Swann QW48 Manual de usuario

Setup Wizard

Digital Video Recorder

Quick Start Guide

Welcome to the Setup Wizard! The Setup Wizard

automatically runs the first time you start your DVR and will

guide you through all the important settings you need to get

your DVR up and working. Please be patient as it can take a

moment for the wizard to appear after turning on your DVR.

QW48_4500081014E | © Swann 2014

Choose the language you want the menu system to be displayed in, and then click Apply to

continue.

Choose your Language

Uncheck the Start wizard when device starts? option. Once you have completed the Setup Wizard,

you do not require it to run again the next time you start your DVR. If you want to re-launch the

Setup Wizard in the future you can always do so by selecting the Enable Wizard checkbox in the

the Configuration menu screen, and then rebooting the DVR.

Click Next to continue.

Turn off Setup Wizard

We recommend changing the DVR’s default password of 12345 to a new password.

To do so, select the New Admin Password box, enter 12345 into the Admin Password field, and

then enter your new password into the New Password and Confirm fields.

Click Next to continue.

Set New Password

Set Date & Time

It’s important that your DVR has the correct time and date, as well as the correct time zone to ensure recorded

events are properly time stamped and schedules are triggered at the right time. Click Next to continue.

Time Zone: Select the time zone that you’re in.

Date Format: Select the preferred date format.

System Date: Set the current date.

System Time: Set the current time.

Live View Mode: Select the number of channel

screens to display from a variety of formats when

the DVR is in Live View mode.

Resolution: Select the maximum resolution for the

display that you have connected to the DVR

Configure Daylight Saving Time (DST)

You can configure your DVR to automatically adjust its time for Daylight Savings in your time

zone. You can set when daylight saving time starts and ends, for example - 2 a.m. on the first

Sunday of a particular month. Enable the Enable DST checkbox and adjust accordingly. If

Daylight Savings is not observed in your region, leave the Enable DST checkbox unchecked.

The Enable NTP option is checked by default. It’s the best way for your DVR to automatically

update and maintain accurate time by syncing its clock with an Internet Time Service.

Click Next to continue.

Configure Email Details

Ensure the email address where you want to receive email alerts is entered in the Receiver’s

Address box. Click Test to verify that the details entered are correct. After you’ve finished testing

your email, click Send UID to receive an email containing your DVR’s UID. The UID can be used to

access your DVR with SwannView Plus on your PC or mobile device.

Click OK to save the settings and complete the Wizard. Shortly, all of your connected cameras will

appear on your DVR Live View screen.

Sender’s email, eg. “yourDVR@gmail.com”

Sender’s email password

Enter “smtp.gmail.com”

Change to “465” for Gmail

Sender’s name. For example, “John’s DVR”

The Email address, eg. “yourDVR@gmail.com”

Recipient’s name. For example, your name

Recipient’s email, eg. my@emailaddress.com

You can configure your email account

details so that the DVR can send you

email alerts when events occur. We

recommend using Gmail because it

works well with your DVR and it’s free!

If you don’t have a Gmail address, go

to www.gmail.com to create one and

then enter the various details here.

Live View Screen

Live View is the default display mode for the DVR. Each camera that’s connected to the DVR will

be displayed here. You can check the status and operate your DVR and cameras with the icons

and menus on the Live View screen.

Status Icons

Shows the status of

your DVR.

Quick Camera Toolbar

Quickly access regularly

used DVR features by left-

clicking with the mouse

on one of the live video

channels available.

*Buttons shown here may

vary by model. For more

information, consult the user

manual supplied with your

DVR.

Menu Bar

Right-click with the

mouse on any area

of the Live View

screen to open.

Live View Icons & Controls

Menu Bar

1. Open the Main Menu.

2. Open a single channel for viewing in full screen mode.

3. Select a multi-screen viewing option, which allows you to

see multiple video feeds at once.

4. Display the previous set of channel(s).

5. Display the next set of channel(s).

6. Turn on sequence mode to automatically switch between

channels at specific intervals (also known as Dwell Time)

when you are on single channel and certain multi-channel

screen modes.

7. Begin Normal or Motion Detection recording on all

channels immediately, regardless of the current recording

schedule.

8. Change the video contrast level to one of the pre-defined

options available - Standard, Bright, Gentle or Vivid.

9. Playbackallrecordingsofthecurrentdayfromtheselected

channel.

10. Display the “PTZ Control Panel” (function not supported

on this model).

11. Stop the beeping of the current audible warning.

Status Icons

Indicates that an alarm event

such as motion detection, video

loss or tampering has occurred.

Indicates that the camera is

currently recording. This icon

will be the same whether the

recording was scheduled,

initiated manually or triggered

by motion (the Alarm Bell icon

will also be present if there’s

motion detected).

Indicates that the

channel displaying this

has lost video feed from

its camera.

Tabla de contenidos

Otros manuales de DVR de Swann

Swann

Swann Alpha D01 Manual de usuario

Swann

Swann DVR4-2500 Manual de usuario

Swann

Swann SW224-6T4 Manual de usuario

Swann

Swann DVR4-1100 Manual de usuario

Swann

Swann RedAlert Single Channel Digital Security... Manual de usuario

Swann

Swann DVR16-NET-PLUS Manual de usuario

Swann

Swann DVR16-8900 Manual de usuario

Swann

Swann P-6T4 Manual de usuario

Swann

Swann 4-4350 Manual de usuario

Swann

Swann Advanced D1 series Manual de usuario

Swann

Swann DVR4-1000 Manual de usuario

Swann

Swann DVR16-8500AI Manual de usuario

Swann

Swann Advanced D1 series Manual de usuario

Swann

Swann DVR16-3000 TruBlue Manual de usuario

Swann

Swann 7085 series Manual de usuario

Swann

Swann SW-R-DVR4 Manual de usuario

Swann

Swann 8600 Series Manual de usuario

Swann

Swann SW244-DRC Manual de usuario

Swann

Swann DVR8-NET-8000 Manual de usuario

Swann

Swann ThumbCam DVR-415 Manual de usuario

Swann

Swann DVR4-1160 Manual de usuario

Swann

Swann RedAlert/BlueAlert SW242-WDB Manual de usuario

Swann

Swann SW-R-DVR4 Manual de usuario

Swann

Swann DVR16-8600 Combo Manual de usuario

Manuales populares de DVR de otras marcas

FLIR

FLIR M3100E Series Manual de usuario

VTRACKPRO

VTRACKPRO FPRO300 Manual de usuario

XtendLan

XtendLan DVR-1670C Manual de usuario

urmet domus

urmet domus 1093/004AHD Manual de usuario

Holux

Holux M1 Manual de usuario

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manual de usuario

Whistler

Whistler D16VRS Manual de usuario

Defender Security

Defender Security 82-20235 Manual de usuario

MISUMI

MISUMI MP-WF100M Manual de usuario

Speco

Speco D8HU Manual de usuario

UST

UST DDR-E04AA Instrucciones de uso

Consolidated

Consolidated Digital Video Recorder Manual de usuario

Mace

Mace DVR0404RW Guía de inicio rápido

RCA

RCA RTD315W Manual de usuario

FSM

FSM Colibri Grande PRO Manual de usuario

Hauppauge

Hauppauge HD PVR 2 Manual de usuario

Identivision

Identivision ICR-PH161i PIONEER Manual de usuario

DIGIFUSION

DIGIFUSION FVRT150 Manual de usuario