Suzuki DL1000 Manual de usuario

DL1000

GROUP INDEX

GENERAL INFORMATION 1

PERIODIC MAINTENANCE 2

ENGINE 3

FI SYSTEM 4

COOLING AND LUBRICATION

SYSTEM 5

CHASSIS 6

ELECTRICAL SYSTEM 7

SERVICING INFORMATION 8

EMISSION CONTROL

INFORMATION 9

WIRING DIAGRAM 10

FOREWORD

This manual contains an introductory description on

the SUZUKI DL1000 and procedures for its inspec-

tion/service and overhaul of its main components.

Other information considered as generally known is

not included.

Read the GENERAL INFORMATION section to

familiarize yourself with the motorcycle and its main-

tenance. Use this section as well as other sections

to use as a guide for proper inspection and service.

This manual will help you know the motorcycle bet-

ter so that you can assure your customers of fast

and reliable service.

* This manual has been prepared on the basis

of the latest specifications at the time of publi-

cation. If modifications have been made since

then, differences may exist between the con-

tent of this manual and the actual motorcycle.

* Illustrations in this manual are used to show

the basic principles of operation and work

procedures. They may not represent the

actual motorcycle exactly in detail.

* This manual is written for persons who have

enough knowledge, skills and tools, including

special tools, for servicing SUZUKI motorcy-

cles. If you do not have the proper knowledge

and tools, ask your authorized SUZUKI

motorcycle dealer to help you.

Inexperienced mechanics or mechanics

without the proper tools and equipment

may not be able to properly perform the

services described in this manual.

Improper repair may result in injury to the

mechanic and may render the motorcycle

unsafe for the rider and passenger.

HOW TO USE THIS MANUAL

TO LOCATE WHAT YOU ARE LOOKING FOR:

1. The text of this manual is divided into sections.

2. The section titles are listed in the GROUP INDEX.

3. Holding the manual as shown at the right will allow you to find

the first page of the section easily.

4. The contents are listed on the first page of each section to

help you find the item and page you need.

COMPONENT PARTS AND WORK TO BE DONE

Under the name of each system or unit, is its exploded view. Work instructions and other service information

such as the tightening torque, lubricating points and locking agent points, are provided.

Example: Front wheel

ITEM N·m kgf-m lb-ft

100 10.0 72.5

23 2.3 16.5

Brake disc

Dust seal

Bearing

Center spacer

Coller

Front wheel

Tire valve

Front axle

Brake disc bolt

SYMBOL

Listed in the table below are the symbols indicating instructions and other information necessary for servic-

ing. The meaning of each symbol is also included in the table.

SYMBOL DEFINITION SYMBOL DEFINITION

Torque control required.

Data beside it indicates specified

torque.

Apply THREAD LOCK SUPER “1360”.

99000-32130

Apply oil. Use engine oil unless other-

wise specified. Use engine coolant.

99000-99032-11X

Apply molybdenum oil solution.

(Mixture of engine oil and SUZUKl

MOLY PASTE in a ratio of 1 : 1)

Use fork oil.

99000-99001-SS8

Apply SUZUKI SUPER GREASE “A”.

99000-25010 Apply or use brake fluid.

Apply SUZUKI MOLY PASTE.

99000-25140 Measure in voltage range.

Apply SUZUKI BOND “1207B”

99000-31140 Measure in current range.

Apply SUZUKI BOND “1215”.

99000-31110 Measure in diode test range.

Apply THREAD LOCK SUPER “1303”.

99000-32030 Measure in continuity test range.

Apply THREAD LOCK SUPER “1322”.

99000-32110 Use special tool.

Apply THREAD LOCK “1342”.

99000-32050 Indication of service data.

ABBREVIATIONS USED IN THIS

MANUAL

AABDC : After Bottom Dead Center

AC : Alternating Current

ACL : Air Cleaner, Air Cleaner Box

API : American Petroleum Institute

ATDC : After Top Dead Center

ATM Pressure: Atmospheric Pressure

Atmospheric Pressure Sensor

(APS)

A/F : Air Fuel Mixture

BBBDC : Before Bottom Dead Center

BTDC : Before Top Dead Center

B+ : Battery Positive Voltage

CCKP Sensor : Crankshaft Position Sensor

(CKPS)

CKT : Circuit

CLP Switch : Clutch Lever Position Switch

(Clutch Switch)

CMP Sensor : Camshaft Position Sensor

(CMPS)

CO : Carbon Monoxide

CPU : Central Processing Unit

DDC : Direct Current

DMC : Dealer Mode Coupler

DOHC : Double Over Head Camshaft

DRL : Daytime Running Light

EECM : Engine Control Module

Engine Control Unit (ECU)

(FI Control Unit)

ECT Sensor : Engine Coolant Temperature

Sensor (ECTS), Water Temp.

