SYSMEX XW-100 Manual de usuario

XW™-100 AUTOMATED HEMATOLOGY ANALYZER

CLIA WAIVED

START-UP QUICK GUIDE

BEYOND A BETTER BOX™

Code No. AD794857 en-am

PRINTED IN JAPAN

Date of Issue: 11/2017

Document Version: 2.0

Software Version: Ver.1© SYSMEX CORPORATION 2017

X W-100 S TA RT-UP

3. Remove the XW-100 and Power Cord from Box 2.

4. Connect the Power Cord to the XW-100 by inserting it into the socket

in the back.

5. Insert the Power Cord into a 3-prong outlet.

(Continued on next page)

SAFETY WARNINGS:

• The XW-100 weighs approximately 38 lbs.; DO NOT try to lift it

without help.

• Install the instrument with the following clearance, for ventilation:

• At least 6 inches at the front and sides.

• At least 12 inches at the back.

• DO NOT place anything on, bend, kink, or pull the Power Cord.

• Improper grounding of the instrument can cause electrical shock.

• The printer head can get very hot. DO NOT touch! Only use

paper recommended by Sysmex.

Start-up

1. Choose a convenient work space:

• Near an internet connection (provided Ethernet cable is 6.6 feet long) and a 3-prong power outlet

(provided power cord is 6.6 feet long).

• Ensure the space is level, dry, dust-free, and protected from splashing water.

• Avoid installation within 1 foot of devices that may cause potential interference, such as radios, computers,

and wireless devices.

• Environmental conditions:

• Ambient temperature: 15 - 25 oC or 59 - 77 oF

• Relative humidity: 30% - 85%

2. Unpack the XW-100. Ensure that the Start-up Quick Guide is present and perform a parts check on the boxes

that arrive with the analyzer:

Box 1: (open rst)

• Reagent Tray

• Thermal Paper

• Waste Bottle

• Adapters (Green and White)

• Clinician's Quick Guide

• Operator's Quick Guide

• Shutdown Quick Guide

• Technical Specications

Box 2:

• Power Cord

• Ethernet Cable

• Barcode Reader and Cable

• Reagent Tubing

• COIL TUBE SS-10

• Instructions for Use

X W-100 S TA RT-UP

7. Switch the Power button to the "I" position (as opposed to

the "O" position), to turn on the XW-100.

8. Follow the instructions on the

screen to complete the setup; when

requested, insert the Ethernet Cable

plug into the network socket.

9. During Initial Setup, the system will instruct the user to scan the

barcode on the Quick Reference Guide. Use the barcode below to

do so. If the Barcode Reader is working properly, the screen will

react.

664369 10197 8

Start-up, continued from previous page

6. Insert the plug end of the Barcode

Reader cord into the "BR" plug on the

side of the XW-100.

Program availability varies by location. Programs and specification subject to change without notice.

Sysmex America, Inc.

577 Aptakisic Road

Lincolnshire, IL 60069, U.S.A.

Tel. +1 (800) 379-7639

www.sysmex.com/us

Sysmex Corporation

1-5-1 Wakinohama-Kaigandori

Chuo-ku, Kobe 651-0073, Japan

Otros manuales para XW-100

Otros manuales de Instrumento de medición de SYSMEX

SYSMEX

SYSMEX CyFlow Ploidy Analyser Manual de usuario

SYSMEX

SYSMEX XE-5000 Manual de usuario

SYSMEX

SYSMEX CyFlow Space Manual de usuario

SYSMEX

SYSMEX BK265455 Manual de usuario

SYSMEX

SYSMEX XW-100 Manual

SYSMEX

SYSMEX XW-100 Manual de usuario

SYSMEX

SYSMEX CyFlow Ploidy Analyser Manual de usuario

SYSMEX

SYSMEX CyStain VitalCount Manual de usuario

SYSMEX

SYSMEX SF-3000 Manual de usuario

SYSMEX

SYSMEX pocH-100i Manual de usuario

SYSMEX

SYSMEX CyFlow Cube 6 V2m Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario