SwitchBot W2500020 Manual de usuario
文件名称: Keypad Touch-SMS-EN-2207
材质和工艺：
封面157g铜版纸、128g铜版纸，骑马钉
版本号: V2.2-2207
PT 2034C
设计师：WQY
成品尺寸：60*93mm
完成时间：2022/07/25
更改内容：1.修改文案内容 2.添加IC警语 3.更新版本
备注：红色线框不印刷
User Manual
Keypad Touch
Please read this user manual carefully before
using your device.
www.switch-bot.com
V2.2-2207
1. Package Contents --------------------------- 01
2. List of Components ------------------------- 03
3. Preparation ------------------------------------ 04
4. Getting Started ------------------------------- 05
5. Safety Information -------------------------- 06
6. Installation ------------------------------------- 07
7. Keypad Touch Removal Illustration ---- 18
8. Precautions ------------------------------------ 19
9. Device Status Description ----------------- 20
10. Passcode Unlock --------------------------- 21
11. NFC Card Unlock --------------------------- 23
12. Fingerprint Unlock ------------------------- 24
13. Battery Replacement --------------------- 25
14. Unpairing ------------------------------------- 27
15. Lost Device ----------------------------------- 27
16. Firmware Upgrades ----------------------- 28
17. Troubleshooting ---------------------------- 28
18. Specifications -------------------------------- 29
19. Disclaimer ------------------------------------ 30
20. Warranty -------------------------------------- 30
21. Contact & Support ------------------------- 31
Contents
Package Contents
Double-sided
Adhesive Tape × 1
Wet Wipe
× 1
Screw Kit (Two 3.5 × 25 mm [#6 × 1"]
Screws, Two Expansion Bolts) × 1
Ejection Pin
× 1
Rubber Ring
× 2
SwitchBot Card
× 1
CR123A Battery
× 2
User Manual
× 1
SwitchBot
Keypad Touch × 1
Mounting Plate
× 1
Alignment Sticker
× 1
Triangle Opener
× 1
01 02
List of Components
Please note: if you want to set unlock passcode
remotely or receive notifications on your phone, you
will need a SwitchBot Hub Mini (sold separately).
Preparation
03 04
iOS 11.0+ Android OS 5.0+
Battery Cover
Mounting Plate
Removal Hole
Buzzer
Status Bar (Unlock Icon, Indicator Light,
Lock Icon, Low Battery Icon)
Light Sensor
Lock Button
OK Button (for passcode unlock only)
NFC Sensor (NFC sensing is valid within
the dotted box)
Fingerprint Verification Zone
You will need:
• A smartphone or tablet using Bluetooth 4.2
or later.
• The latest version of our app, downloadable
via the Apple App Store or Google Play Store.
• A SwitchBot account, you can register via
our app or sign in to your account directly
if you already have one.
Getting Started Safety Information
Keep your device away from heat and
humidity, and make sure it does not come
into contact with fire or water.
Do not touch or operate this product with
wet hands.
This product is a precision-based electronic
product, please avoid physical damage.
Do not attempt to disassemble, repair, or
modify the product.
Do not use the product where wireless
devices are not allowed.
•
•
•
•
•
Remove the battery cover and install the
batteries. Make sure the batteries are
installed in the right direction. Then put the
cover back on.
Open our app, register an account and
sign in.
Tap "+" at the top right of the Home page,
find the Keypad Touch icon and select,
then follow the instructions to add your
Keypad Touch.
05 06
1.
2.
3.
Before installation you will need:
Installation
Method 1: Install with Screws
Step 1: Confirm Installation Position
Tips: To avoid repeatedly changing positions after
installation and causing damage to your wall, we
suggest that you add Keypad Touch on our app first
to see whether you can control the Lock via Keypad
Touch at the chosen position. Make sure your Keypad
Touch is installed within 5 meters (16.4 ft) from
your Lock.
07 08
Add Keypad Touch following the instructions
on the app. After adding successfully, find a
suitable position on the wall, attach SwitchBot
Keypad Touch to the chosen position with
your hands, then check if you can lock and
unlock SwitchBot Lock smoothly when using
Keypad Touch.
If everything works correctly, place the
alignment sticker to the position chosen and
mark holes for screws using a pencil.
Electric Drill Rubber Hammer
Pencil Screwdriver
Prepare a suitably sized electric drill bit
before drilling.
① When installing on more rugged surfaces
like concrete or brick:
Use an electric drill with the 6 mm (15/64")
sized drill bit to drill holes at the marked
positions, then use the rubber hammer to
hammer the expansion bolts into the wall.
Step 2: Determine Drill Bit Size and
Drill Holes
Tips: For outdoor usage, we recommend that
you install with screws to prevent SwitchBot Keypad
Touch being moved without your permission.
Concrete or other hard surfaces can be challenging
for drilling. If you are not experienced with drilling
into a particular type of wall, you may want to
consider consulting a professional.
09 10
②When installing on surfaces like wood
or plaster:
Use an electric drill with the 2.8 mm (7/64")
sized drill bit to drill holes at the marked
positions.
11 12
Affix mounting plate to the wall using
screws. Make sure the mounting plate is
firmly attached, there should be no excess
movement when you press either side.
Tips: If the wall surface is uneven, you may need
to place two rubber rings at the two screw holes
at the back of the mounting plate.
Step 3: Attach Mounting Plate to the Wall
Align the two metal round buttons at the
back of your Keypad Touch with the two
round locating holes at the bottom of
mounting plate. Then press and slide your
Keypad Touch downwards with pressure
along the mounting plate. You will hear a
click when it is firmly attached. Then press
your Keypad Touch from different angles
using your hands to make sure it is stable.
Step 4: Attach Keypad Touch to
Mounting Plate
13 14
Tips:
①To avoid repeatedly changing positions after
installation and causing damage to your wall, we
suggest that you add Keypad Touch on our app first
to see whether you can control the Lock via Keypad
Touch at the chosen position. Make sure your
Keypad Touch is installed within 5 meters (16.4 ft)
from your Lock.
②3M adhesive tape can only attach firmly to smooth
surfaces like glass, ceramic tile and smooth door
surface. Please clean the installation surface first
before installation. (We recommend you install with
screws to prevent your Keypad Touch being
removed.)
Step 1: Confirm Installation Position
Method 2: Install with Adhesive Tape
①Check if the battery cover is properly
clicked into place. The battery cover should
cover the battery box perfectly and form a
flat surface with its surrounding case parts.
Then try attaching your Keypad Touch to the
mounting plate again.
②Check if the installation surface is uneven.
An uneven surface may cause the mounting
plate to be too closely mounted to the wall.
If so, you may need to place two rubber rings
at the screw holes at the back of the mounting
plate to ensure there is a certain distance
between the mounting plate and the wall
surface.
If you've run into problems when attaching
your Keypad Touch to the mounting plate,
please refer to the following solutions to solve
the problem:
Tabla de contenidos
