Replacing an ADC Wall Aneroid
2.
a. Remove the screw at the bottom of the basket behind
the wall aneroid.
b. Remove the aneroid.
c. Remove the top two screws connecting the basket to the
wall.
d. Slide the basket up and towards you to remove it from
the wall.
Replacing a Medline Wall Aneroid
3.
Replacing a Welch Allyn Wall Aneroid
1.
BLOOD PRESSURE MODULE WALL MOUNT REPLACEMENT GUIDE
part # 82-0064-00 Rev B.
Applicable
Hole Pattern
a. Remove the screws at the top and the bottom of the wall
aneroid.
b. Remove the aneroid.
c. Remove the screws attaching the bracket to the wall.
a. Remove the screws at the top and the bottom of the wall
aneroid.
b. Remove the aneroid.
c. Remove the screws attaching the bracket to the wall.
Applicable
Hole Pattern
Applicable
Hole Pattern
