Sunny SF-E3803 Manual de usuario

OZONE MAGNETIC ELLIPTICAL

SF-E3803

USER MANUAL

IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your

satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE

CONTACTED US: [email protected] or 1- 877 - 90SUNNY (877-907-8669).

IMPORTANT SAFETY INFORMATION

We thank you for choosing our product. To ensure your safety and health, please use this

equipment correctly. It is important to read this entire manual before assembling and using the

equipment. Safe and effective use can only be achieved if the equipment is assembled,

maintained, and used properly. It is your responsibility to ensure that all users of the equipment

are informed of all warnings and precautions.

1. Before starting any exercise program, you should consult your physician to determine if you

have any medical or physical conditions that could put your health and safety at risk or prevent

you from using the equipment properly. Your physician’s advice is essential if you are taking

medication that affects your heart rate, blood pressure, or cholesterol level.

2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health.

Stop exercising if you experience any of the following symptoms: pain, tightness in your chest,

irregular heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of nausea. If

you do experience any of these conditions, you should consult your physician before

continuing with your exercise program.

3. Keep children and pets away from the equipment. The equipment is designed for adult use

only.

4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet.

To ensure safety, the equipment should have at least 2 feet (60 CM) of free space all around it.

5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of

the equipment can only be maintained if it is regularly examined for damage and/or wear and

tear.

6. Always use the equipment as indicated. If you find any defective components while

assembling or checking the equipment, or if you hear any unusual noises coming from the

equipment during exercise, discontinue use of the equipment immediately and do not use until

the problem has been rectified.

7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may

become entangled in the equipment.

8. Do not place fingers or objects into the moving parts of the equipment.

9. The maximum weight capacity of this unit is 220 pounds (100 KG).

10.The equipment is not suitable for therapeutic use.

11.To avoid bodily injury and/or damage to the product or property, proper lifting and moving are

required.

12.Your product is intended for use in cool and dry conditions. You should avoid storage in

extreme cold, hot or damp areas as this may lead to corrosion and other related problems.

13.This equipment is designed for indoor and home use only; it is not intended for commercial

use.

EXPLODED DIAGRAM 1

11L

11R

19 20

58 23

24 20

25L

25R

58 23

28 29

313228

3029

38 39

42L

31 41

46L47 48 49L 5051L

52 51R

49R

484746R

41 42R

54 55

23 23

EXPLODED DIAGRAM 2

63 65

6162

56 57

59L

59R

81 83 84

PARTS LIST

No.

Description

Spec.

Qty.

No.

Description

Spec.

Qty.

Computer

Bolt

M10*50

Link Wire of

Computer

46L/R

Pedal Bolt (L/R)

1/2”

Screw

M5*10

Wave Washer

D17

Pulse

Φ25

Bushing

Φ24*20*Φ16.1

Middle Handlebar

49L/R

U Bracket (L/R)

Screw

ST4.2*19

Spring Washer

1/2’’

End Cap

Φ25

51L/R

Nylon Nut (L/R)

1/2’’

Small Cover

End Cap

S19

Bolt

M8*30

Tension Control Knob

Spring Washer

Screw

M5*16

Foam Grip

Arc Washer

D5*Φ20*1.5*R30

11L/R

Handlebar (L/R)

Crank Cover

Foam Grip

Screw

ST4.2*19

End Cap

Φ28

Arc Washer

D8*Φ20*1.5*R16

Handle Pulse

Wire

59L/R

Chain Cover (L/R)

Upright Post

Nut

Trunk Wire

Washer

End Cap

S13

Left Collar Housing

Hexagon Bolt

M8*20

Collar Ball

Washer

D8*Φ32*2

Collar Housing

Alloy Wrap 2

Φ32*Φ19*28

Right Collar Housing

Carriage Bolt

M8*40

Washer

Arc Washer

D8*Φ20*2*R30

Belt Wheel

Domed Nut

Belt

Long Spacer

Hexagon Nut

25L/R

Swing Rod (L/R)

Bearing

6000

Screw

M8*16

Axle

Screw

ST4.2*16

Hexagon Flange Nut

M10

End Cap

S17

Nut

M10*2

Bolt

M10*60

Flywheel

Bushing

Φ14*12.5*Φ10.1

Nylon Nut

Washer

D10*Φ20*2

Tension Spring

Φ2.5*Φ16*72.5*N

Nylon Nut

M10

Crank

Carriage Bolt

M8*72

Bolt

End Cap

Φ60

Steel Bracket

Front Stabilizer

Idler Wheel

Rear Stabilizer

Hexagon Bolt

M6*16

End Cap

Φ60

C-clip

D12

Sensor Wire

Spring Washer

Tension Cable

Washer

D6*Φ16*1.5

Main Frame

Axle

End Cap

J40*25

Magnetic Board

42L/R

Pedal Tube (L/R)

