Subject Link RPT-1008G-X2 Instrucciones de uso

Industrial Unmanaged Ethernet Switch Hardware User Manual

RPT-1008G(-T)-X2

Version 1.0.0

Subject Link Inc

9F-1, No. 77, Sec 4., Nangjing E. Rd, Taipei City, 10580, Taiwan, R.O.C.

Tel: +886 935 672 398

Mail: [email protected]

Web: www.sbjlink.com

Contents 
 
 
Overview ...........................................................................................................................................................1 
Package Check List...................................................................................................................................1 
Hardware Description..................................................................................................................................2 
Front Panel Instruction ..........................................................................................................................2 
Dimensions..................................................................................................................................................2 
Top View ......................................................................................................................................................3 
LED Instruction ..........................................................................................................................................3 
Earth Grounding........................................................................................................................................3 
Hardware Installation...................................................................................................................................4 
Wiring Power Inputs ...............................................................................................................................4 
Wiring Fault Alarm...................................................................................................................................4 
Double-Secure Power Input Fault Alarm........................................................................................4 
Mounting .....................................................................................................................................................5 
Installation Steps......................................................................................................................................6 
Specification.....................................................................................................................................................7 
 

Overview

This user manual is for "RPT-1008G(-T)-X2" with extended operating temperature (-40°C ~ 75°C

(-40°F ~ 167°F)). This is an industrial unmanaged gigabit Ethernet switch with the following hardware

features:

Interface

▪MDI/MDI-X function supported on all copper ports

▪Embedded 8x Gigabit Ethernet ports

▪Store-and-forward switching architecture

Switch Properties

▪Up to 4K MAC Address Table supported

▪Up to 1.5Mbits Packet Buffer supported

Power Input

▪Redundant 12-48VDC power

Temperature

▪Extended operating temperature: -40°C ~ 75°C (-40°F ~ 167°F)

▪Storage temperature: -40°C ~ 85°C

Mechanical Construction

▪Class IP30 protection

▪DIN-Rail Mounting

PACKAGE CHECK LIST

The "RPT-1008G(-T)-X2" is shipped with the following items. Ensure that all the items are in the

box. If any item is missing or damaged, contact us for assistance.

▪RPT-1008G(-T)-X2 switch x 1

▪Protective caps for 8x copper ports

▪Wall mount brackets and screws (Optional)

Hardware Description

FRONT PANEL INSTRUCTION

The following picture is the front panel for "RPT-1008G(-T)-X2".

DIMENSIONS

WxHxD: 29x140x98 mm

TOP VIEW

This is the top view of the RPT-1008G(-T)

containing the ground, power inputs, fault

alarm relay.

LED INSTRUCTION

System LEDs

LED

Color

Status

Description

PWR1

Green

Power is supplied on the power input 1.

Off

Power is not supplied on the power input 1.

PWR2

Green

Power is supplied on the power input 2.

Off

Power is not supplied on the power input 2.

Fault

Red

The power input 1 or power input 2 is failed.

Off

The power input 1 and power input 2 are in normal operation.

Interface Status LEDs

LED

Color

Status

Description

LAN Port

P1 to P8

(1000M)

Green

The 1000Mbps link of the port is active.

Flashing

Data is transmitted on the port at 1000Mbps.

Off

The 1000Mbps link of the port is inactive.

LAN Port

P1 to P8

(10/100M)

Amber

The 10/100Mbps link of the port is active.

Flashing

Data is transmitted on the port at 10/100Mbps.

Off

The 10/100Mbps link of the port is inactive.

EARTH GROUNDING

The earth grounding and cautious wire routing are helpful to suppress the effects of noise from

electromagnetic interference (EMI). The switch has to be installed on a well-grounded surface, for

instance, a metal panel.

The location of earth ground screw is usually near the location of power

inputs, for example:

▪Top side for most of din-rail models

▪Rear side for most of rack-mount models

▪Front side for most of M12 models

Note: Connect the ground from the ground screw to the surface of ground before wiring the

power inputs.

Hardware Installation

WIRING POWER INPUTS

1. Insert the positive and negative wires into the PWR1 (+,-) and

PWR2 (+,-) on the 6-contact terminal block connector.

2. Tighten the screws to prevent the wires from loosening.

WIRING FAULT ALARM

1. Insert the wires into the left two contacts of the 6-contact

terminal block (Fault Alarm Relay).

2. Tighten the screws to prevent the wires from loosening.

3. The relay will detect the power and link failure.

4. Users can connect the relay to an alarm and buzzer so that

when the relay forms an open circuit, the users will be notified.

