Sumitomo Drive Technologies DeviceNet HF-520 Series Manual de usuario
PROFIBUS-DP
Inverter HF-520 Option
Installation Manual
Type: SI-P3/V-H
Manual
NOTICE
1. Make sure that this installation manual is delivered to
the end user of inverter unit.
2. Read this manual before installing or operating the
inverter unit, and store it in a safe place for
reference.
No.DM2309E-1
2
Copyright © 2015 Sumitomo Heavy Industries, LTD.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted, in any form, or by any means, mechanical, electronic, photocopying,
recording, or otherwise, without the prior written permission of Sumitomo. No patent
liability is assumed with respect to the use of the information contained herein. Moreover,
because Sumitomo is constantly striving to improve its high-quality products, the
information contained in this manual is subject to change without notice. Every precaution
has been taken in the preparation of this manual. Nevertheless, Sumitomo assumes no
responsibility for errors or omissions. Neither is any liability assumed for damages resulting
from the use of the information contained in this publication.
3
Table of Contents
1 PREFACE AND SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2 PRODUCT OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3 RECEIVING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4 PROFIBUS-DP OPTION COMPONENTS . . . . . . . . . . . . . 12
5 INSTALLATION PROCEDURE . . . . . . . . . . . . . . . . . . . . .17
6 PROFIBUS-DP OPTION DRIVE PARAMETERS . . . . . . . 26
7 PROFIBUS-DP OPTION DATA AND I/O MAPS. . . . . . . .28
8 TROUBLESHOOTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
9 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
10 WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
4
1 Preface and Safety
1 Preface and Safety
Sumitomo manufactures products used as components in a wide variety of industrial
systems and equipment. The selection and application of Sumitomo products remain the
responsibility of the equipment manufacturer or end user. Sumitomo accepts no
responsibility for the way its products are incorporated into the final system design. Under
no circumstances should any Sumitomo product be incorporated into any product or design
as the exclusive or sole safety control. Without exception, all controls should be designed to
detect faults dynamically and fail safely under all circumstances. All systems or equipment
designed to incorporate a product manufactured by Sumitomo must be supplied to the end
user with appropriate warnings and instructions as to the safe use and operation of that part.
Any warnings provided by Sumitomo must be promptly provided to the end user. Sumitomo
offers an express warranty only as to the quality of its products in conforming to standards
and specifications published in the Sumitomo manual. NO OTHER WARRANTY,
EXPRESSED OR IMPLIED, IS OFFERED. Sumitomo assumes no liability for any
personal injury, property damage, losses, or claims arising from misapplication of its
products.
1 Preface and Safety
5
◆Applicable Documentation
The following manuals are available for the PROFIBUS-DP Option:
Option Unit
Inverter
HF-520 Series Option
PROFIBUS-DP
Installation Manual
Manual No.: DM2309E
(this book)
Read this manual first.
The installation manual is packaged with the
PROFIBUS-DP Option and contains a basic overview
of wiring, settings, functions, and fault diagnoses.
Inverter
HF-520 Series Option
PROFIBUS-DP
Technical Manual
Manual No.: DM2310E
The technical manual contains detailed information
and command registers.
To obtain the technical manual access these sites:
Japan: http://www.shi.co.jp/ptc/
1 Preface and Safety
6
◆Terms
Note: Indicates a supplement or precaution that does not cause drive damage.
Inverter
HF-520 Technical Manual
Manual No. : DM2302E
This manual describes installation, wiring, operation procedures, functions,
troubleshooting, maintenance, and inspections to perform before operation.
To obtain instruction manuals for Sumitomo products access the site below:
http//www.shi.co.jp/ptc/
HF-520 Operating and Maintenance Manual
Manual No. : DM2301E
This guide is packaged together with the product. It contains basic information
required to install and wire the drive. This guide provides basic programming and
simple set-up and adjustment.
Drive: HF-520 Series
PROFIBUS-DP Option: HF-520 Series Option PROFIBUS-DP (SI-P3/V-H)
STOP
(Hz)
(Hz)
(A)
(V)
FreqReference
FWD/ REV Sel
OutputFreq
OutputCurrent
SelectedMonitor
Monitor
Verify
SetUpGuide
ParameterSet
Auto-Tuning
HF-520
:
:
:
:
:
:
:
:
:
:
Risque de décharge
électrique.
Lire le manuel avant l'installation.
Attendre 5 minutes après la coupurede l'alimentation,
pour permettre la décharge des condensateurs.
Pour répondre aux exigences , s assurer que le
neutre soit relié à la terre, pour la série 400V.
Read manual before installing.
Wait 5 minutes for capacitordischarge after
disconnecting power supply.
Toconform to requirements, make sure
to ground the supply neutral for 400V class.