Tension Spring

Φ1.2*Φ10*50*N2

Hexagon Bolt

M10*45

Plastic Lattice Magnet

Pedal

Magnet

HARDWARE PACKAGE

#33 M8*72 4PCS

#22 d8*Φ20*2*R30 8PCS

#23 M8 8PCS

#26 M8*16 4PCS

#9 d8 2PCS

#46 L/R 1/2" 2PCS

#47 d17 2PCS

#50 1/2" 2PCS

#51 L/R 1/2" 2PCS

#32 M10 4PCS

#43 M10*45 4PCS

#21 M8*40 4PCS

#17 S13 2PCS

#28 S17 6PCS

#8 M8*30 2PCS

#58 d8*Φ20*1.5*R16 4PCS

#7 1PC

#52 S19 2PCS

S13-14-15

S6 S17-19

Ordering Replacement Parts (U.S. and Canadian Customers only)

Please provide the following information in order for us to accurately identify the part(s) needed:

✓The model number (found on cover of manual)

✓The product name (found on cover of manual)

✓The part number found on the “EXPLODED DIAGRAM” and “PARTS LIST” (found near the

front of the manual)

Please contact us at [email protected] or 1- 877 - 90SUNNY (877-907-8669).

No.

Description

Spec.

Qty.

No.

Description

Spec.

Qty.

U Stopper

Shipping Tube

End Cap

Spanner

S13-14-15

Sensor Socket

Allen Wrench

Nut

M10*3

Allen Wrench

Bolt

M6*36

Spanner

S17-19

Hexagon Bolt

M6*36

ASSEMBLY INSTRUCTIONS

We value your experience using Sunny Health and Fitness products. For assistance with parts or

troubleshooting, please contact us at [email protected] or 1-877-90SUNNY

(877-907-8669).

S13

#33 M8*72 4PCS

#22 d8*Φ20*2*R30 4PCS

#23 M8 4PCS

S13

STEP 2:

Attach Front Stabilizer (No. 35) and Rear

Stabilizer (No. 36) onto Main Frame (No. 40)

with 4 Carriage Bolts (No. 33), 4 Domed Nuts

(No. 23), and 4 Arc Washers (No. 22). Tighten

and secure with Spanner (No. A).

STEP 1:

Unscrew the 4 Carriage Bolts (No. 33) with

Spanner (No. A) and remove the 4 Domed Nuts

(No. 23) and 2 Shipping Tubes (No. 96).

You may save these parts [Carriage Bolts (No.

33), Domed Nuts (No. 23), Shipping Tubes

(No. 96)]in case you’d like to repackage and

transport this elliptical in the future.

We value your experience using Sunny Health and Fitness products. For assistance with parts or

troubleshooting, please contact us at [email protected] or 1-877-90SUNNY

(877-907-8669).

16 53

22 26

#26 M8*16 4PCS

#22 d8*Φ20*2*R30 4PCS

22 26

STEP 3:

Connect Trunk Wire (No. 16) and Sensor Wire

(No. 38) together.

Put the cable of Tension Control Knob (No. 53)

into the cable lock of Tension Cable (No. 39).

Then,pull the resistance cable of Tension

Control Knob (No. 53) upward and force it into

the slot of metal bracket of Tension Cable (No.

39). Insert the metal fitting on the resistance

cable of Tension Control Knob (No. 53) into the

hole at the end of the slot in the metal bracket of

Tension Cable (No. 39).

After properly connecting the tension cable

assembly, attach Upright Post (No. 15) to the

tube of Main Frame (No. 40) with 4 Screws (No.

26) and 4 Arc Washers (No. 22). Tighten and

secure with Allen Wrench (No. B).

We value your experience using Sunny Health and Fitness products. For assistance with parts or

troubleshooting, please contact us at [email protected] or 1-877-90SUNNY

(877-907-8669).

25L

42L

46L 47 49L 50 51L

25R

42R 46R

51R50

49R

S19

44 43

#43 M10*45 4PCS #32 M10 4PCS

#18 M8*20 2PCS #9 d8 2PCS

#19 d8*Φ32*2 2PCS

#46L/R 1/2" 2PCS

#47 d17 2PCS

#50 1/2" 2PCS #51L/R 1/2" 2PCS

STEP 4:

Remove the pre-assembled 2 Hexagon Bolts

(No. 18), 2Spring Washers (No. 9),and 2

Washers (No. 19) from Upright Post (No. 15)

with Spanner (No. A).