DOUBLE-SECURE POWER INPUT FAULT ALARM

The power inputs are designed as a "common

negative", which implies that the negative

input is connected, but "double-secure" is

supported to prevent the unnotified failure of

power from one of the negative inputs. Should

one of the negative power inputs fail, the

system will detect the failure. NOTE: the

system will trigger an event occurrence only if

the user has set the fault alarm or event log

for power.

MOUNTING

Din-Rail Mounting

a. Screw the DIN-Rail bracket to the switch.

b. Insert the top of the DIN-Rail bracket to the DIN-

Rail track.

c. Pull down the DIN-Rail bracket to the DIN-Rail track and check if it is mounted tightly on the DIN-

Rail track.

Wall Mounting

a. Remove the DIN-Rail bracket.

b. Screw the wall mount kits to the switch.

INSTALLATION STEPS

1. Unpack

The switch is well packed and shipped to our customers. Unpack it from the box.

2. Check Content Items

Please make sure all the items listed in the "Package Check List" are in the box.

3. Mounting

The DIN-Rail is screwed on the switch by default. If the DIN-Rail is not screwed to the switch,

refer to the "DIN-Rail Mounting" section to install it manually.

The Wall mount brackets are optional items. If you need the wall mount brackets, contact us

for assistance. To install the switch on the wall, refer to the "Wall Mounting" section.

4. Power On

To power on the switch, users must prepare a power supply and wire the power input. Refer

to the "Wiring Power Inputs" section.

The power LEDs are described in the "LED Instruction" section.

5. Connect

To connect to the switch, users need a RJ45 cable. Insert the RJ45 cable into one of the switch

ports and insert the other end to the host such as PC.

The link LEDs are described in the "LED Instruction" section.

6. Check LEDs

We recommend the users to check the status of LEDs in the "LED Instruction" section. If all the

LEDs are in the normal state, the installation is completed.

Specification

Technology

Standards

IEEE 802.3 10BaseT

IEEE 802.3u 100BaseTX

IEEE 802.3ab 1000BaseT

IEEE 802.3x Flow Control

Processing Type

Store and Forward

Transfer Rate

14,880pps for Ethernet port

148,800pps for fast Ethernet port

1,488,000pps for gigabit Ethernet port

Transmission Distance

Up to 100M (Fast Ethernet)

Transmission Speed

Up to 1000Mbps

Switch Properties

Switch Fabric

16Gbps

Priority Queues

Jumbo Frame

MAC Table Size

Packet Buffer

1.5Mbits

Interface

RJ45 Port

8x 10/100/1000T(x), auto negotiation speed duplex mode, auto

MDI/MDI-X

LED Indicators

Per unit: PWR1, PWR2, Fault

Ports: Link/Active(Green)

Alarm Contact

1x relay output with current carrying capacity of 1A @ 24 VDC

Power Requirements

Operation Voltage

12-48VDC, redundant dual inputs

Connection

1x removable 6-contact terminal block

Power Consumption

0.18A@24VDC

Protection

Overload Current Protected, Reverse Polarity Protected

Mechanical Construction

Enclosure

Steel metal

Protection Class

IP30

Dimensions

29x140x98 mm (WxHxD)

Weight

0.75 kg

Mounting

DIN-Rail Mounting

Environmental Limits

Operating Temperature

Extended: -40°C ~ 75°C (-40°F ~ 167°F)

Storage Temperature

-40°C ~ 85°C

Ambient Relative

Humidity

5 to 95%, (Non-Condensing)

Regulatory Approvals

EMI

FCC Part 15 Subpart B Class A

CE EN 55032 Class A

EMS

IEC61000-4-2 (ESD)

IEC61000-4-3 (RS)

IEC61000-4-4 (EFT)

IEC61000-4-5 (Surge)

IEC61000-4-6 (CS)

IEC61000-4-8 (Magnetic Field)

Free Fall

IEC60068-2-32

Shock

IEC60068-2-27

Vibration

IEC60068-2-6

Green

RoHS Compliant

MTBF

>100,000 hours

Warranty

5 Years

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Subject Link

Subject Link

Subject Link RPT-2018G-2F-X4 Series Manual de usuario

Subject Link

Subject Link RPT-2012G/GP-4F-T Instrucciones de uso

Subject Link

Subject Link RPT-2010G-2F Manual de usuario

Subject Link

Subject Link RPT-2012/P-4F-T-1 Series Manual

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario