
(844) 482-2822
REFORMATTING YOUR CARD
GETTING TO KNOW YOUR TACTACAM
Use one of the following methods to access videos located on your micro SD Card.
1. Using the provided USB C cord, connect your Tactacam to your computer.
Power your camera on to allow the computer and camera to communicate. You will
see an icon on your computer desktop (usually named TACTACAM). Open it, any
videos taken with your Tactacam Spotter LR will be in the “Video” folder.
OR
2. Remove your micro SD Card from your Tactacam Spotter LR and insert the
micro SD Card into the provided micro SD Card adapter. Insert the micro SD Card
adapter into your SD Card reader on your computer.
Format your SD Card.
When you Format a SD Card it will erase all data on the SD card. If you need
assistance reformatting your SD card see the following:
For a Mac:
Visit tactacam.com/support and to see video “SD Card Reformat on a
Mac Computer” for full detailed instructions
For a PC:
Visit tactacam.com/support and to see video “SD Card Reformat on a
Windows Computer” for full detailed instructions
Notes: It is best to format your SD Cards before using. Only use the
recommended SD Cards for Tactacam Spotter LR cameras. For a list of the
recommended micro SD Cards, visit tactacam.com/support
Use care when handling memory cards. Avoid liquids, dust, and debris. As a
precaution, power off the camera before inserting or removing the SD card.
Check manufacturer’s guidelines regarding usage in acceptable temperature
ranges.
WWW.TACTACAM.COM
CONNECTING TO WI-FI
DOWNLOADING THE TACTACAM APP
Wi-Fi This setting lets you connect your camera to the Tactacam Spotter LR App for
mobile remote connection. When Wi-Fi is on, a blue LED appear by the Wi-Fi status
icon just in front of the rec/power button. The blue Wi-Fi LED will blink when not
connected for 1 min then power itself off. Once connected the blue LED will go solid.
The Wi-Fi will remain on throughout the lifetime of the battery.
1. Downloading the Tactacam Spotter App:
Download and open the Tactacam Spotter APP from your App store on your Phone
or Tablet. Follow the App’s on-screen instructions.
2. Connect to your Tactacam Spotter LR
To turn on your Tactacam Spotter LR Wi-Fi: While your Tactacam Spotter LR is in
pause mode push and hold the Wi-Fi Button for 3 seconds. You will see the blue
LED indicator light turn on and start blinking.
3. From your mobile device’s Wi-Fi setting select the Spotter LR Wi-Fi network. (The
default password for your Spotter LR Wi-Fi. Is ( 1234567890 ) When connected, the
blinking blue LED light will become solid blue.
4. Open the Tactacam Spotter App.
5. Turn Wi-Fi Off - Press and hold the Wi-Fi button for 3 seconds. This will turn off your
Wi-Fi and disconnect you from your mobile device.
Date Time - Automatic
1. Your camera’s date and time are automatically set when you connect your camera to
the Tactacam Spotter App.
See video tutorials at tactacam.com/support
Tabla de contenidos
Otros manuales de Cámara digital de Tactacam
