Stewart Filmscreen Fixed Frame Screen Manual de usuario

TO THE INSTALLER: BE SURE TO LEAVE THIS MANUAL WITH THE OWNER.

CFS-010517

To the Owner

Installation Instructions

Screen Care

Maintenance

Owner’s Manual

Fixed Frame Screen

Printed in U.S.A.

Stewart Filmscreen reserves the right to make changes to the product specified in this document.

Sizes and specifications subject to change without notice at Manufacturer’s discretion. From time to time, this

document is updated. Current versions of documentation are posted on the Stewart Filmscreen website at:

www.stewartfilmscreen.com

To the Owner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Preparing the Installation . . . . . . . . . . . . . . . . . . . . . . . . . 5

Assembling the Frame . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Mounting the Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8

Attaching the Screen to the Frame . . . . . . . . . . . . . . . . . . . 9-10

Caring for & Cleaning the Screen . . . . . . . . . . . . . . . . . . . . . 11

Maintenance Notes . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13

Product Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Contents

Owner’s Manual

Fixed Frame Screen

About the Cima Fixed Frame Screen

Designed and manufactured in the USA by Stewart’s award winning team, your

Cima Fixed Frame screen supports a majority of projection applications. The

utilitarian design and features of this product address the needs of most common

residential and commercial 2-piece projection applications without compromising the

superior performance, quality and durability you have come to expect from Stewart.

The Cima Fixed Frame acts as a projection overscan border and the VeLux™ finish

is designed to absorb any overscanning.

Its angled corners and beveled edge bring the image area closer to the frame.

The frame features snaps that move on the frame to allow for adjustments.

The standard mount is a wall mount.

Using This Manual For Installation

The Cima Fixed Frame Screen is designed for ease of installation. There are no

user-servicable parts contained within the unit.

Congratulations on your purchase of one of our highly versatile Cima projection

screens, representing “Top of the Class” in standard commercial and residential

projection screens. Please take a moment to review this manual as it will help

ensure you many years of trouble-free service from your new Cima by Stewart

Filmscreen product.

TO THE OWNER

5Cima Fixed Frame Screen: Owner’s Manual

Be sure to unpack carefully in a clean area. Use special care when handling the screen

so that it does not become soiled or damaged. If you plan to repack your screen and

hardware for transportation to another location, you may wish to photograph or make a

note of how it was packed. Keep the packing material.

Unpacking

Note: Bolts and other fasteners for the screen are standard gauge and sizes used in

the U.S., regardless of where they will be installed. For this reason, the sizes are

expressed in inches rather than metric measurements.

♦Lint-free, clean cloth gloves for handling the screen

♦Ladders for the personnel supporting the screen during the mounting process

♦A level

♦Fasteners appropriate for the surface on which the screen is being mounted

♦A drill

♦Tools for tightening fasteners

You will need:

♦Make sure there is a clean surface on which to unroll the screen and assemble the

frame.

♦Check the size and weight of the screen to be installed so that you can plan for the

number of people required for installation. You need at least two people to

mount the smaller screens; more are needed for larger, heavier screens.

Before beginning the installation:

Specifications regarding the individual screen dimensions, weight, etc. are provided

by the factory when the unit is ordered.

Preparation

Before proceeding with the installation of this screen, take time to thoroughly

read and understand these installation instructions.

PREPARING THE INSTALLATION

♦Do not stand on the screen tube or store it on its end. This will cause screen

damage. If you are not going to install the screen immediately, make sure it remains

horizontal during storage.

Caution

Figure 1: Frame Rear View

1. Connect the frame members by matching the labels on the ends of each member. See

Figure 1.

2. Secure frame sections with the supplied bolts and allen wrench.

Be sure to work in a clean area that will not damage the frame.

ASSEMBLING THE FRAME

7Cima Fixed Frame Screen: Owner’s Manual

1. Identify the location of wall studs where you can securely mount the hanging bar.

2. Use a level to accurately position the hanging bar on the wall.

3. Drill holes through the bar into the studs.

4. Use the provided screws or other appropriate fasteners to secure the hanging bar to

the wall studs.

Note: A minimum of three (3) screws are recommended to safely secure the

frame.

5. Check to make sure the bar is level.

6. Assemble the frame (see page 6).

7. Hang the assembled frame, without the screen attached, on the hanging bar to ensure

that it is correctly mounted.

8. Mark on the wall where you will mount the steel pucks that will align with the magnets

fastened on the frame.

9. Remove the frame. Drill into the studs and mount the steel pucks with the

provided screws or other appropriate fasteners. Use shims as needed.

10. Reposition the frame, slide and secure the magnets so that they align with the steel

pucks mounted on the wall.

Note: Find studs that allow the pucks and magnets to be positioned approxi-

mately 12” to 24” from the edge of the frame on each side.

11. Remove the frame and follow the steps for attaching the screen to the frame (see

pages 9-10).

12. Your Fixed Frame is now ready to hang in its final position. See figures 2-5 on page 8.

To accurately position the frame, you will mount the hanging bar and temporarily

hang the frame prior to attaching the screen material. On the bottom of the frame,

there are magnets you can slide to line up with steel pucks you will align with wall

studs. If the wall is not perfectly flat, the force of the magnet may cause the frame to

bend. For this reason, shims can be placed between the wall and the steel pucks so

that the frame lays completely flat. The screen should not be attached to the frame

at this point. Refer to figures 2-5 on page 8.

Professional mounting techniques should be used. Stewart Filmscreen can

not be liable for substandard or faulty installations.

MOUNTING THE FRAME

Figure 4: Components for Wall Mounting - Side View Figure 5: Hanging the Screen - Side View

HANGING BAR

HANGING

BAR

PUCK

MOUNTING THE FRAME (CONTINUED)

Figure 3: Wall Mount Rear View

HANGING BAR

SCREEN

FRAME

Figure 2: Hanging Bar Front View

9Cima Fixed Frame Screen: Owner’s Manual

Figure 6: Unrolling the Screen

1. Remove the screen from the cardboard shipping tube.

2. On a clean surface, unroll the screen viewing side up.

3. Remove the protective foam from the screen material.

The viewing side of the projection screen is rolled to the inside to protect the optical

coating. The screen is rolled lengthwise.

Unpacking and Unrolling the Screen

♦Be careful not to touch or scratch the image surface with fingernails.

♦Do not use any tools to fasten the screen to the frame.

♦Do not fold or crease the screen.

Caution

DO NOT perform this step UNTIL instructed to do so in the mounting section.

ATTACHING THE SCREEN TO THE FRAME

If there are any wrinkles or puckers in the screen, the snaps on the frame can

be adjusted side to side. Lay the frame viewing side down on a clean surface.

A movement of 1/16” to 1/8” (1.6mm to 3.2mm) is usually sufficient to eliminate

puckers.

Note

Figure 8: Attaching Remaining Snaps

Figure 7: Attaching Top Corner Snaps

4. Place the frame over the screen (snap side down).

5. Starting with the snaps on the top corners and then horizontally along the top, while lifting

the frame with one hand, snap the screen into the frame. Gently allow the screen to

stretch onto the snaps. Do not jerk, wrinkle or crease the screen material, as it can be

damaged. Refer to Figure 7.

6. Lift the frame to a vertical position to finish attaching the sides and bottom rows of the

snaps. Refer to Figure 8.

Attaching the Screen to the Frame

ATTACHING THE SCREEN TO THE FRAME (CONTINUED)

Tabla de contenidos

Otros manuales de Pantalla de proyección de Stewart Filmscreen

Stewart Filmscreen

Stewart Filmscreen Luxus ScreenWall Series Manual de usuario

Stewart Filmscreen

Stewart Filmscreen Luxus Deluxe ScreenWall Manual de usuario

Stewart Filmscreen

Stewart Filmscreen AT 1.5 Manual de usuario

Stewart Filmscreen

Stewart Filmscreen Visionary Medio Manual de usuario

Stewart Filmscreen

Stewart Filmscreen ABT Trapdoor Electriscreen Manual de usuario

Stewart Filmscreen

Stewart Filmscreen Cine-W Manual de usuario

Stewart Filmscreen

Stewart Filmscreen RP-1013 Manual de usuario

Stewart Filmscreen

Stewart Filmscreen Cima Instrucciones originales

Stewart Filmscreen

Stewart Filmscreen Luxus Manual de usuario

Stewart Filmscreen

Stewart Filmscreen Balon Series Manual de usuario

Stewart Filmscreen

Stewart Filmscreen Visionary Manual de usuario

Stewart Filmscreen

Stewart Filmscreen 4-Way ScreenWall ElectriMask Manual de usuario

Stewart Filmscreen

Stewart Filmscreen Stealth Trapdoor Electriscreen Manual de usuario

Stewart Filmscreen

Stewart Filmscreen Vertical ES EM Manual de usuario

Stewart Filmscreen

Stewart Filmscreen Cabaret Manual de usuario

Stewart Filmscreen

Stewart Filmscreen WallScreen 2.5 Manual de usuario

Stewart Filmscreen

Stewart Filmscreen Balon Series Manual de usuario

Stewart Filmscreen

Stewart Filmscreen VistaScope Manual de usuario

Stewart Filmscreen

Stewart Filmscreen Visionary Electriscreen Manual de usuario

Stewart Filmscreen

Stewart Filmscreen Luxus Grande S6 Manual de usuario

Stewart Filmscreen

Stewart Filmscreen A Electriscreen Manual de usuario

Stewart Filmscreen

Stewart Filmscreen B Manual de usuario

Stewart Filmscreen

Stewart Filmscreen AB Electriscree Manual de usuario

Stewart Filmscreen

Stewart Filmscreen Balon Series Manual de usuario

Manuales populares de Pantalla de proyección de otras marcas

FART PRODUKT

FART PRODUKT Standard SCREEN Manual de usuario

Draper

Draper E Series Manual

Elite Screens

Elite Screens Elite Tripod Series Manual de usuario

Laarhoven

Laarhoven Companion II Manual de usuario

Renogy

Renogy RMS-LFPS-US Manual de usuario

Da-Lite

Da-Lite ExecutiveElectrol Manual de usuario

Samsung

Samsung S*H65* Manual de usuario

FONESTAR

FONESTAR PPTR-43100-FA Manual de usuario

Slide Clear

Slide Clear Varro XL Manual de usuario

Elite Screens

Elite Screens M85XWS1-SRM Manual de usuario

OS РХ-090Н Manual de usuario

Niko

Niko 10-845 Manual de usuario

Speaka Professional

Speaka Professional 2357532 Manual de funcionamiento

Sima

Sima XL-72 Manual de usuario

Jasic

Jasic EVO 2.0 ET-200P Manual de usuario

Elite Screens

Elite Screens Starling 2 Series Manual de usuario

InFocus

InFocus SC-WALL GRY-92H Manual

Barco

Barco OverView MVL-615 Manual de usuario