8 |Surfacide® Helios™ Ultraviolet Light Disinfection System | Surfacide.com
10. Place the accessory box in the crate below the joiner.The crate is ready to be closed up.
11. Remove the pegs from the ramp (photo far right above).
12.Lift the ramp up and slide into the front of the crate and replace ramp pegs in their original
holes.
QUESTIONS?
Call us toll-free at
844-390-3538
U.S. Patent No. 8,575,567 to
Lyslo et al., entitled Hard-Surface
Disinfection System. Other
Patents Pending.Exclusively
manufactured by PreventaMed®
Technologies. Surfacide®
and Helios™ are registered
trademarks of Surfacide, LLC.
Surfacide.com
12/2014
