Syris SYRD245-1N-N Manual de usuario
SYRD245-1N-N
2.45 GHz RFID Network Reader
User Manual
Version 1.2
2008/10/23
http://www.xtive.com.tw/
SYRD245-1N-N active RFID Network Reader User Manual
1
Ⅰ. Product Specification
Communication 2.45 GHz Support read and write
Frequency 2.40~2.48 GHz
Channel
316
Address
65536
RSSI
0-255
LQI 0-255
Programmable
Set Parameter
LED Multi-LED visual indication
Ethernet 10/100 base-T Ethernet (RJ-45)
RS-232 RX, TX
Protocols
ICMP, ARP, IP, TCP(Server/Client), UDP, DHCP,
HTTP
Baud Rate
2,400 bps ~ 115,200 bps
Power Input
7.5 VDC ~ 28 VDC
Action Current
MAX 300 mA @ 12 VDC
Operating Temperature
-20
o
C to 65
o
C, 5 to 95%RH
Storage Temperature
-30
o
C to 85
o
C, 5 to 95%RH
Dimension
107W x 138H x 30D (mm)
http://www.xtive.com.tw/
SYRD245-1N-N active RFID Network Reader User Manual
2
Ⅱ. The Diagram of the System Connection
SYRD245-1N-N Network Reader can connect with 3 different interfaces：
RJ-45 ,RS-232 and RS-485.
SYRD245-1N-N connection to PC
http://www.xtive.com.tw/
SYRD245-1N-N active RFID Network Reader User Manual
3
SYRD245-1N-N connection to RS-485
http://www.xtive.com.tw/
SYRD245-1N-N active RFID Network Reader User Manual
4
Ⅳ. Setup MDNET-2
1. Click on Search Button, showing that the program is searching for network
module connected to this network.
http://www.xtive.com.tw/
SYRD245-1N-N active RFID Network Reader User Manual
5
2. After the search is finished, all network module found will be shown in the
right panel of the window. If you locate more than one module connected
to this network, refer to the MAC address on the module(s) to determine
which modules are the ones you wish to configure.
3. Double click selected network module you wish to configure, the
Configuration window will open.
http://www.xtive.com.tw/
SYRD245-1N-N active RFID Network Reader User Manual
6
4. The Configuration window has 6 tabs: Basic, Network, Operating Mode,
Accessible IPs, Password and Serial.
5. Basic: You can set Device Name here.
6. Network: You must assign a valid IP address to network module before it
will work in your network environment. Your network system administrator
should provide you with an IP address and related settings for your
network. The IP address must be unique within the network. You can
choose from 2 possible IP Configuration modes: Static, DHCP.
Method Function Definition
Static User defined IP address, Netmask, Gateway.
DHCP DHCP Server assigned IP address, Netmask,
Gateway and DNS
http://www.xtive.com.tw/
SYRD245-1N-N active RFID Network Reader User Manual
7
7. Serial: You should set up network module serial parameters as below
diagram.
http://www.xtive.com.tw/
SYRD245-1N-N active RFID Network Reader User Manual
8
8. Operating Mode:
Three different Socket Modes are available: TCP Server, TCP Client, and
UDP mode. The main difference between the TCP and UDP protocols is
that TCP guarantees delivery of data by requiring the recipient to send an
acknowledgement to the sender. UDP does not require this type of
verification, making it possible to offer speedier delivery. UDP also allows
multicasting of data to groups of IP addresses.
http://www.xtive.com.tw/
SYRD245-1N-N active RFID Network Reader User Manual
9
Ⅵ. TCP Server Mode
In TCP Server mode, SYRD245-1N-N reader
provides a unique IP:Port address on a TCP/IP
network. SYRD245-1N-N reader wait passively to
be contacted by the host computer, allowing the
host computer to establish a connection with and
get data from the serial device.
1. Setting Operating Mode
Select “TCP Server Mode” and press “OK” to submit the settings.
http://www.xtive.com.tw/
Otros manuales de Lector de tarjetas de Syris
Syris
Syris SYRDT5-B Manual de usuario
Syris
Syris SYRDK5 Manual de usuario
Syris
Syris SYRDT5-B Manual de usuario
Syris
Syris SYSR86N-HBX1 Manual de usuario
Syris
Syris SYSR86N-HBX1 Manual de usuario
Syris
Syris SYUR03N-U1 Manual de usuario
Syris
Syris SYRD245-1W Manual de usuario
Syris
Syris SYRDS1 Manual de usuario
Syris
Syris RD200-MIC Manual de usuario
