confirm to highlight it to red frame. Then clicking left or right will
move the widget left or right. The next confirm click will switch to
up/down movement. The next confirm click (widget frame will go
green) switches to horizontal scale adjustment, followed by vertical
scale change. One more confirm click will return the widget frame
to blue, so now it is again in list mode. In any step of widget
position/size adjustment, you can add another one or
change/remove highlighted widget by clicking options, where there
are also some other widget settings.
Home page widgets adjustment
When on any of the home pages, confirm clicks will list adjustable
widgets. If the value widget is highlighted (e.g. barometric altimeter),
click left or right or to change its value, then click confirm or just do
nothing, timeout will return automatically. To toggle the status widget
(e.g. flight stopwatch), press and hold to change its status. You can
use this method also to change zoom on map, FANET radar or
thermal trace widgets.
Shortcuts
You can add two specific actions to return and options buttons on
every home page. To assign, press and hold return or options until
ashortcutmenu will appear, then assign functionfrom list. Then click
return or options will activate the assigned action.
There are also two global shortcuts available. To set/activate them,
press and hold confirm until the menu bar is pulled up. Then click
return or options to activate shortcut, or press and hold to edit
assigned action.
Help notes
We understand that reading a long manual is not just boring, but
also useless if it is not followed by real user experience. Therefore
this user manual describes just principles of operation and deeper
description of each function is inside vario. If you navigate in the
settings or layout menu and there is little question mark in the right
bottom corner, then press and hold options to show description.
Click confirm or return to exit.
