Sylvac S-Mike PRO Manual de usuario

Instruction manual

Manuel d’instruction

Handbuch

Manuele d’uso

Instrucciones de uso

S_Mike PRO

Force/Force/Messkraft/Forza/Fuerza

Measuring force adjustement

Only on model 0-30mm

Ajustage de la force de mesure

Uniquement pour modèle 0-30mm

Einstellbare Messkraft

Nur für Modell 0-30mm

Regolazione della forza di misurazione

Solo per il modello 0-30mm

Ajuste de la fuerza de medición

Solo para modelos de 0-30mm

1. Maintenance

Store the instrument in a dry place to avoid corrosion of metal parts if

not used for a long time.

Do not press the movable key on the anvil: leave a gap of 1-2mm when

the instrument is not in use.

Do not use aggressive products (alcohol, trichloroethylene or other

aggressive liquids) to clean plastic parts.

Do not store the instrument in a place exposed to sunlight, heat or

humidity.

Important: in the event of liquid splashes, wipe off the metal parts

of the instrument to ensure proper mechanical operation and avoid

corrosion problems.

2. General description

The micrometer is equipped with a Smart Inductive Sensor (SIS)

which maintains the reference position even when the instrument is

in standby mode. Its non-rotating button principle enables rapid posi-

tioning. It features the following operating characteristics:

• Enter preset value.

• Change unit (mm / INCH).

• Measured value transmission via Proximity or Bluetooth®

connection (depending on model).

• Protection against dust ingress and liquid splashes (oil, water) to

IP67 (IEC 60529).

12 7

3 5 64

1511

1. Measuring spindle

2. Anvil

3. Isolate plate

4. MODE button

5. Favourite button

6. SET button

7. Rotating thimble

8. Proximity connector

9. Battery cover

10. Low battery indicator

11. Value hold indicator

12. Data transfer indicator

13. Locking indicator

14. Bluetooth® indicator

15. Fmin mode indicator

3. Instrument features

The instrument has 2 operating modes: basic func-

tions (with direct access) and advanced functions.

In addition to the conﬁguration functions, you can select the

HOLD function or activate the keyboard lock (LOC function). You

can also activate the FMIN function (see chap. 6).

The «favorite» button assigns direct access to the most

frequently used function (see chap. 10).

The «SET» button allows you to assign a preset va-

lue, quit a selection, and manage instrument switch-off.

By default, SIS mode enables automatic switch-off without loss of

origin (see chap. 11).

Customizing functions

You can activate or deactivate certain instrument functions via Power

RS/USB or Bluetooth® cables (see chap. 13).

Data transmission parameters

4800Bds, 7 bits, even parity, 2 stop bits.

SET

MODE

4. Start-up, initialization

Press a button.

The instrument displays «SET» to initialize the reference point. Return

the movable key to the anvil (or to a master gauge). Then press .

The instrument is now ready for use (check preset value, correct if

necessary and reset).

SET

Next digit 0...9 save PRESET

PrE : Preset value input

bt : Bluetooth®. Activate/deactivate, reset Bluetooth® module or

display MAC address (depending on model).

5. Basic functions

Each short press gives direct access to basic functions:

MODE

SET MODE

MODE

SET MODE

MODE

SET

MODE

SET MODE

MODE

bt Off rESEt

SET

MAC On

6. Avanced functions

A long press (<2s) on accesses the advanced functions. Each short

press then accesses the desired function:

MODE

SET MODE

MODE

SET

MODE

Unit : Unit selection (mm or inch).

OFF : Automatic switch-off mode.

MAn : disabled. Auto : active (after 10min. by default).

bt.CFG : Bluetooth® proﬁle selection (see chap. 9 for details). The + symbol

indicates the active proﬁle (depending on model).

HoLd : Select On to activate display freeze when brieﬂy pressing .

Loc : Keypad lock. Only the favorite key remains active (to deactivate keypad

lock, press for 5 sec).

