Switel DF150 Series Manual de usuario

Low radiation cordless DECT/GAP telephone

Operating Intructions

DF150x

Safety Information

1 Safety Information

Please read this operating instruction manual thoroughly.

Intended use

The telephone is suitable for telephoning within a public telephone network system. Any

other use is considered unintended use. Unauthorised modification or reconstruction is not

permitted. Under no circumstances open the device or complete any repair work yourself.

Installation location

Prevent excessive exposure to smoke, dust, vibration, chemicals, moisture, heat and direct

sunlight.

Do not use the handset in potentially explosive areas.

Power adapter plug

Attention: Only use the power adapter plug supplied because other power sup-

plies could damage the telephone. Ensure access to the power adapter plug is

not obstructed by furniture or such.

Rechargeable battery pack

Attention: Never throw batteries into a fire. Only use batteries of the same type.

Pay attention to correct polarity. Incorrect polarity of the batteries represents a

risk of explosion during charging.

Power failure

The telephone cannot be used to make calls in the event of a power failure. Always keep a

wired telephone which operates without an external power supply available in case of

emergency situations.

Medical equipment

Attention: Never use the telephone in the vicinity of medical equipment. Effects

on such equipment cannot be fully ruled out.

DECT1telephones can cause an unpleasant humming sound in hearing aids.

1DECT: Digital Enhanced Cordless Telecommunication = Standard for cordless telepho-

nes.

Preparing the Telephone

Disposal

In order to dispose of your device, take it to a collection point provided by your

local public waste authorities (e.g. recycling centre). According to laws on the

disposal of electronic and electrical devices, owners are obliged to dispose of old

electronic and electrical devices in a separate waste container. The adjacent

symbol indicates that the device must not be disposed of in normal domestic

waste!

Risks to health and the environment from batteries!

Never open, damage or swallow batteries or allow them to pollute the envi-

ronment. They could contain toxic and ecologically harmful heavy metals.

You are legally obliged to dispose of power packs and batteries at the point

of sale or in the corresponding containers provided at collection points by

local public waste authorities. Disposal is free of charge. The above sym-

bols indicate that the batteries must not be disposed of in domestic waste

and that they must be disposed of at an authorised collection point.

Packaging materials must be disposed of according to local regulations.

2 Preparing the Telephone

Safety information

Attention: It is essential to read the Safety Information in Chapter 1 before start-

ing up.

Checking the package contents

The package contains:

Content Model DF150x

1501 150211503115041

Base station with power adapter plug 1 1 1 1

Charging station with power adapter plug − 1 2 3

Handset 1 2 3 4

Telephone connection cable 1 1 1 1

Rechargeable battery pack 1 2 3 4

Operating instructions 1 1 1 1

1Visit www.switel.com to find out whether the telephone/telephone set is already available.

Preparing the Telephone

Connecting the base station

Attention: Position the base station at least 1 m away from other electronic de-

vices, otherwise there is a risk of mutual disturbance.

Connect the base station as illustrated in the diagram. For reasons of safety, only use the

power adapter plug and telephone connection cable supplied.

Mains power

outlet Telephone line socket

For the base station, use the power adapter plug labelled SSA−5AP−09 EU

060021 and rated at 6 V DC, 210mA.

Important information

The telephone base station is equipped with an energy−efficient switching power supply

SSA−5AP−09 EU 060021 (input 100~240 VAC, output 6 VDC, 210 mA). The zero load is ap-

prox. 0.11 W. The average efficiency is approx. 65.2%. The power consumption of the base

station is:

− in operation (standby/talking): approx. 0.49 W, approx. 0.63 W

− when charging the handset: approx. 0.74 W

The charging station(s) supplied with the telephone set is/are equipped with an energy−effi-

cient switching power supply SSA−5AP−09 EU 060021 (input 100~240 VAC, output 6 VDC,

210 mA). The zero load is approx. 0.11 W. The average efficiency is approx. 65.2%.

The power consumption of the charging station is:

− without handset: approx. 0.11 W

− when charging the handset: approx. 0.4 W

Inserting the battery pack

Slidethebatterycompartmentcoverdownwardsand

thenremove it. Connect theplugonthebatterypack

in the socket in the battery compartment. Insert the

battery packin the battery compartment. Only use

the battery pack supplied. Pay attention that the

cable is not jammed. Replace the cover back on the

battery compartment and slide it upwards until it

snaps into place.

Preparing the Telephone

Charging the batteries

Before the handset is used for the first time, insert it in the base/charging station

for at least 15 hours.