Slide Swing Rods (No. 25L/R) onto Upright

Post (No. 15) with 2 Hexagon Bolts (No. 18),2

Spring Washers (No. 9),and 2Washers (No.

19) that were removed. Tighten and secure with

Spanner (No. A).

Attach Left U Bracket (No. 49L) to the Crank

(No. 77) with Left Pedal Bolt (No. 46L), Wave

Washer (No. 47). Turn the Left Pedal Bolt (No.

46L) counter-clockwise as tightly as you can with

your hand. Secure by tightening Left Nylon Nut

(No. 51L) and Spring Washer (No. 50)

clockwise. Then, use Spanner (No. D) and Allen

Wrench (No. C) to tighten securely.

Attach Right U Bracket (No. 49R) to the Crank

(No. 77) with Right Pedal Bolt (No. 46R), Wave

Washer (No. 47). Turn the Right Pedal Bolt

(No. 46R) clockwise as tightly as you can with

your hand. Secure by tightening Right Nylon

Nut (No. 51R) and Spring Washer (No. 50)

counter-clockwise. Then, use Spanner (No. D)

and Allen Wrench (No. C) to tighten securely.

Attach Pedal (No. 44) to the Pedal Tubes (No.

42L/R) with 4 Hexagon Bolts (No. 43) and 4

Nylon Nuts (No. 32).Tighten and secure with

Spanner (No. D).

We value your experience using Sunny Health and Fitness products. For assistance with parts or

troubleshooting, please contact us at [email protected] or 1-877-90SUNNY

(877-907-8669).

11R

58 23

11L

#21 M8*40 4PCS

#58 d8*Φ20*1.5*R16 4PCS

#23 M8 4PCS

#9 d8 2PCS

S13

25L 25R

#8 M8*30 2PCS

21 58 23

16 14

28 52

25L

25R

#17 S13 2PCS

#28 S17 6PCS

#52 S19 2PCS

42L

42R

#2 M5*10 4PCS

222

STEP 5:

Attach Middle Handlebar (No. 4) to Upright

Post (No. 15) with 2 Bolts (No. 8) and 2

Spring Washers (No. 9). Tighten and secure

with Allen Wrench (No. B). Then, attach

Small Cover (No. 7) onto Middle Handlebar

(No. 4).

Attach Handlebars (No. 11L/R) to the Swing

Rods (No. 25L/R) with 4 Carriage Bolts (No.

21), 4Arc Washers (No. 58),and 4 Domed

Nuts (No. 23). Tighten and secure with

Spanner (No. A).

STEP 6:

Remove the pre-assembled 4 Screws (No. 2)

from the back of the Computer (No. 1).

Connect Link Wire of Computer (No. 1b) with

Trunk Wire (No. 16). Then, attach Computer

(No. 1) to the Upright Post (No. 15) with 4

Screws (No. 2) that were removed. Tighten and

secure with Spanner (No. A).

Insert Hand Pulse Wire (No. 14) into the hole on

the back of Computer (No. 1).

Attach the End Caps (No. 17 & No. 28 & No.

52) onto Swing Rods (No. 25L/R) and Pedal

Tubes (No. 42L/R) separately.

The assembly is complete!

Tabla de contenidos

Manuales populares de Entrenador elíptico de otras marcas

Weslo

Weslo Momentum 4.0 Elliptical Manual de operación y mantenimiento

Progear Fitness

Progear Fitness Air elliptical pro 1307 Manual de usuario

Torque Fitness

Torque Fitness XPLLP Manual de usuario

Octane Fitness

Octane Fitness PRO3700C Manual de usuario

Xterra

Xterra FS5.8e Manual de usuario

Bodyguard

Bodyguard E-40 Manual de usuario

Bonn Germany

Bonn Germany Concept 2.2 Manual de usuario

Precor

Precor Resolute RSL 620 Manual de usuario

NordicTrack

NordicTrack E 9.2 Elliptical Manual de usuario

Vision Fitness

Vision Fitness X6600iNetTV Manual de usuario

Matrix

Matrix MX-A5x Manual de usuario

SportsArt Fitness

SportsArt Fitness ECO-NATURAL Elite E874 Manual de usuario

Sears

Sears FREE SPIRIT C249 30737 0 Manual de usuario

True

True FS-64 Manual de usuario

Sport-thieme

Sport-thieme ST 310 Manual de usuario

VIRTUFIT

VIRTUFIT CTR 1.1 Manual de usuario

Kettler

Kettler GIRO C 1 Manual de usuario

CIRCLE FITNESS

CIRCLE FITNESS E7 Manual de usuario