Sunshower SOLO Manual de usuario
SUNSHOWER SOLO
INSTALLATION MANUAL
Before installing the Sunshower read this installation manual
EN
18
serial sticker
INTRODUCTION
Congratulations with the purchase of your Sunshower Solo. With the Sunshower
Solo you will enjoy the infrared light in your own bathroom! Infrared warmth is very
comfortable, it stimulates the blood circulation and has a healing effect on your
muscles and joints. With the Sunshower Solo you will turn your bathroom easily
into a functional infrared cabin that you can use every day. The Sunshower Solo is
made from high quality materials and has a stylish nish.
Relax, enjoy and experience the Sunshower feeling!
The Sunshower is a safe system and meets all the CE requirements. Read the user
manual carefully before you use the appliance and save it for future reference.
CONTENTS OF THE PACKAGE
• Sunshower Solo
• Bottom bracket
• Top bracket, bolt M8x25
• Waterproof cable socket
• Mounting bag
INSTALLATION SUMMARY
We recommend that you adhere to the following order to install the Sunshower:
1. Determine the location 3
2. Place the brackets 4
3. Connect the electricity 9
4. Install the Sunshower Solo 14
Revisie A
19
1. DETERMINE THE LOCATION
Distance from the glass pane to the heart of the showerhead.
For a good result the distance between the glass pane of the Sunshower and the
shower head should be about 40 cm.
Determine the mounting height of the Sunshower Solo.
For users between 1.60 m and 1.90 m you can use the average suspension height of
52 cm.
For individuals that are smaller or larger than described above, the mounting height
(in cm) may be determined as follows:
Body Height - 125 cm.
520
400
90°
20
2. PLACE THE BRACKETS
Bottom bracket
1. Starting situation
2. Mark the bracket
3. Drill the holes
4. Place the plugs
5. Attach the bracket with the screws
520
1. Starting situation
2. Mark the bracket
4x
21
Ø 6
3. Drill the holes
4. Place the plugs
5. Attach the bracket with the screws
4x
4x
4x
22
Mount the top bracket on the left or right wall
1. Starting situation
2. Mark the bracket
3. Drill the holes
4. Place the plugs
5. Attach the bracket with the screws
6. Fit the bolt
1. Starting situation
2. Mark the bracket
1000
19
23
3. Drill the hole
4. Place the plug
5. Attach the bracket with the screw
Ø 6
1x
1x
1x
24
6. Fit the bolt
Screw the bolt as far as is depicted in the picture above.
1x
25
3. CONNECT THE ELECTRICITY
There are three ways to connect the electricity, choose A, B or C.
A. Connect the electricity in another room
You drill a hole into an adjoining room. The cable is out of sight.
B. Place the cable in the wall under the tile
This is only possible in a bathroom to be renovated. The cable is out of sight.
C. Connect the electricity in the bathroom
The cable is visible.
The Sunshower Solo has a cable of 4 meters.
A. Connect the electricity in another room
1. Mark the hole
2. Drill the hole
3. Bring the cable through the hole to the adjacent room
4. Caulking the cable in the bathroom
1000
40
1. Mark the hole
26
2. Drill the hole
4. Caulking the cable in the bathroom
Ø 10
Make sure there is 60 cm cable between the wall and the Sunshower.
3. Bring the cable through the hole to the adjacent room
Shower
Adjacent room
Wall
Cable
Caulking
60
Tabla de contenidos
Otros manuales de Calentador de Sunshower
Sunshower
Sunshower DELUXE WHITE Manual de usuario
Sunshower
Sunshower PURE p893 Manual de usuario
Sunshower
Sunshower PURE XL Manual de usuario
Sunshower
Sunshower P1220 Manual de usuario
Sunshower
Sunshower COMBI WHITE Manual de usuario
Sunshower
Sunshower DELUX Manual de usuario
Sunshower
Sunshower PURE XL Manual de usuario
Sunshower
Sunshower DELUXE HEALTH Manual de usuario
Manuales populares de Calentador de otras marcas
Empire Heating Systems
Empire Heating Systems WCC65 Manual de usuario
Wetekom
Wetekom 92 86 43 Manual de usuario
Desa
Desa SPC170-F Manual de usuario
Watlow
Watlow Watrod Electric Tubular Heaters Manual de usuario
Haverland
Haverland ECO-DRY GPS Series Manual de lista de piezas
Stelpro
Stelpro ASILVC2060 Series Manual de usuario