Supermicro SBA-7141M-T Manual de usuario

SBA-7141M-T

Blade Module

User’s Manual

Revison 1.0b

SBA-7141M-T Blade Module User’s Manual

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The

vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no

commitment to update or to keep current the information in this manual, or to notify any person or

organization of the updates. Please Note: For the most up-to-date version of this manual, please see

our web site at www.supermicro.com.

Super Micro Computer, Inc. (“Supermicro”) reserves the right to make changes to the product described

in this manual at any time and without notice. This product, including software, if any, and documentation

may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any medium or

machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE

THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,

SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF

REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,

SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara

County in the State of California, USA. The State of California, County of Santa Clara shall be the

exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not

exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital

device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the manufacturer’s instruction manual, may cause harmful interference with radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference,

in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning

applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further

details.

Manual Revison 1.0b

Release Date: July 21, 2009

Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy

any part of this document.

Information in this document is subject to change without notice. Other products and companies referred

to herein are trademarks or registered trademarks of their respective companies or mark holders.

Printed in the United States of America

WARNING: HANDLING OF LEAD SOLDER MATERIALS USED IN THIS

PRODUCT MAY EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE

STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS AND OTHER

REPRODUCTIVE HARM.

iii

Preface

About this Manual

This manual is written for professional system integrators, Information Technology

professionals, service personnel and technicians. It provides information for the

installation and use of Supermicro's SBA-7141M-T Blade Module. Installation and

maintenance should be performed by experienced professionals only.

Manual Organization

Chapter 1: Introduction

The first chapter provides a checklist of the main components included with the

SBA-7141M-T Blade Module and describes its main features.

Chapter 2: System Safety

You should familiarize yourself with this chapter for a general overview of safety

precautions that should be followed when installing and servicing the SBA-7141M-T

Blade Module.

Chapter 3: Setup and Installation

Refer to this chapter for details on installing the SBA-7141M-T Blade Module into the

SuperBladeSuperBlade chassis. Other sections cover the installation and placement of

memory modules and the installation of hard disk drives into the blade module.

Chapter 4: Blade Module Features

This chapter coves features and component information about the SBA-7141M-T Blade

Module. Included here are descriptions and information for mainboard components,

connectors, LEDs and other features of the blade module.

Chapter 5: BIOS

BIOS setup is covered in this chapter for the SBA-7141M-T Blade Module.

Appendix A: BIOS POST Codes

BIOS POST Codes for the SBA-7141M-T Blade Module are explained in this appendix.

SBA-7141M-T Blade Module User’s Manual

Notes

Table of Contents

Chapter 1 Introduction.......................................................................1-1

1-1 Overview.............................................................................................1-1

1-2 Product Checklist of Typical Components.....................................1-1

1-3 Blade Module Features....................................................................1-2

Processors..............................................................................................1-2

Memory...................................................................................................1-2

Storage....................................................................................................1-3

Density....................................................................................................1-3

1-4 Contacting Supermicro.....................................................................1-4

Chapter 2 System Safety..................................................................2-1

2-1 Electrical Safety Precautions...........................................................2-1

2-2 General Safety Precautions.............................................................2-2

2-3 Electrostatic Discharge Precautions ..............................................2-2

2-4 Operating Precautions......................................................................2-2

Chapter 3 Setup and Installation.................................................3-1

3-1 Overview.............................................................................................3-1

3-2 Installing Blade Modules..................................................................3-1

Powering Up a Blade Unit.......................................................................3-1

Powering Down a Blade Unit ..................................................................3-1

Removing a Blade Unit from the Enclosure............................................3-1

Removing/Replacing the Blade Cover....................................................3-2

Installing a Blade Unit into the Enclosure ...............................................3-2

3-3 Processor Installation.......................................................................3-4

3-4 Onboard Battery Installation............................................................3-5

3-5 Memory...............................................................................................3-6

Populating Memory Slots........................................................................3-6

DIMM Installation ....................................................................................3-8

3-6 Hard Disk Drive Installation.............................................................3-9

3-7 Installing the Operating System......................................................3-9

Installing with an External USB CD-ROM Drive......................................3-9

Installing via PXE Boot..........................................................................3-10

Installing via Virtual Media (Drive Redirection) .....................................3-10

3-8 Management Software...................................................................3-10

SBA-7141M-T Blade Module User’s Manual

3-9 Configuring and Setting up RAID.................................................3-11

Chapter 4 Blade Module Features..............................................4-1

4-1 Control Panel.....................................................................................4-2

Power Button ..........................................................................................4-3

KVM Button.............................................................................................4-3

LED Indicators ........................................................................................4-3

KVM Connector.......................................................................................4-3

4-2 Mainboard...........................................................................................4-4

Jumpers..................................................................................................4-5

CMOS Clear............................................................................................4-6

4-3 Blade Unit Components...................................................................4-6

