Supermicro X6DAL-G Manual de usuario

X6DAL-G

X6DAL-TG

USER’S MANUAL

Revision 1.0c

SUPER

The information in this User’s Manual has been carefully reviewed and is believed to be

accurate. The vendor assumes no responsibility for any inaccuracies that may be

contained in this document, makes no commitment to update or to keep current the

information in this manual, or to notify any person or organization of the updates.

Please Note: For the most up-to-date version of this manual, please

see our web site at www.supermicro.com.

SUPERMICRO COMPUTER reserves the right to make changes to the product described in

this manual at any time and without notice. This product, including software, if any, and

documentation may not, in whole or in part, be copied, photocopied, reproduced, translated

or reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR

INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPERMICRO COMPUTER SHALL

NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING,

INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR

DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of

Santa Clara County in the State of California, USA. The State of California, County of

Santa Clara shall be the exclusive venue for the resolution of any such disputes.

Supermicro's total liability for all claims will not exceed the price paid for the hardware

product.

*California Best Management Practices Regulations for Perchlorate Materials

This Perchlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin

cells. "Perchlorate Material-special handling may apply. See WWW.dtsc.ca.gov/hazardouswaste/

perchlorate".

Manual Revision: Rev. 1.0c

Release Date: May 21, 2007

Unless you request and receive written permission from SUPER MICRO COMPUTER, you

may not copy any part of this document.

Information in this document is subject to change without notice. Other products and

companies referred to herein are trademarks or registered trademarks of their respective

companies or mark holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use

of the X6DAL-G/X6DAL-TG motherboard. The X6DAL-

G/X6DAL-TG supports single or dual Intel®Xeon NoconaTM processors at a

800 MHz front side bus. Based upon Intel's NetBurst microarchitecture with

EM64T support, the Nocona processor supports IA-32 and IA-64 software

and includes features found in the XeonTM processor such as Hyper

Pipelined Technology, which includes a multi-stage pipeline, allowing the

processor to operate at much higher core frequencies. Packaged in a 604-

pin Flip Chip Micro Pin Grid Array(FC-mPGA4) platform in a Zero Insertion

Force(ZIF) socket (mPGA 604), the Nocona Processor (800 MHz) supports

Hyper-Threading Technology and is ideal for high performance workstation

and server environments with up to two processors on one system bus.

Please refer to the motherboard specifications pages on our web site (http:/

/www.supermicro.com/products/motherboard/) for updates on supported

processors. This product is intended to be professionally installed.

Manual Organization

Chapter 1 begins with a checklist of what should be included in your

mainboard box, describes the features, specifications and performance of

the motherboard and provides detailed information about the chipset.

Chapter 2 begins with instructions on handling static-sensitive devices.

Read this chapter when you want to install the processor and DIMM memory

modules and when mounting the mainboard in the chassis. Also refer to

this chapter to connect the floppy and hard disk drives, SCSI drives, the IDE

interfaces, the parallel and serial ports, the keyboard and mouse, the power

supply and various control panel buttons and indicators.

If you encounter any problems, see Chapter 3, which describes trouble-

shooting procedures for the video, the memory and the setup configuration

stored in CMOS. For quick reference, a general FAQ [Frequently Asked

Questions] section is provided.

Chapter 4 includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup utility.

Appendix A lists BIOS Error Beep Codes and DS LED POST Codes.

Appendix B provides BIOS POST codes.

Appendix C provides software installation instructions.

Appendix D provides installation instructions on Adaptec's SATA HostRAID

Driver based on Marvell's chip.

Preface

About This Manual ...................................................................................................... iii

Manual Organization ................................................................................................... iii

Chapter 1: Introduction

1-1 Overview......................................................................................................... 1-1

Checklist .................................................................................................... 1-1

Contacting Supermicro............................................................................ 1-2

X6DAL-G/X6DAL-TG Image................................................. 1-3

X6DAL-G/X6DAL-TG Layout ............................................... 1-4

X6DAL-G/X6DAL-TG Quick Reference ............................. 1-5

Motherboard Features ............................................................................. 1-6

Intel Lindenhurst Chipset: System Block Diagram ............................. 1-8

1-2 Chipset Overview........................................................................................... 1-9

1-3 Special Features............................................................................................. 1-9

BIOS Recovery......................................................................................... 1-9

Recovery from AC Power Loss ........................................................... 1-9

1-4 PC Health Monitoring.................................................................................... 1-10

1-5 ACPI Features ............................................................................................... 1-11

1-6 Power Supply ............................................................................................... 1-13

1-7 Super I/O......................................................................................................... 1-13

Chapter 2: Installation

2-1 Static-Sensitive Devices ............................................................................... 2-1