FMin : Activate FMIN function (see chap. 7 for details)

MODE

SET

MODE

SET MODE

MODE

SET

MODE

Next digit 0...9 save FMIN

MODE

SET MODE

MODE

SET

MODE

SET MODE

Without any pressure (after 5s): return to measuring mode (15s for preset

entry)

OFF . MAn:Mode d’extinction automatique = désactivé,

Auto = actif (après 10min. par défaut)

7. FMIN function (depends on model)

The high-speed micrometer features a spring-loaded spindle. This

construction ensures high repeatability, thanks to the constant force

in the measuring zone.

When the FMIN. mode is active, the minimum measuring value is auto-

matically stored and displayed.

The FMIN stroke value can be set by the user according to his needs

(0.010mm to 5.080mm depending on model).

Refer to chapter 6 to activate/deactivate or set the FMIN function.

Start measurement

Measurement

As long as the contact

points are in the FMIN

zone, the value displayed

remains unchanged.

If the contact points are

outside the FMIN range,

the value corresponding

to the actual spindle posi-

tion is displayed.

Example : Part Ø5.0mm Zone FMIN

5.225

5.000

DYNFMIN

FMIN

5.000

5.450

8. Proximity connection (Non-Bluetooth®

instrument only)

The instrument features a non-contact data output for direct connec-

tion to a PC or printer via a Proximity cable.

By default, a short press on the button transmits the current value.

The data transmission indicator is brieﬂy displayed. Sending data can

also be requested by the peripheral device (see chap. 15. List of main

commands).

9. Bluetooth® conﬁguration (Instrument

Bluetooth® only)

The connection procedure has been designed to be as simple as pos-

sible, and is distinguished by the 3 states below:

1. Symbol off.......... disconnected mode.

2. Symbol blink...... discovery mode.

3. Symbol on........ connected mode.

ThefollowingoptionscanbeselectedtocontroltheBluetooth®module.

On Activate Bluetooth® module (start discovery mode).

OFF Deactivate Bluetooth® module (terminate active connection).

rESEt Clear Matching information.

MAC Display MAC (Media Access Control) address.

Three Bluetooth® proﬁles are available.

SIMPLE Unpaired proﬁle (default).

PAIr Paired and secured proﬁle.

HId Virtual keyboard mode (compatible with recent equipment

without driver installation).

Note:

Bluetooth® Matching information is deleted when the proﬁle is

changed.

MODE

SET MODE

Tabla de contenidos

Idiomas:

Otros manuales de Instrumento de medición de Sylvac

Sylvac

Sylvac S Dial Mini Manual de usuario

Sylvac

Sylvac S Dial WORK Manual de usuario

Sylvac

Sylvac SYLVAC-SCAN S145 Manual de usuario

Sylvac

Sylvac UL 4 Manual de usuario

Sylvac

Sylvac PS15 Manual de usuario

Sylvac

Sylvac S Dial WORK Smart Manual de usuario

Sylvac

Sylvac PS16 V2 Manual de usuario

Sylvac

Sylvac S Cal EVO Standard Manual de usuario

Sylvac

Sylvac SCAN 52 Manual de usuario

Sylvac

Sylvac UL 4 Manual de usuario

Sylvac

Sylvac SYLVAC-VISIO 300 GL Manual de usuario

Sylvac

Sylvac D104-PC Manual de usuario

Sylvac

Sylvac S Depth PRO Manual de usuario

Sylvac

Sylvac EVO Bluetooth Manual de usuario

Sylvac

Sylvac Scan Series Manual de usuario

Sylvac

Sylvac S_Cal EVO Manual de usuario

Sylvac

Sylvac Hi Cal 150 Manual de usuario

Sylvac

Sylvac S Mike IP67 Manual de usuario

Sylvac

Sylvac Hi Cal Manual de usuario

Sylvac

Sylvac SCAN F60 Manual de usuario

Sylvac

Sylvac Hi Cal Manual de usuario

Sylvac

Sylvac 810.9707 Manual de usuario

Sylvac

Sylvac SCAN F60 Manual de usuario

Sylvac

Sylvac S_Dial WORK ANALOG Smart Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario