Stewart Filmscreen C Manual de usuario
TO THE INSTALLER: BE SURE TO LEAVE THIS MANUAL WITH THE OWNER.
LXSR-0903
Luxus A / SR-1
Electriscreen
To the Owner
Installation Instructions
Operating the Screen
Maintenance
OWNER’S MANUAL
Printed in U.S.A.
©2003 Stewart Filmscreen Corporation.
Contents
To The Owner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Preparing The Installation . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Step 1. Hanging The Case . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Step 2. Electrical Hook-up . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Adjusting The Screen Extension . . . . . . . . . . . . . . . . . . . . .14
Operating The Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Screen Care And Cleaning . . . . . . . . . . . . . . . . . . . . . . . . .16
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Luxus A/SR-1 Electriscreen: Owner’s Manual 1
Luxus A / SR-1
Electriscreen
OWNER’S MANUAL
Congratulations on your purchase of the finest optical viewing screen
available anywhere in the world!
Please take a moment to review this manual, it will help ensure you many
years of trouble-free service from your new Stewart Filmscreen product.
About your Luxus A Series Electriscreen
This is Stewart’s most popular electric roll up unit because it can
accommodate screen sizes up to 66” x 122” (LX138W). Typically, the
screen housing is hidden above the ceiling, and the screen descends
through a slot in the ceiling.
About your Luxus SR-1 Series Electriscreen
The SR-1 electric roll-up screen is identical to the Luxus A Series with the
exception that its housing is more styled and can be installed with minimal
architectural changes to your room.
The installation, operation, and care are the same for the Luxus A Series
and the Luxus SR-1 Series Electriscreens.
The size and weight of the various Luxus Electriscreen models are listed in
the charts in Figure 1.
Figure 1: Luxus Electriscreen models – sizes and weights
2Stewart Filmscreen Corporation
TOTHE OWNER
Video Format (4:3/1.33:1 Aspect Ratio)
Luxus A
Model #
Luxus SR-
1 Model #
Image
Diagonal
Image
Height
Image
Width
Weight
LX060V- SR060V- 60” 36” 48” 35 lbs.
LX072V- SR072V- 72” 43” 57” 40 lbs.
LX084V- SR084V- 84” 50” 67” 45 lbs.
LX090V- SR090V- 90” 54” 72” 50 lbs.
LX100V- SR100V- 100” 60” 80” 55 lbs.
LX120V- SR120V- 120” 72” 96” 65 lbs.
Luxus A/SR-1 Electriscreen: Owner’s Manual 3
HDTV Format (16:9/1.78:1 Aspect Ratio)
Luxus A
Model #
Luxus SR-
1 Model #
Image
Diagonal
Image
Height
Image
Width
Weight
LX082H- SR082H- 82” 40 1/2” 72” 50 lbs.
LX092H- SR092H- 92” 45” 80” 55 lbs.
LX100H- SR100H- 100” 49” 87” 60 lbs.
LX110H- SR110H- 110” 54” 96” 65 lbs.
LX123H- SR123H- 123” 60” 107” 70 lbs.
LX135H- 135” 66” 118” 70 lbs.
Wide Screen Format (1.85:1 Aspect Ratio)
Luxus A
Model #
Luxus SR-
1 Model #
Image
Diagonal
Image
Height
Image
Width
Weight
LX082W- SR082W- 82” 39” 72” 50 lbs.
LX091W- SR091W- 91” 43” 80” 55 lbs.
LX100W- SR100W- 100” 48” 89” 60 lbs.
LX114W- SR114W- 114” 54” 100” 70 lbs.
LX126W- SR126W- 126” 60” 111” 75 lbs.
LX138W- 138” 66” 122” 70 lbs.
A/V Format (1:1 Aspect Ratio)
Luxus A
Model #
Luxus SR-
1 Model #
Image
Diagonal
Image
Height
Image
Width
Weight
LX050A- SR050A- 71” 50” 50” 40 lbs.
LX060A- SR060A- 85” 60” 60” 45 lbs.
LX070A- SR070A- 99” 70” 70” 50 lbs.
LX084A- SR084A- 119” 84” 84” 60 lbs.
Preparation
Specifications regarding the individual screen dimensions, weight, mounting
type, and controls are provided by the factory when the unit is ordered.
Before beginning the installation:
Check the specifications for the type of mounting and switch
control to be used.
Ensure that the mounting area and electrical connection are
prepared.
Check the size and weight of the screen to be installed so that
you can plan for the number of people required for the mounting
procedure. You need at least two people to mount the smaller
screens; more are needed for larger, heavier screens.
You will need:
Enough ladders for the personnel supporting the screen during
the mounting process
A level
Fasteners appropriate for the surface on which the screen is
being mounted (See instructions for the type of mount for
recommendations.)
4Stewart Filmscreen Corporation
PREPARING THE INSTALLATION
Before proceeding with the installation of this screen,
be sure to read and understand all the installation and
operating instructions thoroughly.
All electrical wiring installations must conform to local
and national codes and should be performed by
qualified service personnel.
There are no user-serviceable parts contained within the
unit.
Caution
During installation, do not place the unit on an unstable cart,
stand, table, or ladder. The unit may fall, causing injury to a
child or adult and damage to the unit.
Unpacking
1. Remove the outer plastic covering and white wrapping paper
surrounding the screen case.
2. Do not remove the wrapping paper surrounding the screen roller.
You should remove it only after the unit is hung and all electrical
connections have been made.
3. Remove the batten lock-down screws located on the back side of
the case.
Luxus A/SR-1 Electriscreen: Owner’s Manual 5
Warning!
Failure to remove the batten lock-down screws can result in
permanent damage to the screen.