When the handset is properly inserted in the base station / charging station, you will hear an

acoustic signal. The handset warms up during the charging process. This is normal and

does not represent a risk. Do not charge the handset with charging units from other manu-

facturers.

The current battery charge status is indicated in the display:

Full Half empty Low Empty

Setup mode

When you first start up and after every reset, the unit will be in setup mode. Follow the in-

structions displayed to choose a country and language and to set the date and time.

WELCOME GStart Setup

SET COUNTRY K/LSelect a country

G, CONFIRM? GConfirm

WAITING...

SET LANGUAGE K/LSelect a language

GConfirm

Set Date ËGSet date and confirm

SET TIME ËGSet time and confirm

In setup mode, the language of display texts will change as you select a country.

Setting the time and date on the handset

The time and date are set via the menu. Refer to Page 14 for the sequence of menu option

selections. If AUTO CLOCK ADJ is enabled, the CLIP function will automatically receive

and update both date and time.

Automatic answering (Auto answer)

If this function is activated, an incoming call is taken when the handset is removed from the

base/charging station. Use the menu to activate or deactivate this function. Refer to

Page 14 for the sequence of menu option selections.

Private branch exchanges

The information on Page 16 explains how to install your telephone in a private branch ex-

change.

Low−radiation operation (ECO mode)

The level of radiation is considerably lower than that of standard DECT cordless

telephones when in Standby mode (when the handset is in the charging station).

In talk mode, radiation is reduced (depending on the distance between

the handset and base station).

Operating Elements

3 Operating Elements

The buttons in this operating manual are subsequently depicted with a uniform contour.

Therefore, slight deviations in the appearance of the symbols on the telephone buttons

compared to those depicted here are possible.

Handset

1 Loudspeaker

2 LC display

3 Back / delete /

internal calls

4 On−hook button / Standby mode /

handset on/off

5 Navigation buttons /

phone book / calls list

6 Digit keys

7 # button / ringing tone on/off /

dialling pause

8 Redialling

9 Microphone

10 Handsfree button

11 Muting button

12 * button

Key lock

13 Call button / R−button

14 Menu button / OK

15 LED: new calls / messages

Base station

16 Charging contacts

17 Paging button

Preliminary Information

4 Preliminary Information

This chapter provides basic information on using the operating instruction manual and the

telephone.

Description of operating sequences in the manual

Display Description

eDisplays the contour of buttons

gPress the button depicted briefly

3 sec. #Press the button depicted for 3 seconds

ëEnter digits or letters

{í}Handset rings

èRemove the handset from the base station

éPlace the handset in the base station

BS SETTINGS Texts which appear in the display

Icons and texts in the handset display

Icon Description

vOn: Indicates the battery charge status.

Animated segments: The batteries are being charged; Page 5.

1Internally assigned call number of the handset; Page 18.

12:03 01/01 Display of time and date; Page 14.

qOn: A call is currently being made.

Flashing: A call has been received; Page 11.

uOn: There are calls on the calls list.

Flashing: New calls have been registered in the call list; Page 10.

XY There are further items/menu options. Press the K/ Lbutton

to display them.

SThe ringing tone has been switched off; Page 13.

rThe handsfree facility is activated; Page 13.

KEYS LOCKED The key lock function is activated; Page 13.

MUTE ON The microphone is deactivated (muted); Page 13.

wThe alarm clock is switched on; Page 14.

Preliminary Information

Icon Description

POn: The connection to the base station is good.

Flashing: The connection to the base station is interrupted. Move

nearer to the base station.

tAnswering machine provided in the telephone network. VMWI1− Sup-

plementary service offered by telephone network providers;

Page 17.

Standby mode

All descriptions in this operating manual assume that the handset is in Standby mode. This

is the case when you are not talking on the phone and if a menu is not open. Press the

Fbutton to return to Standby mode.

Energy−save mode

When the handset has been in Standby mode for some time, it automatically switches to

energy−save mode. The buttons and display no longer light up.

Navigating in the menu

All the functions can be accessed via the various menus. Refer to the Menu Structure

Page 14 for information on how to access each respective function.

GOpen the main menu

K/ LSelect a submenu

gOpen the submenu

K/ LSelect a function

GRun the function

K/ LSelect a setting

ëUse the keypad to enter figures or letters,

as necessary

GConfirm entries

HOne level back

FAbort all programming and saving and return to

Standby mode

Every process is automatically cancelled if there is no input within 30 seconds.

1VMWI: Visual Message Waiting Indication = Visual indicator that new messages have

been recorded.

Phone Book

Creating phone book entries − example

The way in which to navigate through the menus and select settings is explained by means

of the example Creating phone book entries. Proceed as in this example for all the set-

tings.