Precautions............................................................................................... 2-1

Unpacking.................................................................................................. 2-1

2-2 PGA Processor and Heatsink Installation .................................................. 2-2

2-3 Installing DIMMs............................................................................................... 2-5

2-4 I/O Ports/Control Panel Connectors............................................................. 2-6

2-5 Connecting Cables .......................................................................................... 2-8

ATX Power Connector............................................................................ 2-8

Processor Power Connector................................................................. 2-8

NMI Button .................................................................................................. 2-8

Power LED................................................................................................. 2-8

HDD LED .................................................................................................... 2-9

NIC1 LED ................................................................................................... 2-9

Overheat LED ........................................................................................... 2-9

Table of Contents

X6DAL-G/X6DAL-TG User's Manual

Table of Contents

Power Fail LED ......................................................................................... 2-9

Reset Button........................................................................................... 2-10

Power Button ......................................................................................... 2-10

Chassis Intrusion ................................................................................... 2-10

Universal Serial Bus (USB0/1) ............................................................ 2-10

Extra Universal Serial Bus Headers (USB2/3) ................................. 2-11

Serial Ports ............................................................................................. 2-11

GLAN (Ethernet Port)............................................................................. 2-11

ATX PS/2 Keyboard and Mouse Ports................................................ 2-11

Fan Headers........................................................................................... 2-12

Power LED/Speaker Header (JD1) ..................................................... 2-12

Wake-On-Ring ......................................................................................... 2-12

Keylock ..................................................................................................... 2-12

Wake-On-LAN ......................................................................................... 2-13

SATA Activity LED ................................................................................. 2-13

2-6 Jumper Settings ............................................................................................ 2-14

Explanation of Jumpers ........................................................................ 2-14

GLAN Enable/Disable............................................................................. 2-14

CMOS Clear............................................................................................. 2-14

USB Wake-Up.......................................................................................... 2-15

Watch Dog Enable/Disable .................................................................... 2-15

System Bus Speed................................................................................. 2-15

Serial ATA Enable/Disable .................................................................... 2-16

Thermal Fan Control ............................................................................... 2-16

Keyboard Wake-Up................................................................................. 2-16

2-7 Onboard Indicators ...................................................................................... 2-17

GLAN LEDs.............................................................................................. 2-17

2-8 Parallel Port, Floppy/Hard Disk Drive and SCSI Connections ............... 2-18

Parallel Port Connector ......................................................................... 2-18

Floppy Connector................................................................................... 2-18

IDE Connectors ...................................................................................... 2-19

Chapter 3: Troubleshooting

3-1 Troubleshooting Procedures ........................................................................ 3-1

Before Power On .................................................................................... 3-1

No Power .................................................................................................. 3-1

No Video ................................................................................................... 3-1

Memory Errors.......................................................................................... 3-2

Losing the System’s Setup Configuration ........................................... 3-2

3-2 Technical Support Procedures .................................................................... 3-2

3-3 Frequently Asked Questions........................................................................ 3-3

3-4 Returning Merchandise for Service............................................................ 3-5

Chapter 4: BIOS

4-1 Introduction....................................................................................................... 4-1

4-2 Main BIOS Setup.............................................................................................. 4-2

4-3 Advanced Setup.............................................................................................. 4-3

4-4 Boot Setup...................................................................................................... 4-19

4-5 Security Setup ............................................................................................... 4-22

4-6 Exit ................................................................................................................... 4-23

Appendices:

Appendix A: BIOS Error Beep Codes and DS7/DS8 LED POST Codes ......... A-1

Appendix B: BIOS POST Codes .............................................................................B-1

Appendix C: Installing Software Drivers and the Operating System ..............C-1

Appendix D: Installing the Adaptec SATA HostRAID Controller......................D-1

X6DAL-G/X6DAL-TG User's Manual

Chapter 1: Introduction

1-1

Introduction

Chapter 1

Introduction

1-1 Overview

Checklist

Congratulations on purchasing your computer motherboard from an ac-

knowledged leader in the industry. Supermicro boards are designed with

the utmost attention to detail to provide you with the highest standards in

quality and performance. Check that the following items have all been in-

cluded with your motherboard. If anything listed here is damaged or miss-

ing, contact your retailer. All are included in the retail box.

One (1) Supermicro Mainboard

One (1) ribbon cable for IDE devices (CBL-036)

One (1) floppy ribbon cable (CBL-022)

One (1) SATA cable (CBL-044) (*X6DAL-G)

Four (4) SATA cables (CBL-044) (*X6DAL-TG)

One (1) CPU mounting plate (SKT-159)

Two (2) CPU retention brackets (SKT-158: pre-installed)

One (1) I/O backpanel shield (CSE-PT2)

One (1) Supermicro CD containing drivers and utilities (CDR_INTC)

One (1) User's/BIOS Manual

1-2

Introduction

X6DAL-G/X6DAL-TG User's Manual

Contacting Supermicro

Headquarters

Address: SuperMicro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: SuperMicro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Asia-Pacific

Address: SuperMicro, Taiwan

4F, No. 232-1 Liancheng Road

Chung-Ho 235, Taipei County, Taiwan, R.O.C.