Professional mounting techniques should be adhered to. Stewart
Filmscreen Corporation cannot be liable for substandard or faulty
installations.
Make sure that you mount the screen so that the electrical box is on the left
side (audience left).
Wall installation
1. Mount screen through the holes in the wall mount brackets. Refer
to Figure 2.
– If mounting onto a wood substructure, #12 screws may be used.
– If the unit is to be mounted to plaster, drywall, masonry, or other-
type of surface, use an appropriate fastener. (These might include
toggle or molly bolts or similar fasteners.)
2. Make sure the unit is level.
Ceiling or top mount installation
The Luxus Electriscreen can be installed into the ceiling or soffit. A false
ceiling is not intended to support the weight of a Luxus Electriscreen.
Make sure that you mount the screen so that the electrical box is on the left
side (audience left). Refer to Figure 3.
If the unit is to be mounted to plaster, drywall, masonry, or other type of
surface, use an appropriate fastener. (These might include toggle or molly
bolts or similar fasteners.)
There are two types of ceiling or top mount: recessed or suspended. Follow
the procedure for the specified type of mounting.
6Stewart Filmscreen Corporation
Figure 3: Ceiling or top mount
STEP 1. HANGING THE CASE
Figure 2: Wall mount using
optional brackets
Electrical Connection
Box (behind end plate)
Electrical
Knockout
(optional)
Socket
Cap
Screws
Recessed or concealed mount
You can install the screen so that the motor is recessed and the bottom is
flush with dry wall or a suspended ceiling. Refer to Figure 4.
1. Attach the supplied ceiling mount brackets to the top of the
screen unit.
2. Install the unit onto the support structure making sure that the
bottom of the case is flush with the finished ceiling.
3. Make sure the unit is level.
Suspended installation
When suspended installation is desired, use the eyebolts that are provided
with the screen.
1. Remove the screw farthest from the end plate. Install the eyebolt
at that central pivot location. Repeat on the opposite end.
2. Suspend the unit from the eye bolts on the unit using chains,
cables, or turnbuckles. Refer to Figure 5.
3. Make sure the unit is level.
Luxus A/SR-1 Electriscreen: Owner’s Manual 7
Figure 4: Recessed or
concealed mount
Figure 5: Suspended
installation
Support Structure
Drywall or
suspended
ceiling
The motor requires standard 120V 60 Hz input (unless an alternate voltage
has been specified). All connections are made to the electrical box on the
side of the Luxus unit (audience left).
In addition to the standard high-voltage 3-position switch, there are optional
switch controls available for the Luxus Electriscreen. Follow the installation
procedure for the type of switch control you will install.
General suggestions for wiring:
Soldering is recommended.
The use of wire nuts is acceptable.
On models not provided with armored whip, a romex connector
should be installed in the appropriate electrical KO (Knock Out).
To open the electrical box, remove the two socket cap screws that attach
the end plate to the unit’s case.
Refer to Figure 6 for an illustration of the electrical connection box on the
side of the screen unit.
The standard electrical hook up is through the large black electrical
grommet located on the back side of the case adjacent to the end plate.
An optional electrical knockout has been provided should the particular
installation require that the electrical connection be made through the side
end plate.
8Stewart Filmscreen Corporation
STEP 2. ELECTRICAL HOOK-UP
Caution
Professional techniques need to be adhered to when making
any electrical connection. A qualified electrician should
perform these procedures.
Be sure to follow all standard safety procedures for installing
electrical devices.
Do not disassemble or alter the configuration of the motor or
the unit's electrical connections. This may cause injury to you
or damage to the product.
The electrical connection should be made only to the type of
power source indicated on the marking label.
Figure 6: Electrical connection
box
Electrical Connection
Box (behind end plate)
Electrical
Knockout
(optional)
Socket
Cap
Screws
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Pantalla de proyección de Stewart Filmscreen
Stewart Filmscreen
Stewart Filmscreen B Manual de usuario
Stewart Filmscreen
Stewart Filmscreen Luxus Grande S6 Manual de usuario
Stewart Filmscreen
Stewart Filmscreen AT 1.5 Manual de usuario
Stewart Filmscreen
Stewart Filmscreen A Electriscreen Manual de usuario
Stewart Filmscreen
Stewart Filmscreen Luxus ScreenWall Series Manual de usuario
Stewart Filmscreen
Stewart Filmscreen Cima Instrucciones originales
Stewart Filmscreen
Stewart Filmscreen 4-Way ScreenWall ElectriMask Manual de usuario
Stewart Filmscreen
Stewart Filmscreen Visionary Electriscreen Manual de usuario
Stewart Filmscreen
Stewart Filmscreen Balon Series Manual de usuario
Stewart Filmscreen
Stewart Filmscreen Vertical ES EM Manual de usuario
Stewart Filmscreen
Stewart Filmscreen Visionary Manual de usuario
Stewart Filmscreen
Stewart Filmscreen AB Electriscree Manual de usuario
Stewart Filmscreen
Stewart Filmscreen LCD Rear-Projection TV Manual de usuario
Stewart Filmscreen
Stewart Filmscreen Fixed Frame Screen Manual de usuario
Stewart Filmscreen
Stewart Filmscreen Cabaret Manual de usuario
Stewart Filmscreen
Stewart Filmscreen Balon Series Manual de usuario
Stewart Filmscreen
Stewart Filmscreen WallScreen 2.5 Manual de usuario
Stewart Filmscreen
Stewart Filmscreen Visionary Medio Manual de usuario
Stewart Filmscreen
Stewart Filmscreen Cine-W Manual de usuario
Stewart Filmscreen
Stewart Filmscreen Luxus Deluxe ScreenWall Manual de usuario
