Sub-Zero 245 Instrucciones de uso
Planning Information
Undercounter Model
245 Refrigerator / Freezer
1
Dimensions in parentheses are in
millimeters unless otherwise specified.
11/06
Aside from the full-size units
Sub-Zero offers in its Built-In and
Integrated lines of refrigeration, we
round out our product line-up with
aline of traditional Undercounter
refrigeration which meets all of the
exacting standards you have
grown to expect from Sub-Zero.
This beautifully crafted under-
counter refrigerator/ freezer is a
must for that special bar area in
the home.It features an automatic
ice maker giving your client more
than enough ice for those special
parties, auto defrost and Sub-Zero
quality.
Panels are available from Sub-Zero
but the beauty of this model is
really seen when you apply
custom panels.
Automatic ice
maker
Stationary glass
shelves
Adjustable refrigera-
tor control
Serial and model
number plate
Interchangeable
door hinge
Front venting with
removable kickplate
Removable ice
bucket
Interior freezer
light
Stationary door
shelves
MODEL 245
Undercounter refrigerator/freezer combination unit
24" (610) depth-true design for a complete built-in look
Door accepts custom panels
Smooth surface, easy-to-clean bright interior
Automatic ice maker provides an ample supply of
crescent-shaped ice
Automatic defrost
Interchangeable hinge allows door swing to be reversed
in the field
Front venting with removable kickplate allows unit to be
serviced from the front
Solid core door with magnetic gasket and door closer
UL approved for US and Canada
Two, five and twelve year residential warranty—
exclusions apply; warranty information can be found on
our website, subzero.com
Model 245
Adjustable freezer
control
Planning Information
Undercounter Model 245
2
Dimensions may vary by ± 1/8"(3).
Dimensions in parentheses are in
millimeters unless otherwise specified.
237/8"
(606)
24"
(610)
2513/16"
(656)
34"
(864)
24"
(610)
SPECIFICATIONS
Model 245 Undercounter Refrigerator / Freezer
with Automatic Ice Maker
Overall Width 23 7/8"(606)
Overall Height 34 " (864)
Overall Depth 24" (610)
Refrigerator Capacity 3 cu ft (85 L)
Freezer Capacity 1.9 cu ft (54 L)
Minimum Height (levelers in) 34 " (864)
Door Swing Clearance 25 13/16"(656)
Electrical Requirements 115 V AC, 60 Hz, 15 amp circuit
Annual Energy Usage 444 kWh / $ 41
(based on 9.06 cents per kilowatt hour)
Shipping Weight 139 lbs (63 kg)
Special Note Door accepts custom wood panels
or panels are available as sales accessories
Specifications are subject to change without notice.
OVERALL DIMENSIONS
OPTIONAL DOOR PANELS
White Enamel Steel
Almond Enamel Steel
Classic Stainless Steel
ACCESSORIES
Hinge conversion kit
Accessories are available through your
Sub-Zerodealer. To obtain local dealer
information, visit the Locator section of
our website, subzero.com.
Planning Information
Undercounter Model 245
Dimensions in parentheses are in
millimeters unless otherwise specified. 3
INSTALLATION SPECIFICATIONS
DIMENSIONS
Finished Rough Opening Width 24" (610)
Finished Rough Opening Height 341/2"(876)
Finished Rough Opening Depth 24" (610)
Location of Electrical Within shaded area (front view)
Location of Water Supply Within shaded area (top view)
See Installation Instructions shipped with unit for detailed specifications.
341/2"
(876)
ROUGH
OPENING
HEIGHT
24"(610)
ROUGH OPENING
WIDTH
1"
(25)
7"
(178)
7"
(178)
E
2"
(51)
24"
(610)
ROUGH
OPENING
DEPTH
TOP VIEW
FRONT VIEW
12"
(305)
WATER SUPPLY
LOCATION
LOCATE ELECTRICAL
WITHIN SHADED AREA
1/2"
(13)
Planning Information
Undercounter Model 245
Dimensions in parentheses are in
millimeters unless otherwise specified. 4
INSTALLATION NOTES
Refer to the illustrations and specifications
for overall dimensions, finished rough opening
dimensions and installation specifics.
The Model 245 lower hinge extends out
from the side of the unit in the area of the kick-
plate. When the unit is installed tightly against a
full-depth panel or cabinet, there can be inter-
ference. Refer to the full-scale illustration on
page 6.
For Model 245 with automatic ice maker,
rough in the water supply line. Connect a 1/4"
OD copper line to the house supply, being sure
to use an easily accessible shut off valve
between the supply and the unit.
Do not use self-piercing valves. A saddle
valve kit (4200880) is available from your
Sub-Zero dealer. To obtain local dealer informa-
tion, visit the Locator section of our website,
subzero.com.
Aline filter is required when water condi-
tions have a high sediment content. The ice
maker operates on water pressure of 20 psi
(1.4 bar) to 100 psi (6.9 bar). In some cases a
reverse osmosis water filter system maynot be
able to maintain the minimum water pressure
consistently.
A115 V AC, 60 Hz, 15 amp fused electrical
supply is required. It is recommended that a
separate circuit, serving only this appliance, be
provided.
All Undercounter models are equipped with a
power supply cord with a 3-prong grounding
plug which must be plugged into a mating
3-prong grounding type wall receptacle. Locate
electrical within the shaded area shown in the
illustration on page 3.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
Refer to the Undercounter Installation
Instructions packed with the appliance, which
provides step-by-step procedures for making
sure the unit is installed properly.
Planning Information
Undercounter Model 245
Dimensions in parentheses are in
millimeters unless otherwise specified. 5
FRAMED PANELS
Framed door panels must be 1/4"(6) thick around the
perimeter. If the panel is thicker than 1/4"(6), an edge must
be routed around the panel to ensure a proper fit. The
edge must be 1/4"(6) thick and you must allow 3/8"(10)
around the perimeter for the frame. Model 245 requires no
handle recess. Refer to the illustrations on this page.
IMPORTANT NOTE: The Model 245 lower hinge extends
out from the side of the unit in the area of the kickplate.
When the unit is installed tightly against a full-depth panel
or cabinet, there can be interference. Refer to the full-scale
illustration on pge 6.
The overlay door panel design application is not available
for the Model 245.
IMPORTANT NOTE: The weight of the panel cannot
exceed 20 lbs (9 kg).
FRAMED PANEL DIMENSIONS
Door Panel Width 231/2"(597)
Door Panel Height 281/8"(714)
Maximum Panel Weight 20 lbs (9 kg)
W
H
Framed Door Panel
Framed door panel 1/4" (6) thick or less
Framed door panel thicker than 1/4" (6)
PANELS 1/4"(6) THICK OR LESS
1/4"(6) Panel
Trim reveal
1/4"(6) min
PANELS THICKER THAN 1/4"(6)
Trim reveal
1/4"(6) min
Rout to 1/4"(6)
thickness
Planning Information
Undercounter Model 245
Dimensions in parentheses are in
millimeters unless otherwise specified. 6
233/4"(603)
TO BACK OF UNIT
237/8"(606)
WIDTH OF UNIT
DOOR
TOP VIEW
BOTTOM HINGE EXTENDS 1/4"(6)
FROM SIDE OF UNIT
UP TO 31/2"(89) FROM FLOOR
MODEL 245 – LOWER HINGE
Tabla de contenidos
Otros manuales de Refrigerador de Sub-Zero
Sub-Zero
Sub-Zero ICBBI-36F Manual de usuario
Sub-Zero
Sub-Zero UC-24BG Manual de usuario
Sub-Zero
Sub-Zero BI-36RG Instrucciones de montaje
Sub-Zero
Sub-Zero Built-in Series Manual de funcionamiento
Sub-Zero
Sub-Zero 648PRO Manual de usuario
Sub-Zero
Sub-Zero 601R Manual de usuario
Sub-Zero
Sub-Zero 736TCI Manual de usuario
Sub-Zero
Sub-Zero PRO 48 Manual de usuario
Sub-Zero
Sub-Zero CBBI-36R Guía
Sub-Zero
Sub-Zero IT36RRH Manual de usuario
Sub-Zero
Sub-Zero PRO 48 Instrucciones de montaje
Sub-Zero
Sub-Zero PRO3650 Manual de usuario
Sub-Zero
Sub-Zero IC-24FI Manual de usuario
Sub-Zero
Sub-Zero Sub-Zero 648PROG Manual de usuario
Sub-Zero
Sub-Zero Uc24crh Manual de usuario
Sub-Zero
Sub-Zero 400 Series Manual de instalación y operación
Sub-Zero
Sub-Zero 600 Series BI-36RG Manual de usuario
Sub-Zero
Sub-Zero BI-30UG Manual de usuario
Sub-Zero
Sub-Zero 700TF Manual del propietario
Sub-Zero
Sub-Zero Sub-Zero BI series Manual de servicio
