10
The same can be applied for O2 (Search ‘O2 APN settings’), Vodafone (search
‘Vodafone APN Setting’), EE (search ‘EE APN settings) etc.
Syncing the APN Information To The GPS Tracker
Once you have obtained the APN information, now you need to sync this
information to the GPS tracker. To do so, please follow the instructions below:
Please note, you would need to set the admin to your smartphone’s mobile, as
shown in the initial set up (see SMS Tracking Set Up), prior to conguring the
APN settings.
1. Send SMS command:
‘Apn123456_[APN of the network service provider for tracker’s SIM]’
You should receive a response saying ‘apn ok’.
2. Then, to sync the user info, send SMS command:
‘Apnuser123456_[APN user of the network service provider for tracker’s SIM]’
You should receive a response saying ‘apnuser ok’.
1P Mobile apn settings
Name: 1pMobile
APN: data.uk
User: user
Password: one2one.
Figure 4
To do this, you rst have to search for your network’s APN settings, then you
need to have to sync this information to your GPS tracker.
Search For Your Network’s APN Info
To set the APN, rst you would need the following from your network provider*:
•APN address •User info •Password
You can obtain this information from a search engine like Google. All you
need to do is type in the name of your network provider (e.g. 1P Mobile, O2,
Vodafone, EE, GiffGaff, Sky Mobile) followed by ‘APN settings’.
*This GPS tracker is not compatible with 3 network, please check with your
SIM card provider to see which network is used
For example, to nd the APN information for 1P Mobile, use the search term
‘1P mobile apn settings’ as shown in Figure 4.