IOpen the phone book

gNEW ENTRY , GSelect submenu and confirm

ENTER NAME , GEnter a name (max. 12 characters) and confirm

ENTER NUMBER , GEnter the phone number (max. 24 digits) and

confirm

FAborts saving and returns the handset

to Standby mode

5 Phone Book

You can use the phone book to store up to 100 phone numbers together with the associated

names.

Always enter the area access code with the phone numbers so that incoming

local calls can also be assigned to a phone book entry.

When the memory capacity is used up, the message MEMORY FULL!

appears when an attempt is made to store another number. To create space, an

existing entry must first be deleted.

The phone book entries are arranged alphabetically. To access the required

phone book entry directly, press the first letters of the corresponding name.

Entering names

Letters are also imprinted on the digit keys. Letters, digits and special characters are en-

tered by pressing the relevant key the respective number of times.

1Enter a space

0Enter a special character

HDelete

I/ JMove the cursor

#Upper/lower case

To enter the same letter twice, press the button to enter the letter. Wait until the

cursor skips one position forwards. Enter the letter again.

Calls List

Editing phone book entries

IOpen the phone book

K/ LSelect an entry

GOpen the menu

K/L

EDIT ENTRY , GSelect submenu and confirm

ENTER NAME , GEdit the name (max. 12 characters) and confirm

ENTER NUMBER , GEdit the phone number (max. 24 digits) and

confirm

Deleting phone book entries

Deleting a single entry

IOpen the phone book

K/ LSelect an entry

GOpen the menu

K/LDELETE , GSelect submenu and confirm

CONFIRM? , Gor HConfirm or cancel deletion

Deleting all entries

IOpen the phone book

GOpen the menu

K/L

DELETE ALL , GSelect the submenu and confirm

CONFIRM? , Gor HConfirm or cancel deletion

6 Calls List

A total of 30 phone numbers are stored in a calls list.

The caller number display (CLIP1) is a supplementary service offered by your

telephone network provider. The caller’s number appears in the display if the ser-

vice is offered by your telephone network provider. Contact your network pro-

vider for further information.

Displaying numbers in the calls list

JOpen the calls list

K/ LSelect an entry

1CLIP: Calling Line Identification Presentation = Displays the caller’s phone number.

Este manual sirve para los siguientes modelos

Otros manuales de Teléfono de switel

switel

switel TC42 Manual de usuario

switel

switel TF550 Manual de usuario

switel

switel M 82 Manual de usuario

switel

switel TF550 Manual de usuario

switel

switel T9 Manual de usuario

switel

switel TC40 Manual de usuario

switel

switel DC 70x Manual de usuario

switel

switel TC 39 Manual de usuario

switel

switel TC 37 CLI Manual de usuario

switel

switel DE18X Manual de usuario

switel

switel TE6 Manual de usuario

switel

switel TE16 Manual de usuario

switel

switel TE8 Manual de usuario

switel

switel T19 Manual de usuario

switel

switel POWERTEL TF 520 Manual de usuario

switel

switel TE18 Manual de usuario

switel

switel TE9 Manual de usuario

switel

switel TE7 Manual de usuario

switel

switel DC55x Manual de usuario

switel

switel TF560 Manual de usuario

switel

switel CF 60 Manual de usuario

switel

switel TC 29 clip Manual de usuario

switel

switel DC631 Manual de usuario

switel

switel DC 60012 Combo Manual de usuario

Manuales populares de Teléfono de otras marcas

GE 2-9480 Manual de usuario

Geemarc

Geemarc PHOTOPHONE 155 Manual de usuario

D-Link

D-Link DWR-720/PW Manual de usuario

Interquartz

Interquartz Gemini IQ333 Manual de usuario

SSS Siedle

SSS Siedle HT 840-0 Manual de usuario

Motorola

Motorola TITANIUM Manual de usuario

Panasonic

Panasonic ICX Manual de usuario

LG H870DS Manual de usuario

Samsung

Samsung GT-I9500 Manual de usuario

AT&T

AT&T Trimline 205 Manual de usuario

Selta

Selta zenyth 600 Manual de usuario

Doro

Doro AFTI 20 Manual de usuario

UNIQCELL

UNIQCELL A1 Manual de usuario

Panasonic

Panasonic KX Series Manual de usuario

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manual de usuario

BT Decor 425 Manual de usuario

NEC

NEC SV8500 Manual de usuario

Teledex

Teledex PEARL Manual de usuario

switel DF150 Series Manual de usuario

Manuales populares de Teléfono de otras marcas