Memory Support .....................................................................................4-7

Hard Disk Drives.....................................................................................4-7

Chapter 5 BIOS.......................................................................................5-1

5-1 Introduction.........................................................................................5-1

System BIOS ..........................................................................................5-1

How To Change the Configuration Data .................................................5-1

Starting the Setup Utility..........................................................................5-1

5-2 BIOS Updates....................................................................................5-2

Flashing BIOS.........................................................................................5-2

5-3 Running Setup...................................................................................5-3

5-4 Main BIOS Setup Menu ...................................................................5-4

System Time/System Date .....................................................................5-4

5-5 Advanced Settings Menu.................................................................5-5

BOOT Settings Configuration .................................................................5-5

CPU Configuration..................................................................................5-7

SATA Configuration.................................................................................5-7

PCI/PnP Configuration............................................................................5-8

Super IO Configuration...........................................................................5-9

Chipset Configuration .............................................................................5-9

NorthBridge Configuration..................................................................5-10

SouthBridge/MCP55 Configuration....................................................5-11

Event Log Configuration .......................................................................5-12

PCI Express Configuration....................................................................5-12

Remote Access Configuration ..............................................................5-13

System Health Monitor..........................................................................5-13

5-6 Boot Menu........................................................................................5-14

vii

5-7 Security Menu..................................................................................5-14

5-8 Exit Menu..........................................................................................5-15

Appendix A BIOS POST Codes....................................................A-1

A-1 BIOS POST Messages....................................................................A-1

A-2 BIOS POST Codes...........................................................................A-3

Recoverable POST Errors......................................................................A-4

Terminal POST Errors.............................................................................A-4

SBA-7141M-T Blade Module User’s Manual

viii

Notes

List of Figures

Figure 1-1. Full Rack of Blade Enclosures and Blade Servers.........................1-3

Figure 3-1. Inserting a Blade into the Enclosure...............................................3-3

Figure 3-2. Locking the Blade into Position.......................................................3-3

Figure 3-3. Installing a Processor in a Socket...................................................3-5

Figure 3-4. Installing the Onboard Battery........................................................3-6

Figure 3-5. 16-slot DIMM Numbering................................................................3-8

Figure 3-6. Installing a DIMM into a Memory Slot.............................................3-9

Figure 4-1. SBA-7141M-T Blade Unit Front View.............................................4-1

Figure 4-2. Blade Control Panel........................................................................4-2

Figure 4-3. BHQME Mainboard.........................................................................4-4

Figure 4-4. NVidia MCP55 Pro Chipset: Block Diagram for SBA-7141M-T......4-5

Figure 4-5. Exploded View of SBA-7141M-T Blade Module.............................4-6

SBA-7141M-T Blade Module User’s Manual

Notes

Tabla de contenidos

Otros manuales de Unidad de control de Supermicro

Supermicro

Supermicro SBM-25G-P10 Manual de usuario

Supermicro

Supermicro MicroBlade MBI-6218G-T81X Manual de usuario

Supermicro

Supermicro SBI-6419P-T3N Manual de usuario

Supermicro

Supermicro MBI-6418A-T5H Manual de usuario

Supermicro

Supermicro AOC-ATG-i2S Manual de usuario

Supermicro

Supermicro MicroBlade MBI-6219G-T8HX Manual de usuario

Supermicro

Supermicro SuperBlade SBI-8149P-C4N Manual de usuario

Supermicro

Supermicro SUPERO C9Z590-CG Manual de usuario

Supermicro

Supermicro MicroBlade MBI-6219G-T7LX Manual de usuario

Supermicro

Supermicro MicroBlade MBI-6119G-C2 Manual de usuario

Supermicro

Supermicro MicroBlade MBI-6118G-T81X Manual de usuario

Supermicro

Supermicro SBI-6129P-T3N Manual de usuario

Supermicro

Supermicro MicroBlade MBI-6118G-T41X Manual de usuario

Supermicro

Supermicro SuperBlade SBI-7228R-T2F2 Manual de usuario

Supermicro

Supermicro AOM-TPM-9670V Manual de usuario

Supermicro

Supermicro SuperBlade SBI-7128R-C6N Manual de usuario

Supermicro

Supermicro MicroBlade MBI-6119M-C2 Manual de usuario

Supermicro

Supermicro MBI-6219G-T Manual de usuario

Supermicro

Supermicro MCP-220-00119-0B Manual de usuario

Supermicro

Supermicro MicroBlade MBI-6218G-T41X Manual de usuario

Supermicro

Supermicro MicroBlade MBI-6118D-T2 Manual de usuario

Supermicro

Supermicro SuperBlade SBI-6419P-C3N Manual de usuario

Supermicro

Supermicro SuperBlade SBI-4129P-T3N Manual de usuario

Supermicro

Supermicro AOC-A100G-b2CM Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario