Streakwave PingBrother Series Manual de usuario
PingBrother®EPIW102,
EPIW104 & EPIW104P
industrial switch with managed passive POE
& watchdog functions
USER MANUAL
2
PingBrother series EPIW100 user manual
2011 Mikroweb Internet ltd.
EPIW104
User Manual
ver.1.3
PingBrother is watching your networ kdevices
CONTENT
Content............................................................................................2
Chapter 1.........................................................................................3
1.1 Preface............................................................................3
1.2 CE mark warning.............................................................3
1.3 FCC warning...................................................................4
Chapter 2.........................................................................................5
2.1 Physical description ........................................................5
2.2Channel states and configuration.....................................6
2.3Power input assignment...................................................6
2.4 Ethernet ports..................................................................7
2.5 POE selector slide switches............................................7
2.6 Application example figures ............................................8
Chapter 3.........................................................................................9
3.1 WEB based management ...............................................9
3.1.1 Status screen ....................................................9
3.1.2 IP Event & Actions configuration .....................10
3.1.3 Voltage Event & Actions configuration.............12
3.1.4 Current Event & Actions configuration.............14
3.1.5 Temperature Event & Actions configuration....16
3.1.6 Manual operation.............................................18
3.1.7 Manual ping.....................................................19
3.1.8 Password configuration...................................20
3.1.9 Network configuration......................................21
3.1.10 Time settings.................................................22
3.1.11 Email configuration........................................23
3.1.12 System log.....................................................24
3.1.13 Firmware update............................................26
3.2Reset the device ............................................................27
3.3 Co-use with a standard 802.3af POE PD-s...................27
Chapter 4.......................................................................................28
4.1 Technical specifications ................................................28
EPIW102..................................................................28
EPIW102..................................................................29
EPIW102..................................................................30
3
PingBrother series EPIW100 user manual
2011 Mikroweb Internet ltd.
EPIW104
User Manual
ver.1.3
PingBrother is watching your network devices
Chapter 1
1.1 Preface
PingBrother is a passive POE switch (PSE), that can work on nearly any low voltage
power (8-56V DC or 9-42V AC), and can distribute its input power to any kind of
connected standard or non standard POE devices (PD).
The POE output power can be fully managed either manually, remotely over the
network, or by its own built-in control system which works as an IP watchdog. Email
notification can be made about the events and responses.
It’s a great cost-effective multifunctional tool for unattended functioning network devices
such as IP cameras, Wifi radios, VOIP devices and switches, especially those which
have a POE support. By manually deactivating the POE function, PingBrother can
control any connected non-POE device by its relay contact outlets.
1.2 CE MARK WARNING
This is a Class-A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
4
PingBrother series EPIW100 user manual
2011 Mikroweb Internet ltd.
EPIW104
User Manual
ver.1.3
PingBrother is watching your network devices
1.3 FCC WARNING
This Equipment has been tested and found to comply with the limits for a Class-A digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radiofrequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
5
PingBrother series EPIW100 user manual
2011 Mikroweb Internet ltd.
EPIW104
User Manual
ver.1.3
PingBrother is watching your network devices
Chapter 2
2.1 Physical description
Figure 1
1. Reset button
2. Indicator LEDs (4 LEDs: EPIW104 & 104P, 2 LEDs: EPIW102)
3. Ethernet connectors (4 connectors: EPIW104 & 104P, 2 connectors: EPIW102)
4. Terminal block power connector
5. Relay contact outlets (4 outlets: EPIW104 & 104P, 2 outlets: EPIW102)
6. POE power selector slide switch (4 switches: EPIW104 & 104P,
2 switches: EPIW102)
7. Mounting brackets for wall installation
8. External temperature sensor connector (only EPIW104P)
6
PingBrother series EPIW100 user manual
2011 Mikroweb Internet ltd.
EPIW104
User Manual
ver.1.3
PingBrother is watching your network devices
2.2 Channel states and configuration
State of channels
Channel description in the web
based GUI of the device on off
State of relays 1-4 not energized energized
POE power out on eth 1-4 on off
LED indicators 1-4 on off
“no”outlet of
terminal blocks 1-4 open closed
“nc” outlet of
terminal blocks 1-4 closed open
Table 1
2.3 Power input assignment
There are two different options to power the device
Passive POE input on Ethernet port 1
(for pin allocation see Table2 on page 7)
External power Input through the Terminal Block connector
In both cases the power input can be:
9-42V AC or
8-56V DC
Please note, that in case of a reverse DC power input the device functions
properly, but the outgoing POE power polarity will also be reversed
compared to the default (See Table2 on page 6)
7
PingBrother series EPIW100 user manual
2011 Mikroweb Internet ltd.
EPIW104
User Manual
ver.1.3
PingBrother is watching your network devices
2.4 Ethernet ports
RJ45 Fast Ethernet 100Base-TX port with passive PoE extension
RJ45
Pin Color Function RJ45 pin for
Straight cable
(MDI, EIA/TIA568A)
RJ45 pin for
Crossover cable
(MDI, EIA/TIA568A)
1 Green Data TX + 1 3
2 Green/White Data TX - 2 6
3 Orange Data RX + 3 1
4 Blue POE power + 4 4
5 Blue/White POE power + 5 5
6 Orange/White Data RX - 6 2
7 Brown POE power - 7 7
8 Brown/White POE power - 8 8
Table 2
2.5 POE power selector slide switches
The POE power selector slide switches (Figure1 / 6) allow full flexibility of the device.
You can use them to select the input power that the unit gets, either via the terminal
block power connector or a POE input. With these switches, you can also select if the
POE power is output to the Ethernet ports or not.
Settings examples table
SW 1 SW 2-4 TB Power
connector Description
poe out on power in Power injector (Figure 2 on
page 7.)
poe in on not used Power distributor (Figure 3 on
page 7.)
poe in off power out POE separator function (Figure
3 on page 7)
poe off off power in Using with non POE device
Please note, that if the powering comes via Terminal Block connector, but
the SW1 is on “POE in” state, the POE power appears on the eth1 port and
you cannot turn this off with the software.
8
PingBrother series EPIW100 user manual
2011 Mikroweb Internet ltd.
EPIW104
User Manual
ver.1.3
PingBrother is watching your network devices
2.6 Application example figures
Figure 2
Figure 3
Figure 4
9
PingBrother series EPIW100 user manual
2011 Mikroweb Internet ltd.
EPIW104
User Manual
ver.1.3
PingBrother is watching your network devices
Chapter 3
Software configuration.
3.1 WEB-based management
The PingBrother can be configured locally or remotely via any web browser.
Default IP address: 192.168.1.234
Default username: admin
Default password: admin
3.1.1 Status screen
On the status screen you can check the current software and hardware version, input
voltage, device internal temperature, uptime, and the states of channels. The external
temperature, current and power consumption readings only appear in the EPIW104P
device. In case of an AC input, the voltage, current and power measurement do not work
properly with Firmware 1.4. This will be fixed in a later firmware version.
Figure 5
10
PingBrother series EPIW100 user manual
2011 Mikroweb Internet ltd.
EPIW104
User Manual
ver.1.3
PingBrother is watching your network devices
3.1.2 IP event & actions configuration
In this menu you can manage the IP watchdog functions.
Figure 6
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
