Sumake ST-TAIS030 Series Manual de usuario

INSTRUCTION MANUAL

ITEM NO.: ST-TAIS030(50)(70) series

FOLDED TORQUE REACTION ARM

ST-TAIS030(50)(70)-I-2309F-YM

Table of contents

Feature････････････････････････････････････････

II.

Specification････････････････････････････････････

III.

Items Inspection･････････････････････････････････

IV.

Safety Precautions ･･･････････････････････････････

1. Warning･･････････････････････････････

2. Safety information･･････････････････････････････

Description･････････････････････････････････････

1. Assembly ････････････････････････････････

2. Dimension ･･････････････････････････････････

3. Working environment ･･･････････････････････････

VI.

Installation ･････････････････････････････････････

1. Installation instruction ･･････････････････････････

2. Spring tension adjustment ････････････････････････

VII.

Maintenance ･･･････････････････････････････････

I. Feature

This torque reaction arm is applicable to absorb the reaction from electric/pneumatic

screwdriver directly after working. To prevented injury for operator after working

continuously.

II. Specification

The spindle can swivel 360° and front arm can swivel around 330° for horizontal and the

vertical height can make electric/pneumatic screwdriver to the specific position. It

convinces operator to work quickly and stable also hence efficiency and avoid human

injury.

III. Item Inspection

➢Comparison

Description

Q’TY

Remark

Base plate

1set

Linear bearing set

1set

Hanger set

1set

Arm set

1set

Accessories bag

2pack

Screw x4 pcs, set screw x2set

6mmm allen key x 1pcs, plug x1pcs

IV. Safety Precautions

For the proper use of this product, avoid jeopardizing personal and property safety of the

lives of others, to prevent the occurrence of danger and be sure to read the instructions

carefully

＜Please be sure to follow instruction ＞

1. Warning：

【Prohibition Sign】， it will occur personal injury or product damaged if didn’t follow

instruction.

【Alarm Sign】Damage of properties, or injury of personal may occur if not

observed.

2. Safety information：

Follow instructions depicted in the manual and operate the machine correctly.

DO NOT let contaminants such as water or oil enter into the machine.

DO NOT dismantle or modification.

Keep hand away from institutional movements, range of movement when assembly.

Please adjust the spring tension against weight of suspend tool.

Please maintain and clean the component regularly.

V. Description

1. Assembly：

Please follow the steps below to assemble the five major parts (as shown in the pictures):

(A). Take 4PCS M6*25 screw (#15) from the (05) accessories bag to install the base (01) on a

stable work table. See FIG.1

(B). Insert the spindle linear bearing set (02) into the base (01) until the bottom end touches the

table.

(C). Tighten the set screw x2pcs (#9).

(D). Loosen the 2 pcs screw include washer, turn the board (#16) clockwise and align 2 screw

holes then tighten.

(E). Remove screw(#4), washer(#14)(#50) from spindle (#6).

(F). Insert the Hanger set (03) to top of spindle (#6).

NOTE: The direction of spring balancer base plate must be spindle direction. See FIG. 2

(G). Then assemble the screw (#4), washer (#14)(#50) to hanger (#3).

And ensure the hanger can swivel smoothly. Using the plug (#53) from accessories pack (05) to top

of hanger.

(H). Please assemble the cable of spring balancer to screw (#14) and washer (#4) and

through hanger hole (#16) of linear bearing set (02).

NOTE:

* The cable needs pull downward.

* The tooth at the front end of the cable must be inserted into the hanger hole (#16)

(I). Install the Rear arm (#17) of arm set groove by screw from accessories bag (05).

2pcs M8x35 hex screw for ST-TAIS030 include washer.

2pcs M10x40 include washer.

NOTE: The label direction must be outward and edge of rear arm (#17) needs match

groove of Linear bearing (#5). See FIG.3

(J).Please insert 6mm allen key (#41) from accessories bag (05) into spring balancer to adjust

spring tension.

Please refer to page 11 for spring tension adjustment.

2. Dimension：

Model：ST-TAIS030

Model：ST-TAIS050, ST-TAIS070

3. Working environment：

Area

indoor

Max. torque

ST-TAIS030

Net

Weight

Approx. 6.3 kg / 6 ㎏

150 kgf-cm (14.7Nm)

ST-TAIS050

Approx.9.2 kg / 8.9 kg

250 kgf-cm (24.5Nm)

ST-TAIS070

Approx.9.2 kg / 8.9 kg

250 kgf-cm (24.5Nm)

Air pressure

5 ~ 6kg/cm²

Temperature

-5℃~ 60℃（No freezing）

Humidity

20% ~ 90%（No condensation）

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Herramientas de Sumake

Sumake

Sumake ST-CH314R Manual de usuario

Sumake

Sumake HR3 Series Manual de usuario

Sumake

Sumake ST-P6634SA Manual de usuario

Sumake

Sumake SA-CL110 Manual de usuario

Sumake

Sumake HR3 Series Manual de usuario

Sumake

Sumake ST-2561 Manual de usuario

Sumake

Sumake ST-2280 Manual de usuario

Sumake

Sumake ST-6400 Manual de usuario

Sumake

Sumake SF30A Series Manual de usuario

Sumake

Sumake SA-4013 Manual de usuario

Sumake

Sumake SAF-100 Manual de usuario

Sumake

Sumake SF501 Manual de usuario

Sumake

Sumake ST-NH620 Manual de usuario

Sumake

Sumake HR3 Series Manual de usuario

Sumake

Sumake CB-32A Manual de usuario

Sumake

Sumake SF30T Series Manual de usuario

Sumake

Sumake ST-P6634S Manual de usuario

Sumake

Sumake ST-2557 Manual de usuario

Sumake

Sumake ST-2510 Manual de usuario

Sumake

Sumake ST-2002A Manual de usuario

Sumake

Sumake HTT-22 Manual de usuario

Sumake

Sumake ST-2516 Manual de usuario

Sumake

Sumake ST-2320/R Especificaciones

Sumake

Sumake ST-TB100 Manual de usuario

Manuales populares de Herramientas de otras marcas

Martor

Martor SECUNORM 175 Manual de usuario

ERKCO

ERKCO 1000 Manual de usuario

jbc

jbc N4473 Manual de usuario

FEINMETALL

FEINMETALL FZWZ-SET-001 Manual de usuario

Worx Professional

Worx Professional Sonicrafter WU676 Manual de usuario

Gage Bilt

Gage Bilt GB713SH Manual de usuario

Hilti

Hilti DX 9-ENP Manual de usuario

norbar

norbar NORTRONIC 34399 Manual de usuario

BGS technic

BGS technic 8578 Manual de usuario

Makita

Makita DHR241 Manual de usuario

Motor Guard

Motor Guard JMB-1250 Manual de usuario

Power Adhesives

Power Adhesives 805-12 Manual de usuario

Clemco

Clemco 24189 Manual de usuario

VVG

VVG VNG 903 Series Manual de usuario

Hilti

Hilti FX 3-A Manual de usuario

Grizzly

Grizzly H6472 Manual de usuario

axing

axing BWZ 5-02 Manual de usuario

Dh-Robotics

Dh-Robotics RGI-100 Cómo utilizar