Risk of electric shock.
WARNING
AVERTISSEMENT
1 Preface and Safety
7
◆Registered Trademarks
• PROFIBUS-DP is a registered trademark of PROFIBUS International.
• Other company names and product names listed in this manual are registered trademarks
of those companies.
◆Supplemental Safety Information
Read and understand this manual before installing, operating, or servicing this option unit.
The option unit must be installed according to this manual and local codes.
The following conventions are used to indicate safety messages in this manual. Failure to
heed these messages could result in serious or possibly even fatal injury or damage to the
products or to related equipment and systems.
DANGER
Indicates a hazardous situation, which, if not avoided, will result in death or serious
injury.
WARNING
Indicates a hazardous situation, which, if not avoided, could result in death or
serious injury.
CAUTION
Indicates a hazardous situation, which, if not avoided, could result in minor or
moderate injury.
NOTICE
Indicates an equipment damage message.
1 Preface and Safety
8
■General Safety
General Precautions
• The diagrams in this section may include option units and drives without covers or safety shields to illustrate
details. Be sure to reinstall covers or shields before operating any devices. The option board should be used
according to the instructions described in this manual.
• Any illustrations, photographs, or examples used in this manual are provided as examples only and may not apply
to all products to which this manual is applicable.
• The products and specifications described in this manual or the content and presentation of the manual may be
changed without notice to improve the product and/or the manual.
DANGER
Heed the safety messages in this manual.
Failure to comply will result in death or serious injury.
The operating company is responsible for any injuries or equipment damage resulting
from failure to heed the warnings in this manual.
NOTICE
Do not modify the drive or option circuitry.
Failure to comply could result in damage to the drive or option and will void warranty.
SUMITOMO is not responsible for any modification of the product made by the user.
This product must not be modified.
Do not expose the drive to halogen group disinfectants.
Failure to comply may cause damage to the electrical components in the option unit.
Do not pack the drive in wooden materials that have been fumigated or sterilized.
Do not sterilize the entire package after the product is packed.
1 Preface and Safety
9
■Option Unit Label Warnings
Warning information is displayed on the option unit as shown in the figure below. Follow all
warnings and safety instructions when using the product.
Figure 1
Figure 1 Warning Labels
■Warning Contents
Warning
information
AVERTISSEMENT
Lire le manuel avant l'installation.
Attendre 5 minutes apres la coupure de l'alimentation,
pour permettre la decharge des condensateurs.
Pour repondre aux exigences , s assurer que le
neutre soit relie a la terre, pour la serie 400V.
WARNING
Read manual before installing.
Wait 5 minutes for capacitor discharge after
disconnecting power supply.
To conform to ࠉrequirements, make sure
to ground the supply neutral for 400V class.
Risk of electric shock.
Risque de decharge
electrique.
AVERTISSEMENT
Lire le manuel avant l'installation.
Attendre 5 minutes apres la coupure de l'alimentation,
pour permettre la decharge des condensateurs.
Pour repondre aux exigences , s assurer que le
neutre soit relie a la terre, pour la serie 400V.
WARNING
Read manual before installing.
Wait 5 minutes for capacitor discharge after
disconnecting power supply.
To conform to ޓrequirements, make sure
to ground the supply neutral for 400V class.
Risk of electric shock.
Risque de decharge
electrique.
10
2 Product Overview
2 Product Overview
◆About This Product
PROFIBUS is an open digital communication system supporting a wide range of fast, time-
critical applications.
PROFIBUS-DP (Decentral Periphery) is one of the three PROFIBUS variants. DP is
dedicated to fast data communication between systems and peripherals at a field level. This
PROFIBUS-DP Option connects a drive to a field network using the PROFIBUS-DP
protocol.
PROFIBUS-DP is included into the European Fieldbus Standard EN 50170.
The network is primarily used in process and factory automation.
By installing the PROFIBUS-DP Option to a drive, it is possible to do the following from a
PROFIBUS-DP master device:
• operate the drive
• monitor the operation status of the drive
• change parameter settings
Otros manuales para DeviceNet HF-520 Series
1
Tabla de contenidos
Otros manuales de Inversor de Sumitomo Drive Technologies
Sumitomo Drive Technologies
Sumitomo Drive Technologies HF-430NEO Series Instrucciones de funcionamiento
Sumitomo Drive Technologies
Sumitomo Drive Technologies SI-232/JC-H Manual de usuario
Sumitomo Drive Technologies
Sumitomo Drive Technologies AI-V3/J-H Manual de usuario
Sumitomo Drive Technologies
Sumitomo Drive Technologies DeviceNet HF-520 Series Manual de usuario
Sumitomo Drive Technologies
Sumitomo Drive Technologies SI-485/J-H Manual de usuario
