Superlum BroadLighter-M Series Manual de usuario

USER MANUAL

BroadLighter-M Series

Broadband Superluminescent Diode

Benchtop Light Source

Superlum, Unit B3, Fota Point Enterprise Park, Carrigtwohill, Co. Cork, Ireland.

Phone: +353 21 4533666, fax: +353 21 4533026, e-mail: sales@superlum.ie

www.superlumdiodes.com

Superlum reserves the right to change or make corrections to this manual further without notice.

Revision 16

June 2015

Declaration of Conformity

According to ISO/IEC Guide 22 and CEN/CENELEC EN 45014

Manufacturer’s Name: Superlum Diodes Ltd.

Manufacturer’s Address: Unit B3, Fota Point Enterprise Park

Carrigtwohill, Co Cork

Ireland

Declares that,

Product Name: Broadband Superluminescent Diode Benchtop Light

Source

Product Number: BroadLighter-M

Product Options: This declaration covers all options of the above

product(s).

This product complies with the following standards/ requirements:

EMC

Standard

Limit

IEC 61326-1:1997+A1:1998 / EN

61326-1:1997+A1:1998

Group 1 Class A

CISPR 11:1990 / EN 55011:1991

4kV CD, 8kV AD

IEC 61000-4-2:1995+A1:1998 /

EN 61000-4-2:1995

3 V/m, 80-1000

MHz

IEC 61000-4-3:1995 / EN 61000-

4-3:1995

0.5kV signal lines,

1kV power lines

IEC 61000-4-4:1995 / EN 61000-

4-4:1995

0.5 kV line-line, 1

kV line-ground

3V, 0.15-80 MHz

IEC 61000-4-5:1995 / EN 61000-

4-5:1995

0.5 kV line-line, 1

kV line-ground

IEC 61000-4-6:1996 / EN 61000-

4-6:1996

Dips: 30% 10ms;

60% 100ms

IEC 61000-4-11:1994 / EN

61000-4-11:1994

Interrupt >

95%@5000ms

The product was tested in a

typical configuration

Safety

IEC 61010-1:1990+A1:1992+A2:1995 /

N 61010-1:1993+A2:1995

Laser

Safety

IEC60825-1:2014

BroadLighter-M Series

User Manual

Revision 16

Certificate Exclusions

This Declaration, and all documentation, and all

equipment cited herein, shall cease to conform to and/or

be compliant with the above Directives, Standards and

Specifications unless the following conditions are

complied with and applied by the Purchaser /User:

This Product shall be installed, used and

maintained as directed by Superlum.

The Product shall not be modified and/or changed

without prior written approval of Superlum.

Although every effort is made by Superlum to comply with

the above Directives and Standards, itis the responsibility

of the Purchaser and/or User of the equipment to ensure

that all claims and assurances with regards to such

directives and Standards are complete, correct and

satisfied.

IEC 825-1

Warranty

Superlum warrants the BroadLighter-M Broadband SLD

Benchtop Light Source for a period of 12 months from the

date of shipment. During this warranty period Superlum

will repair / exchange any unit proven to be defective.

Repairs are warranted for the balance of the original

warranty period or at least 90 days.

For warranty repairs or service the unit must be

returned to Superlum at the customer’s expense.

Limitation of Warranty

Superlum will not accept liability for any incidental

damage caused by the failure of this product. This

warranty does NOT cover:

Any defect/damage caused by improper

operation.

Accompanying accessories, e.g. fiber optical

patchcables, AC power cords, etc.

Dismantling anypart of the unit without prior approval

from Superlum will void the warranty.

BroadLighter-M Series

User Manual

Revision 16

Statement of Calibration

Superlum certifies that this product has been inspected,

tested, and calibrated to meet its published specifications.

TABLE OF CONTENTS

Warranty...................................................................... 2

TABLE OF CONTENTS ............................................... 4

Safety Symbols and Terms ........................................ 7

General Safety Information ........................................ 9

Acronyms and Abbreviations .................................. 20

1. General Information.............................................. 22

1.In This Manual …………………………………………………………….22

1.2 Instrument Description.................................................25

1.3 Product Specifications .................................................32

2. Installation............................................................. 35

2.1 Unpacking and Initial Inspection.................................35

2.1.1 Unpacking the Instrument................................35

2.1.2 Initial Inspection.................................................36

2.2 Preparation for Use......................................................38

3. Local Mode of Operation...................................... 40

3.1 Front-Panel Features...................................................40

BroadLighter-M Series

User Manual

Revision 16

3.2 Rear-Panel Features....................................................42

3.3 Operating Instructions..................................................44

3.4 Power OFF Instructions...............................................47

3.5 Interface Menu ..............................................................48

3.5.1 Main Interface Screen.......................................48

3.5.2 Main Screen Status Messages .......................52

3.5.3 Main Screen Status Indicators........................53

3.5.4 Main Menu..........................................................54

4. Remote Mode of Operation .................................. 57

4.1 Remote Control Interface............................................58

4.2 USB interface…............................................................60

4.2.1 System Commands...........................................62

4.2.2 USB Mode Commands.....................................64

4.3 Superlum Companion Software .................................77

4.3.1 Minimum System Requirements....................78

4.3.2 Installing the USB drivers................................79

4.3.3 Installing Companion Software......................80

4.3.4 User Interface ....................................................81

4.3.5 Self Test Procedure..........................................84

4.3.6 Uninstalling the Program..................................86

5. Cleaning Instructions ........................................... 87

5.1 Safety Precautions.......................................................87

5.2 Cleaning………………………………………………………….………….89

6. Service and Support ............................................ 92

6.1 Returning the Instrument for Servicing......................92

6.2 Preparing the Instrument for Shipment.....................93

6.3 Instrument Disposal......................................................95

BroadLighter-M Series

User Manual

Revision 16

Safety Symbols and Terms

This section deals with information on the safety symbols

and terms which are used on the instrument or in the

manual, and gives explanations about what they stand

for. These symbols and terms indicate precautions you

must strictly follow to safely operate the instrument.

Before you begin using your BroadLighter-M,

please read the following explanations:

The WARNING sign denotes a hazard. It

calls attention to a procedure, practice,

or the like, which, if not correctly

performed or adhered to, could result in

personal injury. Do not proceed beyond

a WARNING sign until the indicated

conditions are fully understood and

met.

The CAUTION sign denotes a hazard. It

calls attention to an operating procedure,

or the like, which, if not correctly performed

or adhered to, could result in damage to or

destruction of the entire product or part

thereof. Do not proceed beyond a

CAUTION sign until the indicated

conditions are fully understood and met.

WARNING

CAUTION

Tabla de contenidos

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario

superlum BroadLighter-M Series Manual de usuario

Manuales populares de Instrumento de medición de otras marcas