Sensor (WTS)

EVAP : Evaporative Emission

EVAP

Canister

: Evaporative Emission

Canister (Canister)

FFI : Fuel Injection, Fuel Injector

FP : Fuel Pump

FPR : Fuel Pressure Regulator

FP Relay : Fuel Pump Relay

GGEN : Generator

GND : Ground

GP Switch : Gear Position Switch

HHC : Hydrocarbons

IIAP Sensor : Intake Air Pressure Sensor (IAPS)

IAT Sensor : Intake Air Temperature Sensor

(IATS)

IG : Ignition

LLCD : Liquid Crystal Display

LED : Light Emitting Diode

(Malfunction Indicator Lamp)

LH : Left Hand

MAL-Code : Malfunction Code

(Diagnostic Code)

Max : Maximum

MIL : Malfunction Indicator Lamp

(LED)

Min : Minimum

NNOx : Nitrogen Oxides

OOHC : Over Head Camshaft

OPS : Oil Pressure Switch

PPCV : Positive Crankcase

Ventilation (Crankcase Breather)

RRH : Right Hand

ROM : Read Only Memory

SSAE : Society of Automotive Engineers

STC System : Secondary Throttle Control

System (STCS)

STP Sensor : Secondary Throttle Position

Sensor (STPS)

ST Valve : Secondary Throttle Valve (STV)

STV Actuator : Secondary Throttle Valve Actuator

(STVA)

TTO Sensor : Tip Over Sensor (TOS)

TP Sensor : Throttle Position Sensor (TPS)

VVD : Vacuum Damper

GENERAL INFORMATION 1-1

CONTENTS

GENERAL INFORMATION

WARNING/CAUTION/NOTE ...............................................................1- 2

GENERAL PRECAUTIONS ................................................................1- 2

SUZUKI DL1000K2 (’02-MODEL) ......................................................1- 4

SERIAL NUMBER LOCATION ...........................................................1- 4

FUEL, OIL AND ENGINE COOLANT RECOMMENDATION .............1- 4

FUEL ............................................................................................1- 4

ENGINE OIL .................................................................................1- 5

BRAKE FLUID .............................................................................1- 5

FRONT FORK OIL .......................................................................1- 5

ENGINE COOLANT .....................................................................1- 5

WATER FOR MIXING ..................................................................1- 5

ANTI-FREEZE/ENGINE COOLANT ............................................1- 5

LIQUID AMOUNT OF WATER/ENGINE COOLANT ...................1- 5

BREAK-lN PROCEDURES .................................................................1- 6

CYLINDER IDENTIFICATION ............................................................1- 6

INFORMATION LABELS ....................................................................1- 7

SPECIFICATIONS ..............................................................................1- 8

COUNTRY AND AREA CODES .........................................................1-10

1-2 GENERAL INFORMATION

WARNING/CAUTION/NOTE

Please read this manual and follow its instructions carefully. To emphasize special information, the symbol

and the words WARNING, CAUTION and NOTE have special meanings. Pay special attention to the mes-

sages highlighted by these signal words.

Indicates a potential hazard that could result in death or injury.

Indicates a potential hazard that could result in motorcycle damage.

NOTE:

Indicates special information to make maintenance easier or instructions clearer.

Please note, however, that the warnings and cautions contained in this manual cannot possibly cover all

potential hazards relating to the servicing, or lack of servicing, of the motorcycle. In addition to the WARN-

INGS and CAUTIONS stated, you must use good judgement and basic mechanical safety principles. If you

are unsure about how to perform a particular service operation, ask a more experienced mechanic for

advice.

GENERAL PRECAUTIONS

* Proper service and repair procedures are important for the safety of the service mechanic and

the safety and reliability of the motorcycle.

* When 2 or more persons work together, pay attention to the safety of each other.

* When it is necessary to run the engine indoors, make sure that exhaust gas is forced out-

doors.

* When working with toxic or flammable materials, make sure that the area you work in is well-

ventilated and that you follow all of the material manufacturer’s instructions.

* Never use gasoline as a cleaning solvent.

* To avoid getting burned, do not touch the engine, engine oil, radiator and exhaust system

until they have cooled.

* After servicing the fuel, oil, water, exhaust or brake systems, check all lines and fittings

related to the system for leaks.

GENERAL INFORMATION 1-3

* If parts replacement is necessary, replace the parts with Suzuki Genuine Parts or their equiva-

lent.

* When removing parts that are to be reused, keep them arranged in an orderly manner so that

they may be reinstalled in the proper order and orientation.

* Be sure to use special tools when instructed.

* Make sure that all parts used in reassembly are clean. Lubricate them when specified.

* Use the specified lubricant, bond, or sealant.

* When removing the battery, disconnect the negative cable first and then the positive cable.

* When reconnecting the battery, connect the positive cable first and then the negative cable,

and replace the terminal cover on the positive terminal.

* When performing service to electrical parts, if the service procedures not require use of bat-

tery power, disconnect the negative cable the battery.

* When tightening the cylinder head and case bolts and nuts, tighten the larger sizes first.