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3991

Web Site: www.supermicro.com.tw

Technical Support:

Email: [email protected]

Tel: 886-2-8228-1366, ext.132 or 139

Chapter 1: Introduction

1-3

Introduction

Figure 1-1. SUPER X6DAL-G/X6DAL-TG Image

(*The difference between the X6DAL-G and the X6DAL-TG

is that the X6DAL-TG has an additional 4-port SATA

Marvell Controller.)

1-4

Introduction

X6DAL-G/X6DAL-TG User's Manual

Figure 1-2. SUPER X6DAL-G/X6DAL-TG Motherboard Layout

(not drawn to scale)

Notes:

1. Jumpers not indicated are for test purposes only.

2. " " indicates Pin 1.

3. The differences between the X6DAL-G and the X6DAL-TG are:

* Marvell's SATA controller is available on the X6DAL-TG only.

* There are additional four SATA ports (using Marvell's SATA

controller) on the X6DAL-TG.

KB/

Mouse

DIMM 3A

DIMM 3B

DIMM 2A

DIMM 2B

DIMM 1A

DIMM 1B

Tumwater

(North Bridge)

Marvell

IDE #1

IDE #2

USB

0/1

COM2

COM1

8-pin

PW2

ATX PWR

JPF

Force

PW-On

Mic

J26

Audio

Enable

SI/O

PCI-E6 (x16)

PCI-X 3 (66 MHz)

PCI-X2 (66 MHz)

Battery

WOR

JPS1

FAN1

LAN1

Aux in

CDin

PCI-4 (33MHz)

J13 J15

JPL1

PCI-E1 (X8)

Floppy

PW LED/KL

SATA2

Chassis

Intrusion

Hance

Rapids

USB2/3

JF1

JBT1

JWD

Dn:Line_In

Up:Line_Out

J41

J35

JSLED

SATA

LED

SATA I

(*X6DAL-TG)

Watch

Dog

LAN1 Enable

Fan5 Fan6

JWOL

JF2

Spkr CL CMOS

Fan4

FP Ctlr

Fan3

Fan2

CPU2

CPU1

SMB data toPCIEn.

SMBCLKtoPCI En.

CN1

AlMRset

J27

Fault

SMBPW

PCI-5 (33MHz)

PW1

PW3

J43

LAN

CTRL

BIOS

Printer

Spkr

SATA0

SATA3

SATA1

JL1

SATA

CTRL

Marvell SATA

Enable

H-SATA0

H-SATA1

JS0

JS1

DS1

DS3

DS6

DS2

DS5

DS7

DS8

DS9

J42

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de Supermicro

Supermicro

Supermicro Supero H8SME-F Manual de usuario

Supermicro

Supermicro SUPER P6DGH Manual de usuario

Supermicro

Supermicro X11SBA-LN4F/F Manual de usuario

Supermicro

Supermicro H12DGO-6 Manual de usuario

Supermicro

Supermicro C7Z270-CG-L Manual de usuario

Supermicro

Supermicro SUPERO X10DRU-X Manual de usuario

Supermicro

Supermicro X11SCE-F Manual de usuario

Supermicro

Supermicro X12SPG-NF Manual de usuario

Supermicro

Supermicro X13SEI-TF Manual de usuario

Supermicro

Supermicro X7SLM Manual de usuario

Supermicro

Supermicro X11SAA Manual de usuario

Supermicro

Supermicro 370DLR Plus Manual de usuario

Supermicro

Supermicro X13SEW-TF Manual de usuario

Supermicro

Supermicro P4SCA Manual de usuario

Supermicro

Supermicro X5DPA-G Manual de usuario

Supermicro

Supermicro X10DRT-B+ Manual de usuario

Supermicro

Supermicro X11SDD-8C-F Manual de usuario

Supermicro

Supermicro X11SDV-16C-TP8F Manual de usuario

Supermicro

Supermicro Super X6DHR-TG Instrucciones de instalación y funcionamiento

Supermicro

Supermicro X13SCW-F Manual de usuario

Supermicro

Supermicro X11DPL-i Manual de usuario

Supermicro

Supermicro X10DRi-T Manual de usuario

Supermicro

Supermicro M12SWA-TF Manual de usuario

Supermicro

Supermicro SUPER P5MMA2 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario