Sunstech FTM300BTUSB Manual de usuario
'.5#564#
#MVFUPPUI'.5SBOTNJUUFS
XJUI$BS$IBSHFS
1. DO NOT place objects on top of the device, as objects
may scratch the device.
2. DO NOT expose the device to dirty or
dusty environments.
3. DO NOT place the device on an uneven
or unstable surface.
4. DO NOT insert any foreign objects into the device.
5. DO NOT expose the device to strong magnetic or
electrical field.
6. DO NOT expose the device to direct sunlight as it can
damage the device. Keep it away from heat sources.
7. DO NOT store your device in temperatures higher than
40°C(104°F). The internal operating temperature for this
device is from 20°C(68°F) to 60°C(140°F).
8. DO NOT use the device in the rain.
9. Please check with your Local Authority or retailer for
proper disposal of electronic products.
10. The device and adaptor may product some heat during
normal operation of charging. To prevent discomfort or
injury from heat exposure, DO NOT leave the device on
your lap.
11. POWER INPUT RATING: Refer to the rating label on the
device and be sure that the power adaptor complies with
the rating. Only use accessories specified by the
manufacturer.
12. Clean the device with a soft cloth. If needed, dampen
the cloth slightly before cleaning. Never use abrasives or
cleaning solutions.
13. Always power off the device to install or remove
external devices that do not support hot-plug.
14. Disconnect the device from an electrical outlet and
power off before cleaning the device.
15. DO NOT disassemble the device. Only a certified
service technician should perform repair.
16. The device has apertures to disperse heat. DO NOT
block the device ventilation, the device may become hot
and malfunction as a result.
17. Risk of explosion if battery replaced by an incorrect
type. Dispose of used batteries according to the
instruction.
18. PLUGGABLE EQUIPMENT: the socket-outlet shall be
installed near the equipment and shall be easily
accessible.
European Union: Disposal Information
The symbol above means that according to local laws and regulations your product
and/or its battery shall be disposed of separately from household waste.When this
product reaches its end of life,take it to a collection point designated by local
authorities.The separate collection and recycling of your product and/or its battery
at the time of disposal will help conserve natural resources and ensure that it is
recycled in a manner that protects human health and the environment.
FMT300BTUSB User Manual
Product Overview
!
1 Channel Short press to enter frequency modulation mode. Then,
frequency glows slowly on the display. Users choose channel
in the range of 87.5 MHz and 108.0 MHz. Short press volume
buttons to adjust channel by 0.1 MHz gradually. Long press
volume buttons to adjust channel quickly. After completing
frequency adjustment, short press the button so that
frequency could be shown steadily and solidly.
!
2 LED display
!
3 Microphone
!
4 USB flash drive port
!
5 Back/Volume down a. Under Bluetooth/TF card/USB flash drive mode, short press
to decrease volume.
b. Under Bluetooth/TF card/USB flash drive mode, long press to
go back to last track.
!
6 Play/Pause/Hands- a.
Under Bluetooth/TF card/USB Flash drive mode, short press to
play and pause music, indicator around it glows once.
free b. Under Bluetooth mode, short press to receive and end phone
calls, indicator around it works like breathing light…
!
7 Forth/Volume up a. Under Bluetooth/TF card/USB flash drive mode, short press
to increase volume.
b. Under Bluetooth/TF card/USB flash drive mode, long press to
move to next track.
!
8 USB charging port
!
9 AUX port
!
10 TF card port
Power on
Plug car charger into car cigarette lighter, LED display lights up. Adjust the
frequency of car and transmitter to the same to match.
TF card/USB flash drive mode
Plug TF card/USB flash drive to play music. Short press volume buttons to increase or
decrease volume, long press to go back to last track or move to next step. Short press
“Play/Pause”button to play or pause music, long press to transfer to different playing
mode, such as put a song on a loop, play all the music repeatedly. Double click to
transfer to different EQ mode. Short press “CH”button to adjust frequency. Long
press “CH”to transfer to different mode.
Bluetooth mode
After transferring to Bluetooth mode, it starts searching previous paired Bluetooth
device. If it fails to connect, it begins pairing other Bluetooth devices. In this case,
turn on your Bluetooth device to search. PIN code is “0000”. Music streams after
pairing successfully. Short press “play/pause”button to receive or end phone calls.
Long press “play/pause”button to transfer phone call from transmitter to cell
phone. Double click “play/pause”button to dial the last phone call. Short press “CH”
to adjust frequency, long press to transfer to other modes.
AUX mode
Under any mode, plug one end of audio cable into AUX port of transmitter and the
other end into audio slot of Mobile Phone, Notebook, Tablet PC, MP3/MP4 Player
etc. After that, you’ll be able to enjoy the music. Short press “CH”to adjust
frequency, long press to transfer to other modes.
USB charging mode
Plug one end of charging cable into USB port, and the other end into cellphone to
charge. Pull out when cell phone is fully charged.
Warning
1. Please make sure that voltage of car cigarette lighter is 12-24V, or it will make
the product work abnormally or even destroy the product. If the voltage is
lower than 12V, LED display of transmitter shows current voltage and glows.
To continue use product, please press rotatory button.
2. While choosing channel, please avoid strong signal station to in case of
affecting sound quality.
3. If car audio fails to receive music, please check if the frequency of transmitter
and car is the same, or volume up to increase output.
4. Use car audio to adjust volume. Don’t increase too much volume, or
distortion occurs. Should distortion happens, volume down to resume.
5. If Bluetooth device of Mobile Phone, PC etc fails to link to headphone or if
fails to playing music after being connected, the user shall check if he/she
enters the correct PIN code or if Bluetooth device of his/her Mobile Phone,
PC etc supports A2DP.
6. For safety reason, please pull out car charger while not using.
Specification
Input DC 12"24V
Current <100MA
Output ≤5V/2.1A
FM range 87.5"108.0MHz
Transmitting distance #5 meters
Frequency 20Hz-15KHz
Bluetooth Version V2.1+EDR
Bluetooth connection ≤10 meters
Working temperature 0"60!
Made in China
Ō
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Idiomas:
Otros manuales de Transmisor de Sunstech
Manuales populares de Transmisor de otras marcas
Dejero
Dejero EnGo 3x Manual de usuario
Rosemount
Rosemount 4600 Manual de usuario
Speaka Professional
Speaka Professional 2342740 Manual de usuario
trubomat
trubomat GAB 1000 Manual de usuario
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manual de usuario
Rondish
Rondish UT-11 Manual de usuario