Always tighten the bolts and nuts diagonally from the inside toward outside and to the speci-

fied tightening torque.

* Whenever you remove oil seals, gaskets, packing, O-rings, locking washers, self-locking

nuts, cotter pins, circlips and certain other parts as specified, be sure to replace them with

new ones. Also, before installing these new parts, be sure to remove any left over material

from the mating surfaces.

* Never reuse a circlip. When installing a new circlip, take care not to expand the end gap larger

than required to slip the circlip over the shaft. After installing a circlip, always ensure that it is

completely seated in its groove and securely fitted.

* Use a torque wrench to tighten fasteners to the specified torque. Wipe off grease and oil if a

thread is smeared with them.

* After reassembling, check parts for tightness and proper operation.

* To protect the environment, do not unlawfully dispose of used motor oil, engine coolant and

other fluids: batteries, and tires.

* To protect Earth’s natural resources, properly dispose of used motorcycle and parts.

1-4 GENERAL INFORMATION

SUZUKI DL1000K2 (’02-MODEL)

* Difference between photographs and actual motorcycles depends on the markets.

SERIAL NUMBER LOCATION

The frame serial number or V.I.N. (Vehicle Identification Number)

1is stamped on the right side of the

steering head pipe. The engine serial number

2is located on the right side of the crankcase. These num-

bers are required especially for registering the machine and ordering spare parts.

FUEL, OIL AND ENGINE COOLANT RECOMMENDATION

FUEL (FOR CANADIAN MODEL)

Use only unleaded gasoline of at least 87 pump octane ( ) or 91 octane or higher rated by the research

method.

Gasoline containing MTBE (Methyl Tertiary Butyl Ether), less than 10% ethanol, or less than 5% methanol

with appropriate cosolvents and corrosion inhibitor is permissible.

FUEL (FOR OTHER COUNTRIES)

Gasoline used should be graded 91 octane (Research Method) or higher. Unleaded gasoline is recom-

mended.

RIGHT SIDE LEFT SIDE

R + M

Otros manuales para DL1000

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Motocicleta de Suzuki

Suzuki

Suzuki 1996 GSX-R750 Manual de usuario

Suzuki

Suzuki drz 400E Manual de usuario

Suzuki

Suzuki VL1500 Manual de usuario

Suzuki

Suzuki GSX-F 750 - Manual de usuario

Suzuki

Suzuki GSX-R1000 Manual de usuario

Suzuki

Suzuki Inazuma Manual de usuario

Suzuki

Suzuki VX800L Manual de usuario

Suzuki

Suzuki FA50 Manual de usuario

Suzuki

Suzuki GSX-R750 Manual de usuario

Suzuki

Suzuki LT-Z90 Manual de usuario

Suzuki

Suzuki GSF1250 Manual de usuario

Suzuki

Suzuki FU150MF Manual de usuario

Suzuki

Suzuki AN650Z Manual de usuario

Suzuki

Suzuki gsr750 Manual

Suzuki

Suzuki GSR600 Manual de usuario

Suzuki

Suzuki RF 900 R Manual de usuario

Suzuki

Suzuki GSX-1300R Manual de usuario

Suzuki

Suzuki SV1000 Manual de usuario

Suzuki

Suzuki RM250 Guía de aplicación

Suzuki

Suzuki GSX-R750W 1993 Manual de usuario

Suzuki

Suzuki T500 Manual de usuario

Suzuki

Suzuki Intruder VL1500B Manual de usuario

Suzuki

Suzuki GSF600Y 2000 Manual de usuario

Suzuki

Suzuki GSX R600 2003 Manual de usuario

Manuales populares de Motocicleta de otras marcas

OHVALE

OHVALE GP-0 Manual de lista de piezas

Yamaha

Yamaha Star XV19CTSZ 2009 Manual de usuario

KTM

KTM 350 XCF-W USA Manual de usuario

HYOSUNG

HYOSUNG ST7 Manual de usuario

Husqvarna

Husqvarna FC 250 2016 Manual de usuario

Ducati

Ducati SCRAMBLER 800 Manual de instrucciones

MOTO GUZZI

MOTO GUZZI QUOTA 1100 ES Manual de usuario

APRILIA

APRILIA ETV MILLE CAPONORD - PART1 02-2001 Manual de usuario

Yamaha

Yamaha 2006 YZF-R1V Manual de usuario

KTM

KTM Freeride E-XC 2021 Manual de usuario

Fantic

Fantic Enduro 125 Manual de usuario

Ducati

Ducati Supersport 750 desmodue Manual de usuario

MV Agusta

MV Agusta 2008 F4 312RR 1078 Manual de instrucciones

Yamaha

Yamaha XVS650A Manual de usuario

Yamaha

Yamaha YZF-R6T(C) Manual

Ducati

Ducati 748 monoposto strada Manual de usuario

ATK

ATK 1988 250 Manual de usuario

Excelsior-HENDERSON

Excelsior-HENDERSON 1999 HCX Manual de usuario